Equipment for Hazardous Areas
ATEX certificated
to directive 94/9/EC requirements |
|
 |
EQUIPMENT FOR
HAZARDOUS AREAS
(pdf catalogue) |
A comprehensive
range of hazardous area equipment for use within many areas
of industry.
ATEX equipment
includes: |
 |
Engine bellhousings
Due
to custom nature of these components they can be certificated on request to directive 94/9/EC
II2GD-IM2-T6
Harmonised standards EN13463-4, EN13463-5, EN50303, EN13463-1
. . . read
more
|
Screw pumps
std according
to API 676, for mineral and lubricating oils also fluids with
low lubricating properties (water+oil, HFC, LFO, HFO). Flows
up to 5,000 litres per minute and pressure up to 130 bar (200
bar peak) . . . read more |
 |
 |
GGR cast iron bellhousings
Cast
iron bellhousings also available in high strength iron. Also
produced to suit NEMA motor flange dimensions without the use
of adaptor plates. One-piece component founded in the UK with
minimal (trace) aluminium, magnesium, titanium and zirconium
content . . . read
more
|
Thermostat
types TRI
Thermostat
with expanding liquid probe, particularly suitable for automatic
setting of the temperature of liquids as well as other applications
in the field of industrial heating . . . read more
|
 |
 |
JXL anti-static flywheel
couplings
have
been produced in accordance with the requirements specified within
Directive 94/9/EC II2GD-IM2-T6
Harmonised Standards EN13463-4, EN13463-5, EN50303, EN13463-1 .
. . read
more |
Float
switches types 1E-AN1 and 1E-AN2
Connecting
head made in cast steel according to European standards EN 50014,
EN 50018 EEX DII CT 6 [zone 1] (alternative specification available
on request) as covered by certificates CESI AD 82.072.
. . . read
more |
 |
 |
JXL anti-static
couplings
The
couplings do
not produce static
and do
not sustain burning.
Maximum shaft diameters up to 400mm with torques of 300,000Nm
and speeds upto 11,000rpm can be accommodated . . . read
more |
Hydraulic radial piston motors
with
fixed and adjustable displacement, conform with ATEX directive
94/9/EC, applied standards EN 1127-1, EN 13463-1, EN 13463-5
. . . read
more
|
 |
 |
|
jbj
Techniques Limited is ISO certificated, committed to international
coordination & unification of industrial standards |
© Copyright, jbj Techniques Limited,
28 Trowers Way, Holmethorpe Industrial Estate, Redhill, Surrey
RH1 2LW. United Kingdom of Great Britain. telephone: +44(0)1737
767493 email:info@jbj.co.uk
E. & O. E., Disclaimer: Information throughout this web-site
relevant to design, materials and/or specifications are subject
to change without notice and liability therefore.
|
