SITEX® gear couplings available from jbj Techniques Limited

® ® SITEX & SITEX FL GEAR COUPLINGS 07 20

an excellence in engineering www.jbj.co.uk/couplings.html ® patented Elika profile is everything 01737 767493 info@jbj.co.uk www.jbj.co.uk - registered in England No: 1185469 - jbj Techniques Limited is ISO certificated, committed to international coordination & unification of industrial standards. A range of products ATEX certificated to directive 94/9/E requirements You Tube

www.jbj.co.uk/couplings.html #DriveLineHarmony Contents SITEX® Gear Couplings Page ® SITEX Introduction ............................................................................ 1 ® SITEX Dimensions & Ordering Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 CouplingSelection ............................................................................. 3 Taper & Splined Bores . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ® NYLEX Dimensions & Ordering Code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ® SITEX FL.................................................................................... 6 FlangeDimensionsinAccordancewithSAEJ620..................................................... 7 Special Flange Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 TechnicalCharacteristics ........................................................................ 9 Assembly.................................................................................... 10 Spline Bore Hub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 SITEX®FLCouplingSelection.................................................................... 12 #DriveLineHarmony............................................................................ 13 I The details contained within this catalogue are reproduced in accordance with the latest information at publication of this catalogue. Errors & Omissions Excepted Last update: 01/07/2020

www.jbj.co.uk/couplings.html #DriveLineHarmony Introduction ® SITEX Gear Couplings 1 Description ® SITEX couplings consist of two toothed hubs which are connected with one internally toothed sleeve. The hubs are made of steel and the teeth, which are both profiled and section crowned, are milled. The sleeve is manufactured from stabilized 6.6 super-polyamide resin. Features ® SITEX couplings are members of the elastic coupling family range. Sitex couplings are well suited for applications with axial, radial, and angular displacement of the connected shafts. The double cardanic action eliminates the imposition of loads on the shafts which results from radial and axial misalignment. The torsional rigidity of the sleeve prevents angular speed variation.The combination of steel hubs with Polyamide sleeve makes the coupling maintenance and lubrication free. The particular toothed profile prevents contact of tooth edges with the sleeve, ensuring long life of the coupling. Performance Mounting can be in both the horizontal and vertical planes. Installation is simple and quick, which lowers installation costs. The coupling is suitable for operating in temperatures ranging from - 25 °C to + 90 °C. For short intervals, temperatures of + 125 °C can be tolerated. Components of the coupling are resistant to all types of lubricants and hydraulic fluids. ATEX Directive 2014/34/EU It is possible to ask for specific certification for use in hazardous area according to ATEX Directive 2014/34/EU. SITEX® couplings are available with specific mounting/operating instruction manual and conformity. For information, please contact our technical office. GDM...F.. AD GDM.. GDM...L Standard couplings Long hub execution

www.jbj.co.uk/couplings.html #DriveLineHarmony Dimensions & Ordering Code ® SITEX Gear Couplings 2 125 270 192 45 125 - 140 - 10 78 134 290 M10 20 100 210 152 36 100 - 110 - 8 63 102 228 M10 20 80 175 124 - 80 - 90 - 6 46,5 93 186 M10 20 65 142 96 19 65 38 - 42 - 48 - 55 - 60 70 140 4 35,5 73 144 M10 20 48 100 68 19 48 32 - 38 - 42 - 48 50 110 4 27 50 104 M8 10 42 92 65 14 42 25 - 28 - 32 - 38 - 42 42 110 4 51 88 M8 10 38 83 58 14 38 24 - 28 - 32 - 38 40 80 4 18 48 84 M8 10 32 76 50 14 32 22 - 24 - 28 - 32 40 60 4 17,5 48 84 M8 10 28 66 43 11 28 16 - 19 - 22 - 24 - 28 40 60 4 18,5 47 84 M8 10 24 52 35 11 24 14 - 19 - 20 - 22 - 24 26 50 4 7,5 41 56 M5 6 19 48 30 8 19 11 -14 -19 25 - 4 8,5 37 54 M5 6 14 40 24,5 8 14 11 - 14 23 30 4 6,5 37 50 M5 6 * = Up to size 24, set-screw is 180° from keyway; from size 28 set-screw is set onto the keyway. Keyway according to DIN 6885 sheet 1 - JS9 ® Due to compact dimensions and excellent performances, SITEX couplings may be used in a wide range of applications. Couplings are available from stock, both the standard and the “long” hub execution, which entirely covers the motor shaft. ® SITEX hubs are available with certain stock bores as listed below. The standard solid hub has a pilot centre concentric to the hub OD and can be bored to specific needs. Approved according to ATEX Directive. Size D mm d mm C mm CL mm b mm a mm h mm L mm f mm p mm min max UNI keyway and set-screw* mm F (H7) 18,5 Ordering Code GDM 48 F32 GDM: SITEX® hub Size L: long hub execution F...: bore diameter Hub AD 48 AD: SITEX® sleeve Size Sleeve CL C C a a p F h L d D f b Long hub

www.jbj.co.uk/couplings.html #DriveLineHarmony Ka Δ axial misalignment wKΔ angular misalignment Kr Δ radial misalignment rKΔ wKΔ both angular and radial misalignment ∆Kw 100% ∆Kr 100% Size 19 0,000054 24 0,000088 32 0,000572 38 0,000877 48 0,001869 80 0,036774 100 0,095742 14 0,000026 28 0,000312 42 0,001467 65 0,010542 125 16 21 60 81 142 700 1210 10 45 100 380 2500 48 63 180 243 426 2100 3630 30 135 300 1140 7500 8 10,5 30 40,5 71 350 605 5 22,5 50 190 1250 0,8 1,1 3,1 4,2 7,4 36,6 63,4 0,5 2,4 5,2 19,9 130,9 2,5 3,3 9,4 12,7 22,4 109,9 190,1 1,6 7,1 15,7 59,7 392,7 1,3 1,6 4,7 6,4 11,2 55,0 95,0 0,8 3,5 7,9 29,8 196,3 3,8 4,9 14,1 19,1 33,6 164,9 285,1 2,4 10,6 23,6 89,5 589,0 1,7 2,2 6,3 8,5 14,9 73,3 126,7 1,0 4,7 10,5 39,8 261,8 5,0 6,6 18,8 25,4 44,8 219,9 380,1 3,1 14,1 31,4 119,4 785,3 2,5 3,3 9,4 12,7 22,3 109,9 190,1 1,6 7,1 15,7 59,7 392,7 5,0 6,6 18,8 25,4 44,6 219,9 380,1 3,1 14,1 31,4 119,4 - 15,1 19,8 56,5 76,3 134,3 659,7 1140,3 9,4 42,4 94,2 358,1 - 11.800 10.500 7.600 6.700 5.580 3.100 3.000 14.000 8.500 6.000 4.000 2.100 0,24 0,30 0,99 1,20 1,79 11,7 20,4 0,18 0,73 1,62 5,28 43,3 0,329397 ±1 ±1 ±1 ±1 ±1 ±1 ±1 ±1 ±1 ±1 ±1 ±1 ±0,3 ±0,3 ±0,4 ±0,4 ±0,4 ±0,7 ±0,8 ±0,3 ±0,4 ±0,4 ±0,6 ±1,1 ±1 ±1 ±1 ±1 ±1 ±1 ±1 +1 ±1 ±1 ±1 ±1 7,5 9,9 28,3 38,2 67,1 329,8 570,2 4,7 21,2 47,1 179,1 1178,0 TKN (Nm) Tkmax (Nm) Tkw (Nm) std. max. std. max. std. max. std. max. std. max. -1 n = 500 (min ) -1 n = 750 (min ) -1 n = 1000 (min ) -1 n = 1500 (min ) -1 n = 3000 (min ) nmax -1 (min ) W* (kg) J* 2 (kg.m ) ∆Ka (mm) ∆Kr (mm) ∆Kw (mm) (kW) Coupling Selection ® SITEX Gear Couplings *= Values are for complete couplings, max bore diameter, only. Selection According toTorque ® The maximum starting torque of the driver or driven machine must not exceed the maximum torque capacity of SITEX . With uniform loading and well aligned ® ® shafts, SITEX can be operated at all torques up to the maximum. In case of irregular torque, consider that the SITEX coupling can bear peak loads up to 3 times the nominal torque indicated. The values shown in the table for radial and angular misalignment, must be adjusted in cases where they are simultaneously acting on the coupling. The sum of the admissible value (A) and the respective values shown in the table must be lower or equal to 1. Mounting Instructions » Attach the hubs to the shafts, taking care to align the inner surfaces with the corresponding shaft ends. » Insert the sleeve on the two hubs adjusting the distance (dimension “b”) of the same ones trying at the same time to align the two shafts as much as possible. » Tighten into position the two elements to be coupled. » Before rotating the coupling, be sure the sleeve is free to move axially. 3 T Coupling nominal torque Nm KN T Coupling maximum torque Nm Kmax W Weight kg J Coupling moment of inertia kgm2 ΔK Maximum axial misalignment mm a ΔK Maximum radial misalignment mm r ΔK Maximum angular misalignment ° w n Maximum rpm min-1 max

www.jbj.co.uk/couplings.html #DriveLineHarmony c3 29,75 8 17 50 54 60 54 60 55 70 c1 19,95 5 12,1 32 35 50 42 50 45 50 45 50 Size dØ + 0.5 JS9 b 2 t + 0.1 l k 14 dk 12k 19 dk 12k 24 dk 12k 28 dk 12k 32 dk 12k 38 dk 12k 42 dk 12k 48 dk 12k 65 dk 12k Taper 1:8 for ATOS - CASAPPA - GARBE LAHMEYER - JOTTI & STROZZI - MARZOCCHI - SALAMI - SAUER FLUID Taper 1:10 for PARKER HANNIFIN NMF - TEVES Taper or Splined Bores ® SITEX Gear Couplings 4 1:8 1:10 l2 dk l2k b d lk 1:5 dk d lk l2k 2t b a1 9,85 2 1 11,5 18 23 22 25 24 26 35 26 36 26 45 26 a2 16,85 3 1,8 18,5 25 30 28 30 35 40 36 40 45 40 45 42 45 42 45 50 a8 39,85 6 2,6 41,5 52 60 65 70 a7 34,85 6 2,6 36,5 52 60 55 60 a6 29,85 6 2,6 31,5 45 55 45 55 45 55 55 55 a4 21,95 3 1,8 21,5 30 26 32 40 32 40 42 40 45 42 a5 24,85 5 2,9 26,5 35 40 36 40 45 40 45 42 45 42 55 50 a3 19,85 4 2,2 21,5 28 36 35 40 36 40 45 40 45 42 45 42 45 50 b17 41,15 8 3,1 42 48 60 55 60 b16 43,057 7,95 3,378 51 b15 33,176 7 18,8 44 45 60 55 62 b14 33,176 6,38 18,8 44 44 60 45 60 45 60 55 62 b13 28,45 6 15,1 38,5 42 60 45 60 b12 27 4,78 15,3 32,5 42 50 b11 25,463 5 15,5 36 34 50 45 50 45 50 55 62 b10 25,463 4,78 15,1 36 34 50 36 50 42 50 45 50 45 50 55 62 b9 22,002 3,99 12,4 28 32 40 36 40 42 40 45 42 45 42 55 50 b8 17,287 3 9,7 24 28 35 42 40 45 42 b7 17,287 4 10,3 24 28 35 32 40 36 40 42 40 45 42 45 42 45 50 b6 17,287 3,2 9,6 24 28 35 32 40 36 40 42 40 45 42 45 42 45 50 b5 14,3 3,2 8,5 19,5 b4 14 3 8,5 17,5 20 23 24 30 24 30 32 30 36 40 b3 13 2,4 7,3 21 26 30 32 30 32 30 b2 11,6 3 7,1 16,5 18 23 26 26 32 30 b1 9,7 2,4 6 17 18 26 19 25 24 26 35 30 36 30 36 30 c2 24,95 6 14,1 45 36 55 45 60 45 60 55 60 Taper 1:5 for BOSCH - BUCHER - LEDUC - DÜSTERLOH

Nylex Dimensions & Ordering Code ® SITEX Gear Couplings Size 19 24 14 14 10 6 19 24 14 18 - 19 19 - 20 - 24 14 31.5 37.5 25 min max UNI keyway & set screw (mm) UNI keyway & set screw (mm) nmax -1 (min ) 14 10 6 19 24 14 min max TKN (Nm) Tkmax (Nm) Tkw (Nm) 6.000 6.000 6.000 14 - 17 - 19 10 - 14 - 16 - 19 - 20 - 24 7 - 9 - 10 - 11 - 12 - 14 40 40 26 48 52 40 25 26 23 25 26 23 52 54 48 2 2 2 42 45 40 9 10 8 23 25 23 19 20 17 8 12 5 16 24 10 4 6 2.5 D2 (mm) DH (mm) L1 (mm) L2 (mm) E (mm) L (mm) LH (mm) M (mm) F (mm) G (mm) d1 (mm) d2 (mm) Size 19 24 14 31.5 37.5 25 UNI keyway & set screw (mm) nmax -1 (min ) 14 10 6 19 24 14 min max TKN (Nm) Tkmax (Nm) Tkw (Nm) 6.000 6.000 6.000 14 - 17 - 19 10 - 14 - 16 - 19 - 20 - 24 7 - 9 - 10 - 11 - 12 - 14 48 52 40 25 26 23 25 26 23 54 56 50 4 4 4 37 41 37 8.5 7.5 6.5 8.5 7.5 6.5 8 12 5 16 24 10 4 6 2.5 DH (mm) L1 (mm) L2 (mm) E (mm) L (mm) LH (mm) M (mm) N (mm) d2 (mm) D (mm) Ordering Code GDN 14 F14 GDM: SITEX® NYLEX hub ® GDNV: NYLEX sleeve hub SITEX Size F...: bore diameter Hub AD 24 AD: SITEX® NYLEX sleeve Size ‘C’ Execution Sleeve T Coupling nominal torque Nm KN T Coupling maximum torque Nm Kmax T Torque with reversal transmissible by the coupling Nm KW n Maximum rpm min-1 max D1 (mm) D LH N M L DH E L1 L2 d2 d1 D d2 d1 D1 DH D2 G F LH M L L2 L1 E CV C AD SITEX® Nylex couplings are made of 100% Polyamide. Two executions are available: » CV: in 2 parts (1 hub and one sleeve including the hub); » C: in 3 parts (2 hubs and one sleeve). Designed for light applications, low cost and available with finished bore keyway and thread for set screw. Temperature range: - 25°C to + 90°C. Approved according to ATEX Directive. www.jbj.co.uk/couplings.html #DriveLineHarmony 5

SITEX® FL Couplings ® SITEX Gear Couplings ® The SITEX FL couplings are designed for optimizing the connections between reciprocating engines and driven equipment such as pumps, compressors, generators, etc. ® SITEX FL couplings consist of a steel hub and fibreglass reinforced polyamide flange which offers both mechanical strength and dimensional stability in a ® variety of temperature ranges. The special teeth allow SITEX FL couplings to compensate for small misalignments thus avoiding wear. The steel-Polyamide coupling allows maintenance free continuous operation. Approved according to ATEX Directive. Main characteristics and advantages Minimum dimensions: The entire coupling is usually installed inside an engine housing, minimizing the axial dimensions thus reducing the tools required for installation. Axial misalignments: The hub toothing can move freely axially inside the Polyamide flange avoiding axial forces which may arise on the pump shaft. Heat stability: The special fibreglass reinforced Polyamide flange is designed to operate in internal combustion engine environments without air cooling and up to 140° C. ® Maintenance free: The SITEX FL joints are maintenance and lubrication free. ® Quick assembling: Blind assembly makes installation of the SITEX FL quick and easy. Angular misalignments: The special teeth allow angular misalignment correction, protecting the bearings against angular forces. ® Stiffness: The stiffness of the SITEX FL coupling allow for torsionally vibration-free operation. ® The SITEX FL couplings are used in connections between the flywheels of the internal combustion engines and: hydro-pumps, rotating pistons, and compressor blades. www.jbj.co.uk/couplings.html #DriveLineHarmony 6

www.jbj.co.uk/couplings.html #DriveLineHarmony D D1 D2 D3 df x z L1 L2 L3 L4 L5 L6 GDF 42 FL 6 1/2’’ 42 65 100 200,02 215,9 9 x 6 2 33 42 20 13 40 GDF 42 FL 7 1/2’’ 42 65 100 222,25 241,3 9 x 8 42 3 42 20 13 40 GDF 42 FL 8’’ 42 65 100 244,47 263,52 11 x 6 42 33 42 20 13 40 GDF 42 FL 10’’ 42 65 100 295,27 314,32 11 x 8 42 33 42 20 13 40 GDF 48 FL 6 1/2’’ 48 68 100 200,02 215,9 9 x 6 50 41 50 20 13 48 GDF 48 FL 7 1/2’’ 48 68 100 222,25 241,3 9 x 8 50 41 50 20 13 48 GDF 48 FL 8’’ 48 68 100 244,47 263,52 11 x 6 50 41 50 20 13 48 GDF 48 FL 10’’ 48 68 100 295,27 314,32 11 x 8 50 41 50 20 13 48 GDF 48P FL 6 1/2’’ 48 68 100 200,02 215,9 9 x 6 50 38 45 20 13 46 GDF 48P FL 7 1/2’’ 48 68 100 222,25 241,3 9 x 8 50 38 45 20 13 46 GDF 48P FL 8’’ 48 68 100 244,47 263,52 11 x 6 50 38 45 20 13 46 GDF 48P FL 10’’ 48 68 100 295,27 314,32 11 x 8 50 38 45 20 13 46 GDF 55 FL 7”1/2 55 85 115 222,25 241,30 9 x 8 50 37 48 24 13 48 GDF 65 FL 8’’ 65 96 132 244,47 263,52 11 x 6 70 60 69 27 21 66 GDF 65 FL 10’’ 65 96 132 295,27 314,32 11 x 8 70 60 69 27 21 66 GDF 65 FL 11 1/2’’ 65 96 132 333,37 352,42 11 x 8 70 60 69 27 21 66 GDF 65P FL 8’’ 65 93 132 244,47 263,52 11 x 6 70 60 69 27 21 66 GDF 65P FL 10’’ 65 93 132 295,27 314,32 11 x 8 70 60 69 27 21 66 GDF 65P FL 11 1/2’’ 65 93 132 333,37 352,42 11 x 8 70 60 69 27 21 66 GDF 80 FL 11 1/2’’ 80 124 170 333,37 352,42 11 x 8 90 78 87 30 21 87 SAE flange size Max. Bore Dimensions (mm) Flange Dimensions in Accordance with SAE J620 ® SITEX Gear Couplings 7 Ordering Code GDM 48 F32 GDM: SITEX® hub Size L: Long hub execution F...: bore diameter Hub 48P and 65P are for hubs with over-sized toothed disc. GDF 65 FL11-¹⁄ GDF: SITEX® FL flange Bore SAE flange size Flange D3 D L5 L4 L2 L6 df L1 D1 D2 B B L5 D1 D D3 df L4 L3 D2 1 1 L Fig. A A Fig.2 ® SITEX FL

www.jbj.co.uk/couplings.html #DriveLineHarmony Special Flange Dimensions ® SITEX Gear Couplings D2 (mm) D3 (mm) D4 (mm) F (mm) G (mm) df x z GDF 48 FL 125 48 80 - 100 125 27 30 11 x 3 GDF 48 FL 165 48 98 125 142 165 10 20 13 x 6 GDF 48P FL 165 48 98 125 142 165 10 20 13 x 6 GDF 65 FL 190 65 125 140 160 190 13 57 11 x 6 GDF 65 FL 208 65 125 144 180 208 20 40 18 x 8 GDF 65P FL 208 65 125 144 180 208 20 40 18 x 8 CCV B 6 Flywheel bellhousing ‘B’ type SAE type for engine flange Flywheel bellhousing Ordering Code B/4 SAE type pump flange and number of pump mounting holes CCV 6 B/4 8 Special Flange Size Maximum Bore D1 (mm) Flywheel Bellhousing The dimensions of the flywheel Bell housing plates are in accordance with SAE 617. B d Wf D f C A-A Section Wf f C D M Z= n. of holes M K2/S4 R R R A A Type:CCV Type:CCVB B d R SAE - Flywheel Bellhousing SAE type D (mm) B (mm) C (mm) Number of holes Z f (mm) CCV CCVB Wf SAE 6 266,7 308 285,8 8 11 10,5 - SAE 5 314,32 356 333,4 8 11 10,5 25 SAE 4 361,95 403 381 12 11 10,5 35 50 SAE 3 409,58 451 428,6 12 11 10,5 50 SAE 2 447,68 489 466,7 12 11 14 - Pump assembly SAE dimensions SAE Pump Center bore d (mm) Pump mounting holes n. 2 holes n. 4 holes K2 M S4 R AA 50,8 82,6 M8 5/16" - - - A 82,55 106,4 M10 3/8" 104,6 M10 ³⁄ " B 101,6 146 M12 1/2" 127 M12 ¹⁄ " C 127 181 M16 5/8" 162 M12 ¹⁄ " D 152,4 228,6 M16 5/8" 228,6 M16 ⁵⁄ " ØD4 ØD1 ØD3 F G df GDF 48 FL 125 ØD3 ØD2 ØD4 ØD1 df 4 F G GDF 48 FL 165 GDF 48P FL 165 ØD4 ØD1 G F df ØD2 ØD3 15 GDF 65 FL 190 G 10 F df 28 12 ØD3 ØD2 ØD4 ØD1 GDF 65 FL 208 GDF 65P FL 208

www.jbj.co.uk/couplings.html #DriveLineHarmony Technical Characteristics ® SITEX Gear Couplings Selection For a proper sizing a safety factor k = 1,3 – 1,6 must be considered in accordance to the application. Or, the coupling nominal torque must be greater than or equal to the engine torque multiplied by k: TKN ≥ TN ∙ k TKN = coupling nominal torque TN = engine side torque k = safety factor selected in accordance with the use Applications k factor Tandem rollers 1.6 Asphalt processing machines 1.4 Agricultural machines 1.4 Fork lift trucks 1.6 Concrete Mixer 1.3 Self-propelled cranes 1.4 Excavators 1.4 Farm tractors 1.4 Road working machines 1.4 9 Misalignment Torque Weight / Moment of inertia Dynamic torsional rigidity +60 °C dampening factor [Ψ] = 0.4 SAE SITEX® FL Flange Axial Angular Radial Nominal Max Reversible Hub [Nm/rad] (mm) (°) (mm) TKN Tkmax TKW 6-1/2” 7-1/2” 8” 10” 11-1/2” 0.25 TKN 0.50 TKN 0.75 TKN 1.00 TKN Kg 0.68 0.39 0.455 0.565 0.8 - 3 3 3 3 42 2 1° 0,2 240 600 120 33 x 10 78 x 10 110 x 10 130 x 10 2 Kgm 0.0006 0.003 0.004 0.006 0.011 - Kg 0.75 0.4 0.52 0.5 0.75 - 3 3 3 3 48 2 1° 0,2 250 620 125 33 x 10 78 x 10 110 x 10 130 x 10 2 Kgm 0.0007 0.003 0.004 0.006 0.011 - Kg 0.85 0.4 0.52 0.5 0.75 - 3 3 3 3 48 P 1 1° 0,2 310 780 155 38 x 10 88 x 10 125 x 10 148 x 10 2 Kgm 0.0007 0.003 0.004 0.006 0.011 - Kg 1.4 - 0.45 - - - 3 3 3 3 55 1 1° 0,2 500 1250 250 50 x 10 140 x 10 175 x 10 200 x 10 2 Kgm 0.0019 - 0.0035 - - - Kg 2.4 - - 0.8 0,93 1.08 3 3 3 3 65 2 1° 0,3 660 1650 330 58 x 10 142 x 10 205 x 10 250 x 10 2 Kgm 0.005 - - 0.009 0.015 0.023 Kg 2.45 - - 0.8 0.93 1.08 3 3 3 3 65 P 1 1° 0,2 800 1950 400 76 x 10 185 x 10 270 x 10 330 x 10 2 Kgm 0.005 - - 0.009 0.015 0.023 Kg 5.1 - - - - 1.13 3 3 3 3 80 2 1° 0,3 1300 3100 650 190 x 10 420 x 10 590 x 10 710 x 10 2 Kgm 0.015 - - - - 0.023

www.jbj.co.uk/couplings.html #DriveLineHarmony Assembly The versatility of the SITEX® FL couplings allows for numerous assembly options with different hub lengths giving consumers the ability to obtain the suitable dimension for every application. 1) Centre the flange on the fly-wheel in correspondence to the seat and tighten the mounting screws DIN 912 – 8.8 class in accordance with the torque values shown in the table: 2) Centre the fly-wheel cover plate in relation to the seat on the engine bellhousing. Tighten the screws. 3) Install the toothed hub onto the pump shaft. For split clamp hub, tighten in accordance with the torques shown in the table. 4) Move the pump-hub assembly through the fly-wheel cover plate and up to the stop. Tighten the screws. FLD Model Type The SITEX® FLD couplings are designed for applications which combine with engine pulleys. These couplings allow for belt replacement without pump disassembly. The operating temperature 5range is from -25 °C to 100 °C. T = Nominal Coupling torque T = Max Coupling torque T = Max reversal torque KN Kmax KW 10 Assembly ® SITEX Gear Couplings Screw Ms M 8 25 Nm M 10 86 Nm M 12 355 Nm Coupling Screw Ms 42 - 48 M 10 49 Nm 65 M 12 86 Nm 80 M 16 355 Nm T T T dmax L5 L1 L4 L6 E L H L2 D DH KN Kmax KW Size (Nm) (Nm) (Nm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) 28 FLD 45 90 23 26 4 35,5 10 28,5 13 81 39 22,5 42 70 32 FLD 60 120 30 30 4 35,5 12 28,5 13 81 40 21,5 48 84 42 FLD 140 280 70 42 5 37,5 13 30,5 13 86 43 22,5 63 100 60 FLD 380 780 190 65 5 64 16 44 16 129 60 42 95 140 80 FLD 700 1400 350 80 6 83 20 53 20 162 69 58,5 120 175 Split clamp hub fastening Lock nut & washer fastening

www.jbj.co.uk/couplings.html #DriveLineHarmony Hub Fig. Splines Type A (mm) B (mm) C (mm) G (mm) h (mm) L (mm) Screw Ms (Nm) Splines DIN5480 1 25 x 1.25 x 18 - - 37 13 - 42 - - 42 3 25 x 1.25 x 18 - - 37 13 - 42 M10 49 6 30 x 2 x 14 60 6 37 13 - 42 M10 49 2 30 x 2 x 14 60 6 45 13 - 50 - - 48 6 30 x 2 x 14 60 6 45 13 - 50 M10 49 2 35 x 2 x16 60 6 49 20 - 55 - - 6 35 x 2 x16 60 6 54 20 - 60 M12 86 65 2 40 x 2 x 18 78 6 49 20 - 55 - - 6 40 x 2 x 18 78 6 54 20 - 60 M12 86 6 45 x 2 x 21 78 6 49 20 - 55 M12 86 80 3 50 x 2 x 24 - - 49 25 - 55 M16 295 Hub Fig. Splines Type A (mm) B (mm) C (mm) G (mm) h (mm) L (mm) Screw Ms (Nm) Splines SAE J498 Teeth Dp 3 PH-S 5/8” 9 16/32 - - 37 - 13 42 M10 49 42 4 PI-S 3/4” 11 16/32 - - - - 13 42 M10 49 6 PB-S 7/8” 13 16/32 60 3 37 - 13 42 M10 49 5 PB-BS 1” 15 16/32 50 6 37 27 13 42 M10 49 48 5 PA-S 1 3/8” 21 16/32 52 7 45 45 13 50 M10 49 5 PA-S 1 3/8” 21 16/32 52 5 49 48 20 55 M12 86 65 5 PC-S 1 1/4” 14 12/24 52 5 49 44 20 55 M12 86 80 3 PE 1 3/4” 27 16/32 - - 49 25 - 55 M16 295 Screw Screw Screw Screw L C B L C B L L C L C B L C øA G G G G G G Fig.4 Clamping hub with splined bore Fig.5 Clamping hub with splined bore and circlip seating Fig.6 Clamping hub with splined bore Spline Bore Hub ® SITEX Gear Couplings 11 Ms= clamp screws tightening torque. Other splined bores and executions are available upon request. h A A Fig.1 Splined bore hub Fig.2 Splined bore hub Fig.3 Clamping hub with splined bore

www.jbj.co.uk/couplings.html #DriveLineHarmony ® SITEX FL Coupling Selection ® SITEX Gear Couplings 12 SAE dimension of the engine housing Number of rotations at nominal power (rpm) Engine max torque (Nm) Engine nominal power (kW) Motor side Driven side Number of rotations (rpm) Engine flywheel dimension Type of the pump shaft (specify splined type, diameter and length) Type of the pump flange

ensuring a continuing high quality service in which customers can have complete confidence. “ “ Driveline H jbj’s teamis recognised for its expertise in the selection and configuration of hydraulic and mechanical transmission systems. Able to draw on an that extensive product range provides the building blocks for bespoke systems both large and small, the in-house design team offers a complete service, ranging from an assessment of customer requirements to full technical backup, including product specification, CAD based system design, system build and certification. Moreover customers can take advantage of jbj’s own machine-shop facilities and skilled engineers guarantee to quality and control costs. jbj Techniques is a specialist supplier of high-quality products for the mechanical power transmission and fluid power sectors. The company offers a high level of in-house expertise plus a huge selection of products to meet a very broad range of customer applications. From specification, through technical advice and manufacture to after-sales support, jbj Techniques provides a comprehensive and valued service to the power transmission and hydraulics industries. The company fields a UK-wide team of technical sales engineers to ensure that the business is close to its customers, and it enjoys excellent associations with European manufacturers, acting as sole UK distributor in many cases. jbj Techniques provides one of the widest ranges of couplings available within the UK; mechanical power transmission couplings for a vast range of applications. Ranging from miniature couplings, all steel gear couplings, flexible spider couplings, shaft couplings, torque limiting couplings, disc and grid type couplings, ATEX compliant and shaft locking devices. Magnetic couplings for power transmission between hermetically sealed areas. However as extensive as the selection is, couplings make up a fraction of jbj’s portfolio. As power transmission specialists the company stock and provide gearboxes, clutches, pumps, hydraulic motors, flow meters, fluid power accessories including: cooling & heat exchange products, reservoirs, pipe flanges, seals and level indicators, as well as a variety of bellhousings and engine adaptors, to name just a few of the product categories. jbj Techniques Limited is proud of it’s relationship and reputation with customers and suppliers. The core client base is stable and loyal, which is testament to the quality of service provided by the company. A similar relationship exists with suppliers, ensuring a continuing high quality service in which customers can have complete confidence. Dampers Engine Adaptor Kits Hydraulic Adaptors Torque Limiting Couplings Tyre Couplings Anti-static/Flameproof Couplings Torsionally Rigid Couplings Torsionally Flexible Couplings Bellhousings Permanent Magnetic Couplings Torsional Couplings to Large Combinations Small Individual Components

Harmony comprehensive range of components www.jbj.co.uk an excellence in engineering 01737 767493 info@jbj.co.uk www.jbj.co.uk - registered in England No: 1185469 - jbj Techniques Limited is ISO certificated, committed to international coordination & unification of industrial standards. A range of products ATEX certificated to directive 94/9/E requirements Screw Pumps Pneumatic Motors & Starters Gear Pumps/Motors Axial & Radial Piston Motors Vane Pumps LSHT Motors/Geared Motors Splitter Gearboxes Planetary Gearboxes BDS Clutches BD Clutches & Gearboxes Oil Bath Clutches Flow Dividers Tanks/Accessories Fluid Level Indicators Flanges Mini Power Packs Coolers Pressure Intensifiers You Tube

registered in England No: 1185469 jbj Techniques Limited is ISO certificated, committed to international coordination & unification of industrial standards. A range of products ATEX certificated to directive 94/9/EC requirements setby JamesHarris, jbjTechniquesLimited jbj Techniques Limited 28 Trowers Way Holmethorpe Industrial Estate Redhill Surrey RH1 2LW. UNITED KINGDOM 01737 767493 info@jbj.co.uk www.jbj.co.uk quality products for mechanical & fluid power You Tube

RkJQdWJsaXNoZXIy NzQyNjQ=