SITEX® FL Couplings ® SITEX Gear Couplings ® The SITEX FL couplings are designed for optimizing the connections between reciprocating engines and driven equipment such as pumps, compressors, generators, etc. ® SITEX FL couplings consist of a steel hub and fibreglass reinforced polyamide flange which offers both mechanical strength and dimensional stability in a ® variety of temperature ranges. The special teeth allow SITEX FL couplings to compensate for small misalignments thus avoiding wear. The steel-Polyamide coupling allows maintenance free continuous operation. Approved according to ATEX Directive. Main characteristics and advantages Minimum dimensions: The entire coupling is usually installed inside an engine housing, minimizing the axial dimensions thus reducing the tools required for installation. Axial misalignments: The hub toothing can move freely axially inside the Polyamide flange avoiding axial forces which may arise on the pump shaft. Heat stability: The special fibreglass reinforced Polyamide flange is designed to operate in internal combustion engine environments without air cooling and up to 140° C. ® Maintenance free: The SITEX FL joints are maintenance and lubrication free. ® Quick assembling: Blind assembly makes installation of the SITEX FL quick and easy. Angular misalignments: The special teeth allow angular misalignment correction, protecting the bearings against angular forces. ® Stiffness: The stiffness of the SITEX FL coupling allow for torsionally vibration-free operation. ® The SITEX FL couplings are used in connections between the flywheels of the internal combustion engines and: hydro-pumps, rotating pistons, and compressor blades. www.jbj.co.uk/couplings.html #DriveLineHarmony 6
RkJQdWJsaXNoZXIy NzQyNjQ=