Standard CX Clutch CX106P, CX107P, CX108P, CX110P Series Specifications subject to change without prior notice in the interest of continual product improvement. Contact jbj Techniques Limited tel: +44 (0)1737 767493 or email: info@jbj.co.uk, your Twin Disc representative for engineering specifications. Patent pending. www.jbj.co.uk/mechanical-power-conversion.html #DriveLineHarmony Features & Benefits: » Available in sizes SAE 6.5 to SAE 11.5. » Ball type main bearing. » Creates suitable application torque capacity. » Optional sintered iron plates*. » Built in hex nut. » Suitable for in-line and side load applications. » Creates 25% higher torque capacity with sintered iron plates. » Eases adjustment verification. * Not available on the CX106 & CX107. SPECIFICATIONS – CX108P & CX110P Organic Sintered 312 (230) 387 (285) 448 (330) 556 (410) Model Number CX108P3, CX108P4, CX108P5 Weight kg (lbs) SAE Housing Max. Input Torque Nm (lb-ft) 33 (73) 3, 4, 5 CX110P1, CX110P2, CX110P3, CX110P4 1, 2, 3, 4 52 (115) Maximum Safe Speed Solid Plates Split Plates Cast Drive Ring Nodular Drive Ring Cast Drive Ring Nodular Drive Ring 3100 3100 3050 3100 3100 3930 2650 3500 Model Number CX106P4, CX106P5, CX106P6 Weight kg (lbs) SAE Housing Max. Input Torque Nm (lb-ft) 216 (159) 3500 24 (53) SPECIFICATIONS – CX106P & CX107P 4, 5, 6 CX107P4, CX107P5, CX107P6 4, 5, 6 237 (175) 3200 25 (55) Maximum Safe Speed Electric motor Up to 3 hours per day 3–10 hours per day Over 10 hours per day Multi-cylinder internal combustion engine Multi-cylinder internal combustion engine with high torque rise Single cylinder internal combustion engine 1.00 1.00 1.25 1.25 1.25 1.50 1.50 1.75 2.00 1.00 1.25 1.50 1.25 1.50 1.75 1.75 2.00 2.25 1.50 1.75 2.00 1.75 2.00 2.25 2.25 2.50 2.75 1.25 1.50 1.75 1.50 1.75 2.00 2.00 2.25 2.50 Prime Mover Duration of Service Uniform Moderate Load Heavy Load Up to 3 hours per day 3–10 hours per day Over 10 hours per day Up to 3 hours per day 3–10 hours per day Over 10 hours per day Up to 3 hours per day 3–10 hours per day Over 10 hours per day 5252 x HP Engine RPM = Torque (lb-ft) Torque x Load Factor = Application Torque (Use load factor from chart at left). To calculate application torque: 9550 x kW Engine RPM = Torque (Nm) Load Classifications based upon AGMA Load Characteristics 13
RkJQdWJsaXNoZXIy NzQyNjQ=