Long Life. Fast Response. The H series will always duplicate performance under identical operating conditions. Hysteresis clutch for industrial application. Torque is independent of slip speed and can be easily controlled by varying the current. Since there is no frictional contact between the magnets, the units have an extremely wide torque range and are ideally suited for testing machinery and/or application that are required to produce consistent and smooth torque over a wide range. The torque of H series electromagnetic hysteresis clutches/brakes is independent of slip speed. Torque is directly proportionate to coil current, thus the torque of each unit can be adjusted by varying the current. Once the current is stable, the torque remains constant. The H series produces drag torque without physical contact (friction) of parts and are not subject to wear (except the normal wear of antifriction bearings). Repeatability. SmoothOperation. The H series does not utilizemechanical friction, therefore operation is smooth at any slip speed. EasyMounting. Mounting is effortless - no adjustments tomake, no gaps to set. The H series may bemounted in the horizontal or vertical position. Brakes/Clutches HC Electromagnetic Hysteresis Clutch Model Part Static Torque Maximum Bore Volts / Watts Keyway Weight HC-0.5 25361200 0.0041 / 0.0367 3000 Shaft 10mm (in), 5mm 24 / 11 D shaft 0.45 / 1.00 HC-2.5 25091400 0.0207 / 0.183 3000 Shaft 14mm (in), 7mm 24 / 15 D shaft 1.00 / 2.20 HC-1.2 25091300 0.0103 / 0.091 3000 Shaft 12mm (in), 6mm 24 / 11 D shaft 0.68 / 1.50 HC-5 25091500 0.0415 / 0.367 3000 Shaft 16mm (in), 8mm 24 / 17 D shaft 1.68 / 3.70 Number Number Nm / in-lbs rpm kg / lbs HC-10 25091600 0.0837 / 0.741 3000 Shaft 18mm (in), 10m 24 / 21 D shaft 4.00 / 8.80 www.jbj.co.uk/electromagnetic-clutches.html 43 #DriveLineHarmony Torque Range: 0.05 to 1 Nm. 0.4 to 8.9 in-lbs.
RkJQdWJsaXNoZXIy NzQyNjQ=