| |
 |
|
|
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
SELECTION
CRITERIA |
NYLON
SLEEVE GEAR |
|
Shaft size range (mm) |
8
to
41 |
|
Torque range (Nm) |
18
to
160 |
|
Maximum angular misalignment
capability (°) |
3° to 5° |
|
Temperature range
(standard element) |
-25°
to
66°C |
|
Reactionary loads
due to misalignment |
medium |
|
Torque to O.D. capability |
fair |
|
Speed capability |
fair |
|
Torsional stiffness |
high |
|
Ease of installation
& maintenance |
excellent |
|
Chemical resistance |
good |
|
Adaptable to several
designs |
poor |
|
Damping capacity |
poor |
|
excellent, good,
fair and poor are relative ratings |
|
|
|
|

|
|
Gear
Couplings |
| |
» Single or double engagement
options suit a variety of applications.
» Continuous sleeve or
flanged connections for high power drives.
» Vari-Crown tooth form
has higher tooth strength when misaligned.
» Available for either
horizontal or vertical installations.
» Disengaging or shear
pin options on request.
» Spacer type connections
accommodate large shaft end gaps.
» Nylon sleeve options
require no lubrication. |
|
Dentex ®
torsionally rigid, power transmission couplings which transmit
torque between two steel gear hubs and the internal toothing
of a nylon drive sleeve.
The coupling
is designed to release neighbouring shaft bearings from non-controlled
additional bearing loads.Maximum shaft diameters of 100 mm can
be accommodated with maximum torques up to 2,400Nm and speeds
up to 8,000rpm.
VIEW related
products »Spidex
Couplings, Anti-static couplings, Torsional
Couplings
|
 |
|
jbj
Techniques Limited is ISO certificated,
committed to international coordination
& unification of industrial standards |
|
|
© Copyright, jbj Techniques Limited,
28 Trowers Way, Holmethorpe Industrial Estate, Redhill, Surrey
RH1 2LW. United Kingdom of Great Britain. telephone: +44(0)1737
767493 email:info@jbj.co.uk
E. & O. E., Disclaimer: Information throughout this web-site
relevant to design, materials and/or specifications are subject
to change without notice and liability therefore.
|
| |
|
|
|
|
|
|