Flender mechanical power transmission couplings available from jbj Techniques Limited

Selection of the Coupling Series / Type The coupling series is frequently determined by the drivenmachine and the design of the drivetrain. Common selection criteria are listed below and assigned to coupling properties, which are used to select the coupling series. Additionally, the price of the coupling and availability are important criteria for determining the coupling series to be used. The FLUDEX series operates positively and transmits the torque with the aid of a flowing oil or water filling. FLUDEX couplings are used to reduce starting and/or overload torques. During starting, the motor may, for example, run up within a very short time; because of the FLUDEX coupling, the drive train with the driven machine may accelerate after a delay and without increased torque load. The FLUDEX coupling cannot compensate for shaft misalignment and is therefore designed in combination with a displacement coupling, a cardan shaft or a belt drive. The displacement coupling may be selected in accordance with the criteria described below. Torque Range Rated Coupling Torque TKN Speed Range Peripheral Speed v = DA • n /19100 max max Torsionally Rigid Torsionally Flexible Highly Flexible Operating Temperature Range Coupling Type ZAPEX 850 ... 7,200,000 Nm 60 m/s ■ – – -20 ... +80 °C N-ARPEX 350 ... 2,000,000 Nm 110 m/s ■ – – -50 ... +280 °C ARPEX 92 ... 80,000 Nm 100 m/s ■ – – -40 ... +280 °C N-EUPEX 19 ... 85,000 Nm 36 m/s – ■ – -50 ... +100 °C N-EUPEX DS 19 ... 21,200 Nm 36 m/s – ■ – -30 ... +80 °C RUPEX 200 ... 1,300,000 Nm 60 m/s – ■ – -50 ... +100 °C N-BIPEX 12 ... 4,650 Nm 45 m/s – ■ – -50 ... +100 °C ELPEX-B 24 ... 14,500 Nm 35 m/s – – ■ -50 ... +70 °C ELPEX-S 330 ... 63,000 Nm 66 m/s – – ■ -40 ... +120 °C ELPEX 1600 ... 90,000 Nm 60 m/s – – ■ -40 ... +80 °C Total mounting length Driven shaft useable length. Driver shaft useable length. Driver shaft diameter & keyway size. DRIVER DRIVEN Type of driver. Driver power. Driver rpm. Shaft separation or DBSE (distance between shaft ends) Driven shaft diameter & keyway size. Type of driven. Coupling Type Selection Mechanical Power Transmission Couplings www.jbj.co.uk/couplings.html#flender 13 #DriveLineHarmony

RkJQdWJsaXNoZXIy NzQyNjQ=