www.jbj.co.uk/couplings.html#flender 307 61750 3750 90 198 390 260 150 307 17 56 182 220 91 1.1 2LC0330-8AY 115 of inertia 2 Nm rpm min. max. min. max. kgm kg 1) Size Rated Max Dimensions Mass Part Number. Weight Keyway ND2 NL2 107 2210 7700 0 65 152 87 50 107 7 15 59 68 34 0.01 2LC0330-1AY 6.7 130 4020 6900 0 82 178 108 62 129.5 16 31 79 85 42 0.021 2LC0330-2AY 10.5 torque speed (mm) moment DIN 6885-1 83 1020 8500 0 50 117 67 43 83 6 21 55 52 31 0.003 2LC0330-0AY 3.3 156 6600 6200 0 100 213 130 76 156 11 29 93 110 47 0.05 2LC0330-3AY 18 181 11000 5800 0 116 240 153 90 181 11 33 109 130 58 0.095 2LC0330-4AY 26.5 211 19200 5100 0 137 280 180 105 211 14 40 128 150 67 0.22 2LC0330-5AY 44 250 30680 4500 0 164 318 214 120 249.5 12 42 144 175 72 0.4 2LC0330-6AY 62 274 43550 4000 80 178 347 233 135 274 16 50 164 190 81 0.64 2LC0330-7AY 82 T n D1, D2 DA ND1/ NL1/ D4 S VA Q P J /J Type m KN Kmax 1 2 364 117000 3400 120 242 457 312 190 364 17 84 236 265 126 2.4 2LC0331-1AY 185 424 162500 3200 150 288 527 371 220 423.5 23 76 263 300 140 4.9 2LC0331-2AY 285 333 87100 3550 100 216 425.5 283 175 332.5 17 70 214 250 104 1.8 2LC0331-0AY 155 ZNZA Series Torsionally Rigid Gear Couplings VA VA1 S17 S17 LZ VA1 P P ØND1 ØD4 ØDA ØD1 ØQ NL1 NL2 S A A A A ØD4 ØD2 ØQ ØND2 Part G_MD10_EN_00063a 1 Part 2 » VAvalid at Smax. With finished bore. With finished bore. » » ØD1 Without finished bore. ØD2 Without finished bore. P Length required for renewing the sealing rings, aligning the coupling parts and tightening the set screw. Notes Configurable variants1) » Weights apply to the entire coupling withmaximumbores. » Mass moments of inertia apply to a coupling half with maximum bore diameter. » Q Diameter required for renewing the sealing rings. 29 #DriveLineHarmony » Part 1: Bore 40H7mm, keyway to DIN 6885-1 P9 and set screw. Ordering example Ordering code: 2LC0330-0AY99-0AA0-Z L0W+M1A+M13 » ZAPEX ZNN coupling for axial displacement, size 107, S min. = 7 mm, Smax. = 15mm » Part 2: Bore 45K7mm, keyway to DIN 6885-1 P9 and set screw. 1) To identify complete item numbers specifying the available finish boring options and further order options, please contact jbj Techniques Ltd. technical office, telephone: +44 (0)1737 767493 or email: info@jbj.co.uk
RkJQdWJsaXNoZXIy NzQyNjQ=