SCREW PUMPS Screw Pumps 2SP LS Series Technical Specifications 19 Non lubricating low and medium viscosity and corrosive fluids Suitable for water, light chemical and petrochemical products, fuel and heavy oils. Admissible delivery pressure (continuous) 10 bar at 1000 to 3600 rpm. Installation Data Installation Indoor or Outdoor. Environment Marine, Industrial. Application Cargo, transfer, lube system, stripping. Operating Data Handled fluid Fuel oil HFO - DO - LSMGO hydraulic and Lube oils. Viscosity range From 0.7 to 15.000 cSt Pump speed From 750 to 3600 rpm. * Rotation (viewed from coupling end) CW (Std version; CCW on demand). Technical Characteristics 3 Flow rate Up to 10,000 LPM - 600 m /h. Suction pressure From - 0,5 to 10 bar. Delivery pressure Up to 40 bar. Operating temperature range * From 0 to 300 °C Seal Mechanical seal. Bearing type Radial ball on main shaft. Bearing lubrication Dependent on application. Mounting arrangement Horizontal or vertical (with foot). Inlet & Outlet connection DIN standard (ANSI on request). Materials Casing/Flanges or carbon steel. GGG-40 Screws Nitrided steel * O-rings Viton ® Surface protection On request. *Contact jbj Techniques technical office for different values, telephone: +44 (0)1737 767493 or email: info@jbj.co.uk www.jbj.co.uk/screwpumps.html #DriveLineHarmony
RkJQdWJsaXNoZXIy NzQyNjQ=