SCREW PUMPS Screw Pumps 2SP LS Series Specifications 38 Non lubricating low and medium viscosity and corrosive fluids Suitable for water, light chemical and petrochemical products, fuel and heavy oils. Maximum allowable delivery pressure (continuous) 10 bar at 1000 to 3600 rpm. Installation Data Installation: Indoor or Outdoor. Environment: Marine, Industrial. Application: Cargo, transfer, lube system, stripping. Operating Data Handled fluid: Mineral and synthetic lubricating oils in a wide range of viscosities. Hydraulic oils, diathermic oils. Fluids having no or low lubricating properties. Food, cosmetics and detergents. HFO, LFO, LSMGO & IFO fuels having . Viscosity range: 1.0 to 15000 cSt Pump speed: From 750 to 3600 rpm. * Rotation (viewed from coupling end): CW (Std version; CCW on demand). Technical Characteristics 3 Flow rate: Up to 10,000 LPM - 600 m /h. Suction pressure: From - 0,5 to 10 bar. Delivery pressure: Up to 40 bar. Operating temperature range: * From 0 to 300 °C Shaft seal: Mechanical seal. Shaft bearing: Radial ball on main shaft. Bearing lubrication: Dependent on application. Mounting arrangement: Horizontal or vertical (with foot). Inlet & Outlet connection: DIN UNI EN1092-1, ANSI 150 B16.5 Materials Casing/Flanges: or carbon steel / stainless steel. GGG-40 Screws: Nitrided steel / stainless steel. O-rings: Viton ® Surface protection: On request. www.jbj.co.uk/screwpumps.html #DriveLineHarmony
RkJQdWJsaXNoZXIy NzQyNjQ=