29 #DriveLineHarmony (1) Harmonised nominal value referring to preferred number R40. Actual transmissible torque may vary depending on ratio, speed and application. (2) Harmonised nominal value referring to preferred numbers R40. For actual ratios see Annex C. (3) Thermal power limit. For actual figures based on speed, temperature and duty see section B4, specifications, paragraph 8. (4) Mean value at rated conditions. For actual figures based on speed, service life and application/duty see section B4, specifications, paragraph 6. (5) Restrictions may apply for hollow shaft for shrink disc, see section G, output accessories. Customer to verify the rating shaft is capable of loads actually transmitted. (6) Mean values at rated conditions. For actual admissible loads based on speed, service life and application/duty see section B4, specifications, paragraph 9. (7) Maximum peak values which must never be exceeded. Combined thrust and radial shaft loads might reduce bearing life. Contact jbj Techniques technical office, telephone 01737 767483, email: info@jbj.co.uk for accurate life calculation of specific application. (8) Combination of high torque and heavy radial shaft load might require verification of the output shaft. If the following condition is not fulfilled contact jbj Techniques technical office, telephone 01737 767483, email: info@jbj.co.uk for accurate verification of your specific application: Radial load (applied) Torque (applied) x < 0.5 Radial load (admissible) Torque (nominal) www.jbj.co.uk/planetary-gearboxes.html Planetary Gearboxes Series PSR 1700 - 2500 Actual Torque (4) Rating (Nm) (5) Peak Torque (1) Torque Rating (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (A) (A) 160 400 (A) (A) 200 420 (A) (A) 220 480 (A) (A) 250 530 (A) (B) 280 560 (A) (B) 300 670 (A) (A) 320 750 340 (A) 850 (B) 360 (A) 950 (B) (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (A) (B) 50 * 85 * (A) (A) 56 * 90 * (A) (A) 63 * * 105 67 (A)* 120 (B)* 75 (B)* 140 (B)* 80 (A)* 160 (C)* (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) 1500/2000 rpm 900/1200rpm 900/1200rpm n nom./max. 1 148/750 kW 148/750 kW 102/650 kW (3) P th. /max. 260000 Nm 220000 Nm 170000 Nm 3000/4000 rpm 2250/3000 rpm 2250/3000 rpm 73/230 kW 73/230 kW 56.5/115 kW n nom./max. 1 (3) P th. /max. 3000/4000 rpm 2800/3800 rpm 2800/3800 rpm n nom./max. 1 69/106 kW 69/90 kW 54/74 kW (3) P th. /max. (A) 330000 (B) 280000 (A) 275000 (B) 230000 (A) 220000 (B) 185000 (C) 160000 430000 Nm 365000 Nm 310000 Nm PSR 2600 PSR 2200 PSR 1700 Model R3 R4 R5 (A) (A) 160 400 (A) (A) 200 420 (A) (A) 220 480 (A) (A) 250 530 (A) (B) 280 560 (A) (B) 300 670 (A) (A) 320 750 340 (A) 850 (B) 360 (A) 950 (B) (A) (A) 190 * 450 * (A) (A) 220 * 530 * (A) (B) 250 * 600 * (B) (B) 280 * 670 * (A) (A) 300 * * 750 (A) (B) 340 * 800 * (B) (B) 380 950 * * (A) (C) 400 1100 * * Bearing capacity, solid shafts 6) and 8) Admissible radial load (kN) 1200 Distance from shaft shoulder (mm) 300 1100 1000 900 800 700 600 200 0 100 -100 -200 1200 1100 1000 900 800 700 600 *(on request) *(on request) 710 (A) 1700 3200 (A) (A) (A) (A) (B) 800 1800 3600 950 (B) 1900 (B) (A) 3900 1000 2000 4200 (A) (A) (B) 1100 2200 4400 (A) (B) (A) 1300 2400 5000 (A) (A) (B) (B) (B) (B) 1400 2600 5600 (A) (A) (B) 1500 2800 6500 * (B) (B) (C) 1600 3000 7500 * *(on request) 850 (A) 1700 3200 (A) (A) (A) (A) (A) 950 1800 3600 1000 1900 3800 (A) (A) (A) 1100 2000 4000 (A) (A) (A) (A) (A) (A) 1200 2200 4300 1300 2400 4500 (A) (A) (A) (A) (A) (A) 1400 2600 5100 (A) (A) (B) 1500 2800 5800 * (A) (A) (B) 1600 3000 6500 * 850 (A) 1700 3200 (A) (A) (A) (A) (A) 950 1800 3600 1000 1900 3800 (A) (A) (A) 1100 2000 4000 (A) (A) (A) (A) (A) (A) 1200 2200 4300 1300 2400 4500 (A) (A) (A) (A) (A) (A) 1400 2600 5100 (A) (A) (B) 1500 2800 5800 * (A) (A) (B) 1600 3000 6500 *
RkJQdWJsaXNoZXIy NzQyNjQ=