27 #DriveLineHarmony (1) Harmonised nominal value referring to preferred number R40. Actual transmissible torque may vary depending on ratio, speed and application. (2) Harmonised nominal value referring to preferred numbers R40. For actual ratios see Annex C. (3) Thermal power limit. For actual figures based on speed, temperature and duty see section B4, specifications, paragraph 8. (4) Mean value at rated conditions. For actual figures based on speed, service life and application/duty see section B4, specifications, paragraph 6. (5) Restrictions may apply for hollow shaft for shrink disc, see section G, output accessories. Customer to verify the rating shaft is capable of loads actually transmitted. (6) Mean values at rated conditions. For actual admissible loads based on speed, service life and application/duty see section B4, specifications, paragraph 9. (7) Maximum peak values which must never be exceeded. Combined thrust and radial shaft loads might reduce bearing life. Contact jbj Techniques technical office, telephone 01737 767483, email: info@jbj.co.uk for accurate life calculation of specific application. (8) Combination of high torque and heavy radial shaft load might require verification of the output shaft. If the following condition is not fulfilled contact jbj Techniques technical office, telephone 01737 767483, email: info@jbj.co.uk for accurate verification of your specific application: Radial load (applied) Torque (applied) x < 0.5 Radial load (admissible) Torque (nominal) www.jbj.co.uk/planetary-gearboxes.html Planetary Gearboxes Series PSR 1700 - 2500 Actual Torque (4) Rating (Nm) (5) Peak Torque (1) Torque Rating (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (A) (A) 53 110 (A) (A) 63 120 (A) (A) 71 130 (A) (A) 80 150 (A) (B) 90 170 (A) (B) 100 190 (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (A) (B) 17 * 24 * (A) (B) 19 * 28 * (A) (C) 22 * * 32 (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (2) Ratio (Act. rating) (2) Ratio (Act. rating) (2) Ratio (Act. rating) (2) Nom. ratio (Act. rating) 180 (A) 400 850 (A) (B) 200 (A) 450 (A) 950 (A) (A) (A) (A) 210 500 1050 240 (A) 560 (A) (B) 1200 (A) (A) (B) 280 630 1300 (A) (A) 320 710 (A) (A) 360 800 (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) 750/1000 rpm 750/1000 rpm 750/1000 rpm n nom./max. 1 244/1900 kW 244/1800 kW 229/1500 kW (3) P th. /max. 1500/2000 rpm 900/1200rpm 900/1200rpm n nom./max. 1 148/750 kW 148/750 kW 102/650 kW (3) P th. /max. 260000 Nm 220000 Nm 170000 Nm 1800/2500 rpm 1800/2500 rpm 1800/2500 rpm 69/410 kW 69/410 kW 63/320 kW n nom./max. 1 (3) P th. /max. 2800/3800 rpm 2800/3800 rpm 2800/3800 rpm n nom./max. 1 60/128 kW 60/128 kW 53/128 kW (3) P th. /max. (A) 330000 (B) 280000 (A) 275000 (B) 230000 (A) 220000 (B) 185000 (C) 160000 430000 Nm 365000 Nm 310000 Nm PSR 2600 PSR 2200 PSR 1700 Model L1 L2 L3 L4 (A) (A) 53 110 (A) (A) 63 120 (A) (A) 71 130 (A) (A) 80 150 (A) (B) 90 170 (A) (B) 100 190 (A) (B) 63 * 120 * (A) (A) 71 * 140 * (B) (B) 80 * 150 * (A) (A) 85 * 160 * (B) (B) 90 * * 170 (A) (B) 95 190 * * 110 (A)* (A) (B) 4.2 5.3 (A) (B) 14 18 (A) (A) 17 22 28 (B) Bearing capacity, solid shafts 6) and 8) Admissible radial load (kN) 1200 Distance from shaft shoulder (mm) 300 1100 1000 900 800 700 600 200 0 100 -100 -200 1200 1100 1000 900 800 700 600 (A) (B) 4.2 5.3 *(on request) *(on request) (A) (A) (A) 210450 750 (A) (A) (B) 240 480 800 (A) (A) (B) 260530 900 (A) (A) (B) 300 560 1000 (A) (A) (B) 320 600 1200 (A) (A) (B) 360 670 1300 * (A) (A) (C) 400 710 1600 * 4.2 (A) 5.3 6.2 * (B) (C) *(on request) *(on request) (A) (B) 14 18 (A) (A) 17 22 28 (B) *(on request) 180 (A) 400 850 (A) (B) (A) (A) (A) 200 450 950 (A) (A) (A) 210 500 1050 240 (A) 560 (A) (B) 1200 (A) (A) (B) 280 630 1300 (A) (A) 320 710 (A) (A) 360 800 *(on request)
RkJQdWJsaXNoZXIy NzQyNjQ=