23 #DriveLineHarmony (1) Harmonised nominal value referring to preferred number R40. Actual transmissible torque may vary depending on ratio, speed and application. (2) Harmonised nominal value referring to preferred numbers R40. For actual ratios see Annex C. (3) Thermal power limit. For actual figures based on speed, temperature and duty see section B4, specifications, paragraph 8. (4) Mean value at rated conditions. For actual figures based on speed, service life and application/duty see section B4, specifications, paragraph 6. (5) Restrictions may apply for hollow shaft for shrink disc, see section G, output accessories. Customer to verify the rating shaft is capable of loads actually transmitted. (6) Mean values at rated conditions. For actual admissible loads based on speed, service life and application/duty see section B4, specifications, paragraph 9. (7) Maximum peak values which must never be exceeded. Combined thrust and radial shaft loads might reduce bearing life. Contact jbj Techniques technical office, telephone 01737 767483, email: info@jbj.co.uk for accurate life calculation of specific application. (8) Combination of high torque and heavy radial shaft load might require verification of the output shaft. If the following condition is not fulfilled contact jbj Techniques technical office, telephone 01737 767483, email: info@jbj.co.uk for accurate verification of your specific application: Radial load (applied) Torque (applied) x < 0.5 Radial load (admissible) Torque (nominal) www.jbj.co.uk/planetary-gearboxes.html Planetary Gearboxes Series PSR 670 - 1300 Actual Torque (4) Rating (Nm) (5) Peak Torque (1) Torque Rating (2) Nom. ratio (Act. rating) (B) (A) 48 130 (A) (A) 56 140 (B) (A) 63 160 (A) (A) 80 170 (A) (A) 95 200 (A) (B) 105 220 (A) (B) 120 250 (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (B) (A) 42 * 120 (B) (A) 48 140 (A) (A) 56 170 (B) (A) 67 200 (A) (B) 80 220 (A) (B) 90 220 105 (A) (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (B) (A) 13 28 (A) (B) 15 32 (B) (B) 17 36 21 (A) 25 (A) (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) 4.0 * 4.5 5.3 (B) (A) (B) (2) Ratio (Act. rating) (2) Ratio (Act. rating) (2) Ratio (Act. rating) (2) Ratio (Act. rating) (2) Nom. ratio (Act. rating) (A) (A) (A) 220 600 1200 (A) (A) (A) 260 670 1400 (A) (A) (B) 300 710 1500 (A) (A) (B) 340 800 1700 (A) (A) 400 850 (A) (A) 450 900 (A) (A) 480 1000 (A) (A) 530 1100 (2) Nom. ratio (Act. rating) 220 (A) 600 1200 (A) (A) (A) (A) (A) 260 670 1400 (A) (A) (B) 300 710 1500 (A) (A) (B) 340 800 1700 (A) (A) 400 850 (A) (A) 450 900 (A) (A) 480 1000 (A) (A) 530 1100 (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) 1200/1700 rpm 900/1200 rpm 800/1000 rpm 750/1000 rpm n nom./max. 1 137/950 kW 137/900 kW 111/750 kW 60/650 kW (3) P th. /max. 1800/2500 rpm 1800/2500 rpm 1500/2000rpm 1500/2000rpm n nom./max. 1 50.3/580 kW 50.3/580 kW 44.1/410 kW 35.5/320 kW (3) P th. /max. 130000 Nm 110000 Nm 80000 Nm 67000 Nm 2800/3800 rpm 2000/3000 rpm 2000/3000 rpm 2000/3000 rpm 42.7/240 kW 42.7/240 kW 39.1/190 kW 29.5/128 kW n nom./max. 1 (3) P th. /max. 2800/3800 rpm 2800/3800 rpm 2800/3800 rpm 2800/3800 rpm n nom./max. 1 35.9/64 kW 35.9/60 kW 32.9/60 kW 25.2/60 kW (3) P th. /max. (A) 167000 (B) 141000 (A) 135000 (B) 114000 (A) 100000 (B) 85000 (A) 78000 (B) 71000 (C) 68000 215000 Nm 190000 Nm 150000 Nm 105000 Nm PSR 1300 PSR 1100 PSR 800 PSR 670 Model L1 L2 L3 L4 (A) (A) (B) 250 670 1300 (A) (A) (B) 300 710 1500 (A) (A) 340 800 (A) (A) 400 850 (A) (A) 450 900 (A) (A) 480 1000 (A) (A) 530 1050 (A) (A) 600 1200 (B) (A) 42 * 120 (B) (A) 48 140 (A) (A) 56 170 (B) (A) 67 200 (A) (B) 80 220 (A) (B) 90 220 105 (A) Bearing capacity, solid shafts 6) and 8) Admissible radial load (kN) 700 600 500 400 300 200 800 700 600 500 400 300 200 800 Distance from shaft shoulder (mm) 0 -100 -200 100 200 300 (B) (A) 50 * 130 56 (A) 140 (A) (A) (A) 63 160 (A) (A) 75 180 (A) (A) 85 190 (A) (A) 100 220 (A) (C) 120 250 * (A) (A) 240 710 (A) (A) 280 800 (A) (A) 320 900 (A) (A) 360 1000 (A) (A) 420 1100 (A) (A) 480 1250 (A) (A) 530 1500 (A) (C) 600 1700 * (B) (A) (B) 3.4 4.1 5.3 (B) (A) (B) 3.4 4.1 5.3 (B) (A) (B) 3.4 4.1 5.3 (B) (A) 13 28 (A) (B) 15 30 (B) (B) 17 36 21 (A) 25 (A) (B) (A) 13 28 (A) (B) 15 30 (B) (B) 17 36 21 (A) 24 (A) *(on request) *(on request) (B) (B) 15 * 28 * (A) (A) 17 * 32 * (B) (C) 20 * * 36 22 (A)* 26 (A)*
RkJQdWJsaXNoZXIy NzQyNjQ=