Admissible radial load (kN) 21 #DriveLineHarmony 700 (1) Harmonised nominal value referring to preferred number R40. Actual transmissible torque may vary depending on ratio, speed and application. (2) Harmonised nominal value referring to preferred numbers R40. For actual ratios see Annex C. (3) Thermal power limit. For actual figures based on speed, temperature and duty see section B4, specifications, paragraph 8. (4) Mean value at rated conditions. For actual figures based on speed, service life and application/duty see section B4, specifications, paragraph 6. (5) Restrictions may apply for hollow shaft for shrink disc, see section G, output accessories. Customer to verify the rating shaft is capable of loads actually transmitted. (6) Mean values at rated conditions. For actual admissible loads based on speed, service life and application/duty see section B4, specifications, paragraph 9. (7) Maximum peak values which must never be exceeded. Combined thrust and radial shaft loads might reduce bearing life. Contact jbj Techniques technical office, telephone 01737 767483, email: info@jbj.co.uk for accurate life calculation of specific application. (8) Combination of high torque and heavy radial shaft load might require verification of the output shaft. If the following condition is not fulfilled contact jbj Techniques technical office, telephone 01737 767483, email: info@jbj.co.uk for accurate verification of your specific application: Radial load (applied) Torque (applied) x < 0.5 Radial load (admissible) Torque (nominal) www.jbj.co.uk/planetary-gearboxes.html 600 500 400 300 200 100 Distance from shaft shoulder (mm) 300 200 0 100 -100 -120 700 600 500 400 300 200 100 Planetary Gearboxes Series PSR 300 - 560 Actual Torque (4) Rating (Nm) (5) Peak Torque (1) Torque Rating (2) Nom. ratio (Act. rating) 50 (A) 67 (A) 80 (A) 95 (A) 105 (A) 130 (A) 150 (A) 170 (B) (2) Nom. ratio (Act. rating) (A) (A) 38 110 (A) (A) 50 125 (A) (A) 60 150 67 (A) 71 (A) 80 (A) 95 (A) 105 (A) (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) 50 (A) 67 (A) 80 (A) 95 (A) 105 (A) 125 (A) 150 (A) 170 (B) (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) 13 (A) 16 (B) 21 (A) 25 (B) (2) Nom. ratio (Act. rating) 12 (A) 14 (A) 18 (A) 21 (A) (2) Nom. ratio (Act. rating) 16 (B) 25 (B) 28 (C) 34 (D) (2) Nom. ratio (Act. rating) 16 (B) (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (A) (A) 160 710 (A) (A) 190 800 (A) (A) 220 900 (A) (A) 260 1000 300 (A) 340 (A) 360 (A) 400 (A) 450 (A) 500 (A) 560 (A) 630 (A) (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) (A) (A) 170 670 (A) (B) 190 710 (A) (A) 220 750 (A) (A) 250 850 (A) (A) 300 900 (A) (A) 340 1000 (A) (B) 360 1050 420 (A) 1200 (B) 480 (A) 530 (A) 560 (A) 630 (A) (2) Nom. ratio (Act. rating) 2250/3000 rpm 2250/3000 rpm 2250/3000 rpm 2250/3000 rpm 2250/3000 rpm n nom./max. 1 51.8/230 kW 51.8/230 kW 50.4/230 kW 50.4/230 kW 50.4/230 kW (3) P th. /max. 56000 Nm 48000 Nm 42000 Nm 36000 Nm 30000 Nm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 2250/3000 rpm 44.6/220 kW 32.5/115 kW 31.1/115 kW 31.1/115 kW 31.1/115 kW n nom./max. 1 (3) P th. /max. 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm n nom./max. 1 27.1/68 kW 26.7/65 kW 25.7/61 kW 25.4/539 kW 24.8/47 kW (3) P th. /max. (A) 65000 (B) 58000 (A) 56000 (B) 51000 (C) 47000 (D) 42500 (A) 51000 (A) 44000 (B) 39000 (A) 37000 (B) 33000 (C) 28000 75000 Nm 65000 Nm 58000 Nm 52000 Nm 45000 Nm PSR 560 PSR 480 PSR 420 PSR 360 PSR 300 Model R2 R3 R4 (A) (B) 12 25 (B) (B) 1 30 6 (A) (C) 18 34 21 (C) (A) (B) 42 140 (A) (B) 60 150 (A) (B) 67 170 (B) (B) 71 210 (A) (C) 80 240 90 (A) 105 (A) 125 (A) 50 (A) 60 (A) 71 (A) 80 (A) 90 (A) 110 (A) 170 (C) 210 (D) (A) (A) 140 560 (B) (A) 160 630 (A) (A) 200 710 (A) (A) 220 800 (A) (A) 250 900 (A) (B) 260 1000 300 (A) 1050 (B) (A) (B) 340 1200 (A) (B) 360 1250 (A) (B) 400 1400 (A) (C) 450 1600 500 (A) (A) (A) 170 710 (A) (A) 200 800 (A) (A) 220 900 (A) (B) 250 1050 280 (A) 320 (A) 360 (A) 400 (A) 450 (A) 500 (A) 560 (A) 630 (A) (A) (B) 190 1050 (A) (C) 220 1200 (A) (D) 260 1400 300 (A) 340 (A) 360 (A) 400 (A) 450 (A) 500 (A) 560 (A) 670 (A) 800 (A) Bearing capacity, solid shafts 6) and 8)
RkJQdWJsaXNoZXIy NzQyNjQ=