Planetary Gearboxes Series PSR 75 - 130 Distance from shaft shoulder (mm) Admissible radial load (kN) Bearing capacity, solid shafts 6) and 8) (1) Harmonised nominal value referring to preferred number R40. Actual transmissible torque may vary depending on ratio, speed and application. (2) Harmonised nominal value referring to preferred numbers R40. For actual ratios see Annex C. (3) Thermal power limit. For actual figures based on speed, temperature and duty see section B4, specifications, paragraph 8. (4) Mean value at rated conditions. For actual figures based on speed, service life and application/duty see section B4, specifications, paragraph 6. (5) Restrictions may apply for hollow shaft for shrink disc, see section G, output accessories. Customer to verify the rating shaft is capable of loads actually transmitted. (6) Mean values at rated conditions. For actual admissible loads based on speed, service life and application/duty see section B4, specifications, paragraph 9. (7) Maximum peak values which must never be exceeded. Combined thrust and radial shaft loads might reduce bearing life. Contact jbj Techniques technical office, telephone 01737 767483, email: info@jbj.co.uk for accurate life calculation of specific application. (8) Combination of high torque and heavy radial shaft load might require verification of the output shaft. If the following condition is not fulfilled contact jbj Techniques technical office, telephone 01737 767483, email: info@jbj.co.uk for accurate verification of your specific application: Radial load (applied) Torque (applied) x < 0.5 Radial load (admissible) Torque (nominal) 280 300 280 300 20 40 60 80 100 120 140 160 180 200 220 240 260 20 -160 -120 -80 -40 0 40 80 120 160 200 240 280 40 60 80 100 120 140 160 180 200 220 240 260 Actual Torque (4) Rating (Nm) (5) Peak Torque (1) Torque Rating 42 120 300 (A) (A) (B) 48 130 340 (A) (A) (C) 53 (A) 160 (A) 63 (A) 180 (A) 71 (A) 210 (B) 85 (A) 240 (B) 100 260 (A) (B) (2) Nom. ratio (Act. rating) (A) (A) 48 130 (A) (A) 53 150 (A) (A) 60 160 (A) (A) 71 180 (A) (A) 85 210 (A) (B) 100 240 110 (A) (2) Nom. ratio (Act. rating) (A) (A) 42 110 (A) (A) 48 120 (A) (A) 53 130 (A) (A) 60 150 (A) (A) 71 160 (A) (A) 85 180 100 (A) (2) Nom. ratio (Act. rating) 48 130 300 (A) (A) (C) 53 150 340 (A) (A) (D) 63 (A) 160 (A) 71 (A) 180 (A) 80 (A) 210 (B) 95 (A) 240 (B) 110 280 (A) (C) (2) Nom. ratio (Act. rating) (A) (A) 53 150 (A) (A) 60 170 (B) (A) 71 180 (A) (A) 80 210 (A) (B) 95 240 110 (A) 130 (A) (2) Nom. ratio (Act. rating) 11 22 42 (B) (A) (B) 12 26 48 (A) (A) (C) 14 (A) 30 (B) 16 (B) 35 (B) 19 (A) 38 (B) (2) Nom. ratio (Act. rating) (B) (A) 11 22 (B) (A) 12 26 (A) (A) 14 30 (A) (B) 16 35 19 (B) (2) Nom. ratio (Act. rating) (A) (A) 12 26 (A) (A) 14 30 16 (A) 19 (A) 22 (A) (2) Nom. ratio (Act. rating) 12 30 (A) (A) 14 36 (A) (A) 16 42 (A) (A) 19 (A) 22 (A) (2) Nom. ratio (Act. rating) (A) (B) 16 36 19 (B) 22 (A) 25 (A) 30 (A) (2) Nom. ratio (Act. rating) 3.3 5.0 6.9 (B) (B) (C) 3.8 (A) 6.1 (B) (2) Ratio (Act. rating) 3.3 4.3 5.1 (B) (A) (B) (2) Ratio (Act. rating) (A) (A) 3.7 4.4 (2) Ratio (Act. rating) (A) (C) 3.7 5.8 (B) (D) 5.0 6.9 (2) Ratio (Act. rating) (A) (B) 4.3 5.1 (2) Ratio (Act. rating) (A) (A) (A) 200 500 1250 (A) (A) (B) 240 600 1500 (A) (A) (B) 260 670 1700 (A) (A) (B) 280 710 1800 (A) (A) (B) 320 800 2000 (A) (A) (C) 360 900 2300 (A) (A) 400 1000 (A) (A) 450 1100 (2) Nom. ratio (Act. rating) (A) (A) (B) 220 750 1700 (A) (A) 280 850 (A) (A) 320 950 (A) (A) 380 1050 (A) (A) 420 1100 (A) (A) 500 1250 (A) (A) 560 1400 (A) (B) 670 1500 (2) Nom. ratio (Act. rating) (A) (A) 220 670 (A) (A) 260 710 (A) (A) 300 800 (A) (A) 360 900 (A) (A) 420 1050 (A) (A) 480 1250 (A) (A) 560 1400 600 (A) (2) Nom. ratio (Act. rating) (A) (A) (B) 180 600 1500 (A) (A) (C) 220 670 1700 (A) (A) (D) 260 710 2000 (A) (A) 300 800 (A) (A) 360 900 (A) (B) 420 1050 (A) (B) 480 1200 (A) (B) 560 1300 (2) Nom. ratio (Act. rating) (2) Nom. ratio (Act. rating) 2800/3800 rpm 2500/3300 rpm 2500/3500 rpm 2000/3000 rpm 2000/3000 rpm n nom./max. 1 28.3/205 kW 28.3/190 kW 27.3/136 kW 27.3/136 kW 27.3/128 kW (3) P th. /max. 2800/3800 rpm 2800/3800 rpm 2800/3800 rpm 2800/3800 rpm 2800/3800 rpm n nom./max. 1 19.3/103kW 18.9/64kW 18.3/60kW 18.3/60kW 18.3/60kW (3) P th. /max. 13000 Nm 11000 Nm 10000 Nm 8500 Nm 7500 Nm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 12.8/26 kW 12.5/26 kW 12/26 kW 12/26 kW 12/26 kW n nom./max. 1 (3) P th. /max. 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm 3000/4000 rpm n nom./max. 1 11.2/15.3 kW 10.9/15.1 kW 10.3/15 kW 10.3/14.7 kW 10.3/13.1 kW (3) P th. /max. (A) 15000 (B) 13000 (A) 13000 (B) 11700 (C) 10800 (D) 9900 (A) 12000 (A) 10400 (B) 9400 (A) 8700 (B) 7800 (C) 6600 16000 Nm 15000 Nm 13500 Nm 12000 Nm 10500 Nm PSR 130 PSR 110 PSR 100 PSR 85 PSR 75 Model L1 L2 L3 L4 (A) (A) (A) 220 670 1400 (B) (A) (B) 260 750 1500 (A) (A) (B) 300 850 1700 (A) (A) 360 900 (A) (A) 420 950 (A) (A) 480 1050 (A) (A) 560 1200 (A) (A) 600 1300 11 www.jbj.co.uk/planetary-gearboxes.html #DriveLineHarmony
RkJQdWJsaXNoZXIy NzQyNjQ=