PIPE FLANGES 09 08
01737 767493 info@jbj.co.uk www.jbj.co.uk quality products for mechanical & fluid power - registered in England No: 1185469 - jbj Techniques Limited is ISO certificated, committed to international coordination & unification of industrial standards. A range of products ATEX certificated to directive 94/9/E requirements an excellence in engineering www.jbj.co.uk/ .html portflanges SAE standard 3,000 and 6,000 series flanges for screw or weld connection. Available for straight connection, fixed or swivel elbow with solid or split clamps allowing great flexibility of system design. CETOP, DIN and ISO flanges for large flows and high pressures up to 400 bar complete the range. Manufactured in ASTM 105 or AISI 316L. jbj Techniques produce an innovative range of pipe flanges for fluid systems. Designed for pressures up to 450 bar, flow rates up to 20,000 l.p.m. and pipe sizes between 20 and 220 mm outside diameter. They are specifically aimed at the steel, oil, gas and food industries where ease of maintenance features are particularly, economically attractive. The ease of maintenance feature involves the ability to remove the seal, which is supported within a special retaining element, and replace it without fully disconnecting or moving the mating flange or runs of pipework as is typically the case with the standard DIN and CETOP flanges found in heavy pipework systems.
Pipe Flanges Contents quality products for mechanical & luid power The details of all the following products are reproduced to the correct details at time of print ............................................................................. E & OE Page Technical Information ....................................................................................................................................................................... 1 - 2 A.S.A. Schedule Pipe Sizes ............................................................................................................................................................ 3 SAE Split Flange Halves ................................................................................................................................................................. 4 - 5 SAE Flange Clamp .......................................................................................................................................................................... 6 SAE Flange Clamp with Tapped Holes - metric ............................................................................................................................... 7 SAE BSP Threaded Flange ............................................................................................................................................................. 8 - 9 SAE NPT Threaded Flange ............................................................................................................................................................. 10 SAE Socket Weld Flange ................................................................................................................................................................ 11 SAE Butt welded Flange .................................................................................................................................................................. 12 SAE Weld on Flange ....................................................................................................................................................................... 13 SAE Butt Weld to - Metric Pipes ND 40 ........................................................................................................................................... 14 - 15 SAE - UN - Threaded Flange .......................................................................................................................................................... 16 SAE - BSP Threaded 90° Elbow ..................................................................................................................................................... 17 - 18 SAE - Socket Weld 90° Elbow ......................................................................................................................................................... 19 - 20 SAE - Socket Weld 90° Elbow for Metric Pipes ............................................................................................................................... 21 - 22 SAE - Pipe Threaded Companion Flange ....................................................................................................................................... 23 SAE - NPT Threaded Flange Companion ....................................................................................................................................... 24 SAE - Socket Weld Flange Companion ........................................................................................................................................... 25 SAE - Butt Weld Companion Flange ............................................................................................................................................... 26 - 28 SAE - Closing Flange ...................................................................................................................................................................... 29 SAE - Socket Weld Flange 500 P.S.I. .............................................................................................................................................. 30 SAE - Closed Flange Companion .................................................................................................................................................... 31 SAE - Socket Weld Companion Flange 500 P.S.I. .......................................................................................................................... 32 SAE - Socket Weld Flange 500 P.S.aI. ............................................................................................................................................ 33 SAE - JIC Threaded Flange ............................................................................................................................................................ 34 SAE - Metric Threaded Flange DIN 3901/3902 ............................................................................................................................... 35 SAE - Locking Sheet ....................................................................................................................................................................... 36 SAE - Adaptor Sheet ....................................................................................................................................................................... 37 SAE - Adaptor Flange with Test-point .............................................................................................................................................. 38 SAE - Flange Plug ........................................................................................................................................................................... 39 SAE - Flange Head .......................................................................................................................................................................... 40 SAE - Socket Weld Coupling Flange ............................................................................................................................................... 41 SAE - Weld on Coupling .................................................................................................................................................................. 42 Butt Weld Coupling Loose Head Flange ......................................................................................................................................... 43 - 45 Butt Weld Loose Head Flange ......................................................................................................................................................... 46 - 48 Butt Weld Nipple Adaptor ................................................................................................................................................................ 49 SAE (male) BSPP Adaptors ............................................................................................................................................................ 50 SAE (female) Socket Weld Adaptors ............................................................................................................................................... 51 SAE BSPP Female Adaptors ........................................................................................................................................................... 52 SAE - Metric Threaded Flange DIN 3901/3902 ............................................................................................................................... 53 - 54 continuedoverleaf
Pipe Flanges Contents quality products for mechanical & luid power Page SAE - 90° Swept Elbow to DIN 3901/3902 ...................................................................................................................................... 55 SAE - 90° Compact Elbow - metric to DIN 3901/3902 .................................................................................................................... 56 SAE - Flange Adaptor 90° - metric to DIN 3901/3902 ..................................................................................................................... 57 SAE - 90° Compact Elbow JIC Male ............................................................................................................................................... 58 - 59 SAE - Weld on Flange Adaptor 90° - for metric pipes ..................................................................................................................... 60 - 61 SAE - 90° Swept Elbow ................................................................................................................................................................... 62 SAE - T Connection ......................................................................................................................................................................... 63 SAE Adaptor - Brazing ..................................................................................................................................................................... 64 SAE - Flare Flange .......................................................................................................................................................................... 65 SAE - Flare Flange Coupling ........................................................................................................................................................... 66 SAE - Straight Adaptor Flange ........................................................................................................................................................ 67 SAE - 90° L - Block .......................................................................................................................................................................... 68 SAE - 90° L - Reduction .................................................................................................................................................................. 69 SAE - 90° T - Block .......................................................................................................................................................................... 70 SAE - T - Block Companion ............................................................................................................................................................. 71 Flange Connection DIN 3901/3902 ................................................................................................................................................. 72 Flange Connection 90° DIN 3901/3902 ........................................................................................................................................... 73 - 74 90° Compact Elbow - Steel ............................................................................................................................................................. 75 90° Compact Elbow - Aluminium ..................................................................................................................................................... 76 90° Compact Elbows ....................................................................................................................................................................... 77 90° Compact Elbow - Aluminium ..................................................................................................................................................... 78 Flange Connection - Straight ........................................................................................................................................................... 79 Square Flange ND 160 bar .............................................................................................................................................................. 80 Square Flange ND 250 bar .............................................................................................................................................................. 81 Square Flange ND 315 bar .............................................................................................................................................................. 82 Square Flange ND 400 bar .............................................................................................................................................................. 83 90° Weld - on Flange ....................................................................................................................................................................... 84 T - Connection ................................................................................................................................................................................. 85 Cetop - Square Flange .................................................................................................................................................................... 86 - 87 Cetop 90° - Butt Weld Flange .......................................................................................................................................................... 88 New Replaceable Seal System ....................................................................................................................................................... 89 - 95
Pipe Flanges Technical Information Hochdruckfl nsche Manufacturing Standards Our flanges are manufactured in accordance with the following standards: SAE Flanges................................................... SAE J 518 C, ISO 6162 Cetop Flanges ................................................ CETOP RP 63H 4 Bolt Square Flanges.................................... ISO/DIS 6164 Pressure Ratings For maximum flange pressure ratings, please refer to the tables below and the specific flange catalogue page. Please note that the quoted pressure ratings are for a working temperature range of between -20°C to +90°C. For use outside of this temperature range please consult the jbj Techniques technical department. Standard Pressure: Series 3000 psi High Pressure: Series 6000 psi Materials For available flange material please refer to relevant page. If several materials are shown, the choice of material used is at the discretion of the manufacturer. Corrosion Protection Unless otherwise stated on the product range all flanges are delivered in natural condition and coated with a rust inhibitor. Flange Kits All flange kits are supplied with relevant bolts and seals, as indicated on corresponding page. Used Bolts SAE flanges ............metric bolts: DIN 912-8.8 (ISO 4762-8.8) or DIN 912-10.9 (ISO 4762-10.9)∗ ............ UNC bolts: ASA B 18.3 Gear pump flanges ............metric bolts: DIN 912-8.8 (ISO 4762-8.8) 4-bolt square flanges ............metric bolts: DIN 931/934-8.8 (ISO4014/4017-8.8) or DIN 931/934-10.9 (ISO 4014/4017-10.9)∗ Cetop flanges ............metric bolts: DIN 931/934-8.8 (ISO 4014/4017-8.8 or DIN 931-934-10.9 (ISO 4014/4017-10.9)∗ ∗ The system pressure is determined by the wall thickness and the quality of the tube used. 1 Size Maximum Working Pressure PSI BAR 3/ 8" 6000 420 3/ 4" 6000 420 1" 6000 420 11/ 4" 6000 420 11/ 2" 6000 420 2" 6000 420 21/ 2" 6000 420 3" 6000 420 Size Maximum Working Pressure PSI BAR 1/ 2" 5000 340 3/ 4" 5000 340 1" 5000 340 11/ 4" 4000 275 11/ 2" 3000 200 2" 3000 200 21/ 2" 2500 175 3" 2000 135 31/ 2" 510 35 4" 510 35
Pipe Flanges Technical Information Hochdruckfl nsche Flange Tube Connections We suggest that where applicable tubing to the following standards should be utilised Seamless precision steel tube to DIN2391, material grade C, ST 37-4 or ST 52-4. Seamless boiler tube to DIN 2441 groups 1 & 2, material grade ST 37-4 or ST 52-4. Tubing according to ASA B36-10. We suggest the use of tubing to the following dimensions: Size Tubes to DIN 2391 Tubes to DIN 2448 Tubes to ASA B 36-10 Series Series Series 100bar 160bar 250bar 315bar 400bar 250bar 400bar Schedule 250 Schedule 400 1/ 2" 15 x 1 18 x 1 18 x 1.5 16 x 2.0 20 x 2.5 16 x 2.5 20 x 3 16 x 3 20 x 3.5 21.3 x 2.6 21.3 x 3.2 40 21.3 x 2.8 80 21.3 x 3.7 3/ 4" - - 25 x 3 25 x 3.5 25 x 4 26.9 x 2.6 26.9 x 4 40 26.7 x 2.9 80 26.7 x 3.9 1" 28 x 2 - 28 x 3 30 x 4 30 x 5 30 x 6 33.7 x 4 33.7 x 6.3 40 33.7 x 4.8 160 33.7 x 6.4 11/ 4" 35 x 2 - 35 x 4 38 x 5 38 x 6 38 x 7 42.4 x 5 42.4 x 6.3 80 42.4 x 4.8 160 42.4 x 6.4 11/ 2" 42 x 3 - 42 x 5 50 x 6 50 x 8 50 x 9 48.3 x 5 48.3 x 8 80 48.3 x 5.1 160 48.3 x 7.1 2" - - - 65 x 8 65 x 10 60.3 x 6.3 60.3 x 10 160 60.3 x 8.7 200 60.3 x 11.1 21/ 2" - - - 80 x 10 80 x 12.5 76.1 x 8 76.1 x 12.5 160 73 x 9.5 200 73 x 14 3" - - - - - 88.9 x 10 88.9 x 16 160 88.9 x 11.1 200 88.9 x 15.2 31/ 2" - - - - - 101.6 x 10 101.6 x 16 - - - - 4" - - - - - 114.3 x 12.5 114.3 x 20 160 114.3 x 13.5 200 114.3 x 17.1 2 Size A B 3/ 8" 17.12 2.62 1/ 2" 18.66 3.53 3/ 4" 25.00 3.53 1" 32.92 3.53 11/ 4" 37.70 3.53 11/ 2" 47.22 3.53 2" 56.75 3.53 21/ 2" 69.45 3.53 3" 85.32 3.53 31/ 2" 98.02 3.53 4" 110.72 3.53 5" 136.12 3.53 Seal Material The standard o-ring seal material is Buna (90 shore). However Viton (85 - 90 shore) is available as an option on request. For all SAE flanges and Cetop flanges the o-ring dimensions are according to the following table - O-Rings for use with SAE Flanges
Pipe Flanges A.S.A. Schedule Pipe Sizes Hochdruckfl nsche 3 A.S.A. Schedule Pipe Sizes. Nominal Wall Thickness in mm Nominal Bore O.D.mm Schedule 10 20 30 STD& 40S 40 60 XS&80S 80 100 120 140 160 XXS 1/2" 10.3 1.73 1.73 2.41 2.41 1/4" 13.7 2.24 2.24 3.02 3.02 3/8" 17.1 2.31 2.31 3.20 3.20 1/2" 21.3 2.77 2.77 3.73 3.73 4.78 7.47 3/4" 26.7 2.87 2.87 3.91 3.91 5.56 7.82 1" 33.4 3.38 3.38 4.55 4.55 6.35 9.09 11/4" 42.2 3.56 3.56 4.85 4.85 6.35 9.07 11/2" 48.3 3.68 3.68 5.08 5.08 7.14 10.16 2" 60.3 3.91 3.91 5.54 5.54 8.74 11.07 21/2" 73.0 5.16 5.16 7.01 7.01 9.52 14.02 3" 88.9 5.49 5.49 7.62 7.62 11.13 15.24 31/2" 101.6 5.74 5.74 8.08 8.08 4" 114.3 6.02 6.02 8.56 8.58 11.13 13.49 17.12 5" 141.3 6.55 6.55 9.52 9.52 12.70 15.88 19.05 6" 168.3 7.11 7.11 10.97 10.97 14.27 18.26 21.95 8" 219.1 6.35 7.04 8.18 8.18 10.31 12.70 12.70 15.09 18.26 20.62 23.01 22.22 10" 273.0 6.35 7.80 9.27 9.27 12.70 12.70 15.09 18.26 21.44 25.40 28.58 25.40 12" 323.9 6.35 8.38 9.52 10.31 14.27 12.70 17.47 21.44 25.40 28.58 33.34 25.40 14" 355.6 6.35 7.92 9.52 9.52 11.13 15.09 12.70 19.05 23.82 27.79 31.75 35.71 16" 406.4 6.35 7.92 9.52 9.52 12.70 16.64 12.70 21.44 26.19 30.96 36.52 40.49 18" 457.2 6.35 7.92 11.13 9.52 14.27 19.05 12.70 23.82 29.36 34.92 39.69 45.24 20" 508.0 6.35 9.52 12.70 9.52 15.09 20.62 12.70 26.19 32.54 38.10 44.45 50.01 22" 558.8 6.35 9.52 12.70 9.52 15.88 22.22 12.70 28.58 34.92 41.28 47.62 53.98 24" 609.6 6.35 9.52 14.27 9.52 17.48 24.61 12.70 30.96 38.89 46.02 52.39 59.54 26" 660.4 7.92 12.70 9.52 12.70 28" 711.2 7.92 12.70 15.88 9.52 12.70 30" 762.8 7.92 12.70 15.88 9.52 12.70 32" 812.8 7.92 12.70 15.88 9.52 17.48 12.70 34" 863.6 7.92 12.70 15.88 9.52 17.48 12.70 36" 914.4 7.92 12.70 15.88 9.52 19.05 12.70
Pipe Flanges SAE - Split Flange Halves Hochdruckfl nsche 3.000 Series Size Type A B C D E F G H J ØL Screws Weight kg. Metric UNC 1/2" FH3001 30.96 24.26 38.10 54 8.74 22.8 19 13 6.22 8.50 M8 x 25 5/16" x 11/4" 0.07 3/4" FH3002 38.89 32.13 47.63 65 11.13 25.9 22 14 6.22 10.50 M10 x 30 3/8" x 11/4" 0.09 1" FH3003 45.24 38.48 52.37 70 13.08 29.2 24 16 7.49 10.50 M10 x 30 3/8" x 11/4" 0.11 11/4" FH3004 51.59 43.69 58.72 79 15.09 36.3 22 16 7.49 12.00 M10 x 35 7/16" x 11/2" 0.15 11/4" FH3014 51.59 43.69 58.72 79 15.09 36.3 22 16 7.49 10.50 M10 x 35 - 0.15 11/4" FH3044 51.59 43.69 58.72 79 15.09 36.3 22 16 7.49 12.50 M12 x 35 - 0.15 11/2" FH3005 61.09 50.80 69.85 94 17.86 41.1 25 16 7.49 13.50 M12 x 35 1/2" x 11/2" 0.23 2" FH3006 72.24 62.74 77.77 102 21.44 48.2 26 16 9.02 13.50 M12 x 35 1/2" x 11/2" 0.25 21/2" FH3007 84.94 74.93 88.90 114 25.40 54.1 38 19 9.02 13.50 M12 x 40 1/2" x 11/2" 0.37 3" FH3008 102.39 90.93 106.38 135 30.96 65.3 41 22 9.02 16.75 M16 x 45 5/8" x 2" 0.65 31/2" FH3009 115.10 102.36 120.65 152 34.92 69.5 28 22 10.72 17.00 M16 x 45 5/8" x 2" 0.75 4" FH3010 127.79 115.06 130.18 162 38.88 76.0 35 25 10.72 17.00 M16 x 50 5/8" x 2" 0.84 5" FH3011 153.19 140.46 152.40 184 46.04 90.0 41 28 10.72 17.00 M16 x 50 5/8" x 2" 1.25 6.000 Series 1/2" FH6001 32.54 24.64 40.49 56 9.12 23.6 22 16 7.24 8.50 M8 x 30 5/16" x 11/4" 0.08 3/4" FH6002 42.06 32.51 50.80 71 11.91 30.0 28 19 8.26 10.50 M10 x 35 3/8" x 11/2" 0.18 1" FH6003 48.41 38.86 57.17 81 13.89 34.8 33 24 9.02 12.50 M12 x 45 - 0.27 1" FH6013 48.41 38.86 57.15 81 13.89 34.8 33 24 9.02 12.00 - 7/16" x 13/4" 0.27 11/4" FH6004 54.76 44.45 66.68 95 15.88 38.6 38 27 9.78 14.50 M14 x 50 - 0.40 11/4" FH6044 54.76 44.45 66.68 95 15.88 38.6 38 27 9.78 13.50 - 1/2" x 13/4" 0.40 11/2" FH6005 64.29 51.56 79.38 113 18.26 47.5 43 30 12.07 16.75 M16 x 55 5/8" x 2" 0.68 2" FH6006 80.16 67.56 96.82 133 22.23 56.9 52 37 12.07 21.00 M20 x 65 3/4" x 21/2" 1.05 4 Material: 1 ST 52.3 (FE 510) ......................Zinc Plated Yellow Chromate 2. 1.4404/1.4541 316L/321 .........Stainless Steel ordering code: ST 52.3 1.4404/1.4541 flange only FH... FHx... flange with meteric bolts FH.../M FHx.../M flange with UNC bolts FH.../U FHx.../U ∗supplied without o-ring
Pipe Flanges SAE - Split Flange Halves - Flat Hochdruckfl nsche 3.000 Series Size Type A B C D E F H J ØL Screws Weight kg. Metric UNC 1/2" HF3001 30.96 24.26 38.10 54 8.74 22.8 13 6.22 8.50 M8 x 25 5/16" x 11/4" 0.06 3/4" HF3002 38.89 32.13 47.63 65 11.13 25.9 14 6.22 10.50 M10 x 30 3/8" x 11/4" 0.07 1" HF3003 45.24 38.48 52.37 70 13.08 29.2 16 7.49 10.50 M10 x 30 3/8" x 11/4" 0.10 11/4" HF3004 51.59 43.69 58.72 79 15.09 36.6 16 7.49 11 M10 x 35 - 0.15 11/2" HF3005 61.09 50.80 69.85 94 17.86 41.1 16 7.49 13 M12 x 35 1/2" x 11/2" 0.18 2" HF3006 72.24 62.74 77.77 102 21.44 48.2 16 9.02 13 M12 x 35 1/2" x 11/2" 0.22 6.000 Series 1/2" HF6001 32.54 24.64 40.49 56 9.12 23.60 16 7.24 9.00 M8 x 30 5/16" x 11/4" 0.08 3/4" HF6002 42.06 32.51 50.80 71 11.91 30.00 20 8.26 11.00 M10 x 35 3/8" x 11/2" 0.16 1" HF6003 48.41 38.86 57.15 81 13.89 34.80 25 9.02 13.00 M12 x 45 7/16" x 13/4" 0.25 11/4" HF6004 54.76 44.45 66.68 95 15.88 38.60 27 9.78 15.00 M14 x 45 1/2" x 13/4" 0.34 11/2" HF6005 64.29 51.56 79.38 113 18.26 47.50 30 12.07 17.00 M16 x 50 5/8" x 2" 0.55 2" HF6006 80.16 67.56 96.82 133 22.23 56.90 37 12.07 21.00 M20 x 65 3/4" x 21/2" 1.02 21/2" HF6007 108.90 90.00 123.80 180 29.40 75.08 45 20.50 26.00 M24 x 75 - 2.05 3" HF6008 132.50 115.00 152.40 215 35.80 99.08 55 25.50 32.00 M30 x 90 - 4.30 5 Material: C 60 Zinc Plated Yellow Chromate ordering code: flange only HF...
Pipe Flanges SAE - Flange Clamp Hochdruckfl nsche 6 Material: 1 ST 52.3 (FE 510) ............................Zinc Plated Yellow Chromate 2. 1.4404/1.4541 316L/320................Stainless Steel ordering code: ST 52.3 1.4404/1.4541 flange with metric threads VF... VFx... flange with metric bolts VF.../M VFx.../M flange with UNC bolts VF.../U VFx.../U ∗supplied without o-ring 3.000 Series Size Type A B C D E F G H J ØL Screws Weight kg Metric UNC 1/2" VF3001 30.96 24.26 38.10 54 17.48 45.6 19 13 6.22 8.50 M8 x 25 5/16" x 11/4" 0.15 3/4" VF3002 38.89 32.13 47.63 65 22.23 51.8 22 14 6.22 10.50 M10 x 30 3/8" x 11/4" 0.17 1" VF3003 45.24 38.48 52.37 70 26.19 58.4 24 16 7.49 10.50 M10 x 35 3/8" x 11/4" 0.22 1" VF 3003-6000 psi 45.24 38.48 52.37 71 26.19 60.0 26 26 7.49 10.50 M10 x 45 - 0.43 11/4" VF3004 51.59 43.69 58.72 79 30.18 72.6 22 16 7.49 12.00 M10 x 35 7/16" x 11/2" 0.30 11/4" VF 3004-6000 psi 51.59 43.69 58.72 80 30.18 73.0 33 24 7.49 13.00 M12 x 45 - 0.64 11/2" VF3005 61.09 50.80 69.85 94 35.71 82.2 25 16 7.49 13.50 M12 x 35 1/2" x 11/2" 0.45 11/2" VF 3005-6000 psi 61.09 50.80 69.85 95 35.71 83.0 37 27 7.49 13.50 M12 x 50 - 0.96 2" VF3006 72.24 62.74 77.77 102 42.88 96.4 26 16 9.02 13.50 M12 x 35 1/2" x 11/2" 0.50 2" VF 3006-6000 psi 72.24 62.74 77.77 103 42.88 97.0 43 30 9.02 13.50 M12 x 50 - 1.38 21/2" VF3007 84.94 74.93 88.90 114 50.80 108.2 38 19 9.02 13.50 M12 x 35 1/2" x 11/2" 0.74 21/2" VF 3007-6000 psi 84.94 74.93 88.90 114 50.80 108.2 49 30 9.02 15.00 M14 x 50 - 1.75 3" VF3008 102.39 90.93 106.38 135 61.93 130.6 41 22 9.02 16.75 M16 x 50 5/8" x 2" 1.30 31/2" VF3009 115.10 102.36 120.65 152 69.85 139.0 28 22 10.72 17.00 M16 x 50 5/8" x 2" 1.50 4" VF3010 127.79 115.06 130.18 162 77.77 152.0 35 25 10.72 17.00 M16 x 50 5/8" x 2" 1.65 5" VF3011 153.19 140.46 152.40 184 92.08 180.0 41 28 10.72 17.00 M16 x 50 5/8" x 2" 2.50 6.000 Series 1/2" VF6001 32.54 24.64 40.49 56 18.24 47.20 22 16 7.24 8.50 M8 x 30 5/16" x 11/4" 0.16 3/4" VF6002 42.06 32.51 50.80 71 23.80 60.00 28 19 8.26 10.50 M10 x 35 3/8" x 11/2" 0.35 1" VF6003 48.41 38.86 57.15 81 27.76 69.90 33 24 9.02 12.50 M12 x 45 - 0.53 1" VF6003-12 48.41 38.86 57.15 81 27.76 69.90 33 24 9.02 12.00 - 7/16" x 13/4" 0.53 11/4" VF6004 54.76 44.45 66.68 95 31.75 77.20 38 27 9.78 14.50 M14 x 50 1/2" x 13/4" 0.80 11/2" VF6005 64.29 51.56 79.38 113 36.50 95.00 43 30 12.07 16.75 M16 x 55 5/8" x 2" 1.35 2" VF6006 80.16 67.56 96.82 133 44.45 113.80 52 37 12.07 21.00 M20 x 65 3/4" x 21/2" 2.10 21/2" VF6007 108.90 90.00 123.80 180 58.80 150.20 45 45 20.50 26.00 M24 x 75 - 4.10 3" VF6008 132.50 115.00 152.40 215 71.60 198.16 55 55 25.50 31.00 M30 x 90 - 8.60
Pipe Flanges SAE - Flange Clamp with Tapped Holes, Metric Hochdruckfl nsche 7 Material: 1 ST 52.3 (FE 510) ............................Zinc Plated Yellow Chromate 2. 1.4404, 316L..................................Stainless Steel ordering code: ST 52.3 1.4404 flange with metric threads VFG... VFG-x... Note: Stainless steel flanges are supplied with zinc plated bolts where necessary. 3.000 Series Size Type A B C D E F G H J M Weight kg 1/2" VFG3001 30.96 24.26 38.10 54 17.48 45.6 19 13 6.22 M8 0.15 3/4" VFG3002 38.89 32.13 47.63 65 22.23 51.8 22 14 6.22 M10 0.17 1" VFG3003 45.24 38.48 52.37 70 26.19 58.4 24 16 7.49 M10 0.22 11/4" VFG3004 51.59 43.69 58.72 79 30.18 72.6 22 16 7.49 M10 0.30 11/2" VFG3005 61.09 50.80 69.85 94 35.71 82.2 25 16 7.49 M12 0.45 2" VFG3006 72.24 62.74 77.77 102 42.88 96.4 26 16 9.02 M12 0.50 21/2" VFG3007 84.94 74.93 88.90 114 50.80 108.2 38 19 9.02 M12 0.74 3" VFG3008 102.39 90.93 106.38 135 61.93 130.6 41 22 9.02 M16 1.30 31/2" VFG3009 115.10 102.36 120.65 152 69.85 139.0 28 22 10.72 M16 1.50 4" VFG3010 127.79 115.06 130.18 162 77.77 152.0 35 25 10.72 M16 1.65 5" VFG3011 153.19 140.46 152.40 184 92.08 180.0 41 28 10.72 M16 2.50 6.000 Series 1/2" VFG6001 32.54 24.64 40.49 56 18.24 47.20 22 16 7.24 M8 0.16 3/4" VFG6002 42.06 32.51 50.80 71 23.80 60.00 28 19 8.26 M10 0.35 1" VFG6003 48.41 38.86 57.15 81 27.76 69.90 33 24 9.02 M12 0.53 11/4" VFG6004 54.76 44.45 66.68 95 31.75 77.20 38 27 9.78 M14 0.80 11/2" VFG6005 64.29 51.56 79.38 113 36.50 95.00 43 30 12.07 M16 1.35 2" VFG6006 80.16 67.56 96.82 133 44.45 113.80 52 37 12.07 M20 2.10 21/2" VFG6007 108.90 90.00 123.80 180 58.80 190.20 45 45 20.50 M24 4.10 3" VFG6008 132.50 115.00 152.40 215 71.50 198.16 55 55 25.50 M30 8.60
Pipe Flanges SAE - BSP Threaded Flange Hochdruckfl nsche 8 Material: 1 ST 44.3 (FE 430) ............................Carbon Steel 2. 1.4404 316L ..................................Stainless Steel ordering code: ST 44.3 1.4404 flange only AFS...G AFx...G flange including metric screws and o-ring AFS...GM AFx...GM flange including unc screws and o-ring AFS...GU AFx...GU Note: Stainless steel flanges are supplied with zinc plated bolts where necessary. 3000 Series Size Type A B C D E F G H J ØL M(Screws) Weight kg Metric UNC 1/2" AFS080G R1/2" 13 38.10 54 17.48 46 36 16 19 9.0 M8 x 30 5/16" x 11/4" 0.25 1/2" AFS 080 G-038 R3/8" 13 38.10 54 17.48 46 36 16 19 9.0 M8 x 30 5/16" x 11/4" 0.28 3/4" AFS100G R3/4" 19 47.63 65 22.23 50 36 18 19 11.0 M10 x 35 3/8" x 11/2" 0.39 3/4" AFS 100 G-012 R1/2" 13 47.63 65 22.23 50 36 18 19 11.0 M10 x 35 3/8" x 11/2" 0.42 1" AFS102G R1" 25 52.37 70 26.19 55 38 18 22 11.0 M10 x 35 3/8" x 11/2" 0.46 1" AFS 102 G-034 R3/4" 19 52.37 70 26.19 55 35 21 19 11.0 M10 x 35 3/8" x 11/2" 0.49 1" AFS 102 G-012 R1/2" 13 52.37 70 26.16 55 38 18 22 11.0 M10 x 35 3/8" x 11/2" 0.52 11/4" AFS104G R11/4" 32 58.72 79 30.18 68 41 21 22 11.5 M10 x 40 7/16" x 11/2" 0.66 11/4" AFS104G R11/4" 32 58.72 79 30.18 68 41 21 22 13.0 M12 x 40 - 0.66 11/4" AFS 104 G-100 R1" 25 58.72 81 30.18 65 42 25 22 11.5 M10 x 40 7/16" x 13/4" 0.75 11/4" AFS 104 G-100 R1" 25 58.72 81 30.18 65 42 25 22 13.0 M12 x 40 - 0.75 11/4" AFS 104 G-034 R3/4" 19 58.72 79 30.18 68 41 21 22 11.5 M10 x 40 7/16" x 11/2" 0.79 11/2" AFS106G R11/2" 38 69.85 93 35.71 78 45 25 24 13.5 M12 x 45 1/2" x 13/4" 1.05 11/2" AFS 106 G-114 R11/4" 32 69.85 95 35.71 78 45 27 24 13.5 M12 x 45 1/2" x 13/4" 1.10 11/2" AFS 106 G-100 R1" 25 69.85 93 35.71 78 45 25 24 13.5 M12 x 45 1/2" x 13/4" 1.16 11/2" AFS 106 G-034 R3/4" 19 69.85 93 35.71 78 45 25 24 13.5 M12 x 45 1/2" x 13/4" 1.23 2" AFS108G R2" 51 77.77 102 42.88 90 45 25 30 13.5 M12 x 45 1/2" x 13/4" 1.19 2" AFS 108 G-112 R11/2" 38 77.77 102 42.88 90 45 25 26 13.5 M12 x 45 1/2" x 13/4" 1.25 2" AFS 108 G-114 R11/4" 32 77.77 102 42.88 90 45 25 24 13.5 M12 x 45 1/2" x 13/4" 1.40 2" AFS 108 G-100 R1" 25 77.77 102 42.88 90 45 25 26 13.5 M12 x 45 1/2" x 13/4" 1.44 21/2" AFS110G R21/2" 63 88.90 114 50.80 105 50 25 30 13.5 M12 x 45 1/2" x 13/4" 1.40 21/2" AFS 110 G-200 R2" 51 88.90 114 50.80 105 50 25 30 13.5 M12 x 45 1/2" x 13/4" 1.45 3" AFS112G R3" 73 106.38 134 61.93 124 50 27 34 17.5 M16 x 50 5/8" x 2" 2.15 3" AFS 112 G-212 R21/2" 63 106.38 134 61.93 124 50 27 30 17.5 M16 x 50 5/8" x 2" 2.25 31/2" AFS114G R31/2" 89 120.65 152 69.85 136 48 27 34 17.5 M16 x 50 5/8" x 2" 2.40 31/2" AFS 114 G-300 R3" 73 120.65 152 69.85 136 48 27 34 17.5 M16 x 50 5/8" x 2" 2.50 4" AFS116G R4" 99 130.18 162 77.77 146 48 27 34 17.5 M16 x 50 5/8" x 2" 2.85 4" AFS 116 G-312 R31/2" 89 130.18 162 77.77 146 48 27 34 17.5 M16 x 50 5/8" x 2" 3.00
Pipe Flanges SAE - BSP Threaded Flange Hochdruckfl nsche 9 Material: 1 ST 44.3 (FE 430)............................Carbon Steel 2. 1.4404, 316L..................................Stainless Steel ordering code: ST 44.3 1.4404 ∗ 13.5 for UNC screws flange only AFS...G AFx...G flange including metric screws and o-ring AFS...GM AFx...GM flange including UNC screws and o-ring AFS...GU AFx...GU 6.000 Series Size Type A B C D E F G H J ØL M(Screws) Weight kg Metric UNC 1/2" AFS 401 G-012 R1/2" 13 40.49 54 18.24 46 36 16 19 9 M8 x 30 5/16"x11/4" 0.26 1/2" AFS 401 G-038 R3/8" 13 40.49 54 18.24 46 36 16 19 9 M8 x 30 5/16"x11/4" 0.29 3/4" AFS402G R3/4" 19 50.80 71 23.80 55 35 21 22 11 M10 x 35 3/8"x11/2" 0.50 3/4" AFS 402 G-012 R1/2" 13 50.80 71 23.80 55 35 21 22 11 M10 x 35 3/8"x11/2" 0.55 1" AFS403G R1" 25 57.15 81 27.76 65 42 25 24 13 M12 x 45 7/16"x13/4" 0.76 1" AFS 403 G-034 R3/4" 19 57.15 81 27.76 65 42 25 24 13 M12 x 45 7/16"x13/4" 0.80 11/4" AFS404G R11/4" 32 66.68 95 31.75 78 45 27 25 ∗ 15 M14 x 45 1/2"x13/4" 1.20 11/4" AFS 404 G-100 R1" 25 66.68 95 31.75 78 45 27 25 ∗ 15 M14 x 45 1/2"x13/4" 1.30 11/2" AFS405G R11/2" 38 79.38 112 36.50 94 50 30 28 17 M16 x 50 5/8"x2" 1.65 11/2" AFS 405 G-114 R11/4" 32 79.38 112 36.50 94 50 30 28 17 M16 x 50 5/8"x2" 1.75 2" AFS406G R2" 51 96.82 134 44.45 114 65 37 30 21 M20 x 65 3/4"x21/2" 2.45 2" AFS 406 G-112 R11/2" 38 96.82 134 44.45 114 65 37 30 21 M20 x 65 3/4"x21/2" 2.55
Pipe Flanges SAE - NPT Threaded Flange Hochdruckfl nsche 10 Material: 1 ST 44.3 (FE 430)............................Carbon Steel 2. 1.4404, 316L..................................Stainless Steel ordering code: ST 44.3 1.4404 ∗ 13.5 for UNC screws flange only AFS...N AFx...N flange with metric screws and o-ring AFS...NM AFx...NM flange with UNC screws and o-ring GFS...NU GFx...NU 3.000 Series Size Type A B C D E F G H J ØL M(Screws) Weight kg Metric UNC 1/2" AFS080N 1/2" NPT 13 38.10 54 17.48 46 36 16 19 9.0 M8 x 30 5/16"x 11/4" 0.25 1/2" AFS 080 N-038 3/8" NPT 13 38.10 54 17.48 46 36 16 19 9.0 M8 x 30 5/16"x 11/4" 0.28 3/4" AFS100N 3/4" NPT 19 47.63 65 22.23 50 36 18 19 11.0 M10 x 35 3/8"x 11/2" 0.39 3/4" AFS 100 N-012 1/2" NPT 13 47.63 65 22.23 50 36 18 19 11.0 M10 x 35 3/8"x 11/2" 0.42 1" AFS102N 1" NPT 25 52.37 70 26.19 55 38 18 22 11.0 M10 x 35 3/8"x 11/2" 0.46 1" AFS 102 N-034 3/4" NPT 19 52.37 70 26.19 55 35 21 19 11.0 M10 x 35 3/8"x 11/2" 0.49 11/4" AFS104N 11/4" NPT 32 58.72 79 30.18 68 41 21 22 11.5 M10 x 40 7/16"x 11/2" 0.66 11/4" AFS 104 N-100 1" NPT 25 58.72 81 30.18 65 42 25 22 11.5 M10 x 40 7/16"x 11/2" 0.75 11/2" AFS106N 11/2" NPT 38 69.85 93 35.71 78 45 25 24 13.5 M12 x 45 1/2"x 13/4" 1.05 11/2" AFS 106 N-114 11/4" NPT 32 69.85 95 35.71 78 45 27 24 13.5 M12 x 45 1/2"x 13/4" 1.10 2" AFS108N 2" NPT 51 77.77 102 42.88 90 45 25 30 13.5 M12 x 45 1/2"x 13/4" 1.19 2" AFS 108 N-112 11/2" NPT 38 77.77 102 42.88 90 45 25 26 13.5 M12 x 45 1/2"x 13/4" 1.25 21/2" AFS110N 21/2" NPT 63 88.90 114 50.80 105 50 25 30 13.5 M12 x 45 1/2"x 13/4" 1.40 3" AFS112N 3" NPT 73 106.38 134 61.93 124 50 27 34 17.5 M16 x 50 5/8"x 2" 2.15 31/2" AFS114N 31/2" NPT 89 120.65 152 69.85 136 48 27 34 17.5 M16 x 50 5/8"x 2" 2.40 4" AFS116N 4" NPT 99 130.18 162 77.77 146 48 27 34 17.5 M16 x 50 5/8"x 2" 2.85 6.000 Series 1/2" AFS 401 N-012 1/2" NPT 13 40.49 54 18.24 46 36 16 19 9 M8 x 30 5/16"x 11/4" 0.26 1/2" AFS 401 N-038 3/8" NPT 13 40.49 54 18.24 46 36 16 19 9 M8 x 30 5/16"x 11/4" 0.29 3/4" AFS402N 3/4" NPT 19 50.80 71 23.80 55 35 21 22 11 M10 x 35 3/8"x 11/2" 0.50 3/4" AFS 402 N-012 1/2" NPT 13 50.80 71 23.80 55 35 21 22 11 M10 x 35 3/8"x 11/2" 0.55 1" AFS403N 1" NPT 25 57.15 81 27.76 65 42 25 24 13 M12 x 45 7/16"x 13/4" 0.76 1" AFS 403 N-034 3/4" NPT 19 57.15 81 27.76 65 42 25 24 13 M12 x 45 7/16"x 13/4" 0.80 11/4" AFS404N 11/4" NPT 32 66.68 95 31.75 78 45 27 25 ∗ 15 M14 x 45 1/2"x 13/4" 1.20 11/4" AFS 404 N-100 1" NPT 25 66.68 95 31.75 78 45 27 25 ∗ 15 M14 x 45 1/2"x 13/4" 1.30 11/2" AFS405N 11/2" NPT 38 79.38 112 36.50 94 50 30 28 17 M16 x 50 5/8"x 2" 1.65 11/2" AFS 405 N-114 11/4" NPT 32 79.38 112 36.50 94 50 30 28 17 M16 x 50 5/8"x 2" 1.75 2" AFS406N 2" NPT 51 96.82 134 44.45 114 65 37 30 21 M20 x 65 3/4"x 21/2" 2.45 2" AFS 406 N-112 11/2" NPT 38 96.82 134 44.45 114 65 37 30 21 M20 x 65 3/4"x 21/2" 2.55
Pipe Flanges SAE - Socket Weld Flange Hochdruckfl nsche 11 Material: 1 ST 44.3 (FE 430) ............................Carbon Steel 2. 1.4404 316L..................................Stainless ordering code: ∗L = 13.5 UNC flange only AFG... flange including metric screws and o-ring AFG...M flange including UNC screws and o-ring AFG...U 3.000 Series Size Type A B C D E F G H J L M(Screws) Weight kg Metric UNC 1/2" AFS080S 21.6 13 38.10 54 17.48 46 36 16 19 9.0 M8 x 30 5/16" x 11/4" 0.25 1/2" AFS 080 S-038 17.5 13 38.10 54 17.48 46 36 16 19 9.0 M8 x 30 5/16" x 11/4" 0.28 1/2" AFS 080 S A20 20.3 13 38.10 54 17.48 46 36 16 19 9.0 M8 x 30 5/16" x 11/4" 0.25 3/4" AFS100S 27.2 19 47.63 65 22.23 50 36 18 19 11.0 M10 x 35 3/8" x 11/2" 0.39 3/4" AFS 100 S A25 25.3 19 47.63 65 22.23 50 36 18 19 11.0 M10 x 35 3/8" x 11/2" 0.39 1" AFS102S 34.0 25 52.37 70 26.19 55 38 18 19 11.0 M10 x 35 3/8" x 11/2" 0.46 1" AFS 102 S A30 30.3 25 52.37 70 26.19 55 38 18 19 11.0 M10 x 35 3/8" x 11/2" 0.46 11/4" AFS104S 42.8 32 58.72 79 30.18 68 41 21 22 11.5 M10 x 40 7/16" x 11/2" 0.66 11/4" AFS 104 S A38 38.3 32 58.72 79 30.18 68 41 21 22 11.5 M10 x 40 7/16" x 11/2" 0.66 11/2" AFS106S 48.6 38 69.85 93 35.71 78 45 25 24 13.5 M12 x 45 1/2" x 13/4" 1.05 11/2" AFS 106 S A50 50.5 38 69.85 93 35.71 78 45 25 24 13.5 M12 x 45 1/2" x 13/4" 1.05 2" AFS108S 61.0 51 77.77 102 42.88 90 45 25 26 13.5 M12 x 45 1/2" x 13/4" 1.19 21/2" AFS110S 76.6 63 88.90 114 50.80 105 50 25 30 13.5 M12 x 45 1/2" x 13/4" 1.40 3" AFS112S 90.5 73 106.38 134 61.93 124 50 27 34 17.5 M16 x 50 5/8" x 2" 2.15 31/2" AFS114S 103.0 89 120.65 152 69.85 136 48 27 34 17.5 M16 x 50 5/8" x 2" 2.40 3" AFS116S 115.5 99 130.18 162 77.77 146 48 27 34 17.5 M16 x 50 5/8" x 2" 2.85 6.000 Series 1/2" AFS 401 S-012 21.6 13 40.49 54 18.24 46 36 16 19 9.0 M8 x 30 5/16" x 11/4" 0.26 1/2" AFS 401 S-038 17.5 13 40.49 54 18.24 46 36 16 19 9.0 M8 x 30 5/16" x 11/4" 0.29 1/2" AFS 401 S A20 20.3 13 40.49 54 18.24 46 36 16 19 9.0 M8 x 30 5/16" x 11/4" 0.26 3/4" AFS402S 27.2 19 50.80 71 23.80 55 35 21 22 11.0 M10 x 35 3/8" x 11/2" 0.50 3/4" AFS 402 S A25 25.3 19 50.80 71 23.80 55 35 21 22 11.0 M10 x 35 3/8" x 11/2" 0.50 1" AFS403S 34.0 25 57.15 81 27.76 65 42 25 22 13.0 M12 x 45 7/16" x 13/4" 0.76 1" AFS 403 S A30 30.3 25 57.15 81 27.76 65 42 25 22 13.0 M12 x 45 7/16" x 13/4" 0.76 11/4" AFS404S 42.8 32 66.68 95 31.75 78 45 27 25 ∗ 15.0 M14 x 45 1/2" x 13/4" 1.20 11/4" AFS 404 S A38 38.3 32 66.68 95 31.75 78 45 27 25 ∗ 15.0 M14 x 45 1/2" x 13/4" 1.20 11/2" AFS405S 48.6 38 79.38 112 36.50 94 50 30 28 17.5 M16 x 50 5/8" x 2" 1.65 11/2" AFS 405 S A50 50.5 38 79.38 112 36.50 94 50 30 28 17.5 M16 x 50 5/8" x 2" 1.65 2" AFS406S 61.0 51 96.82 134 44.45 114 65 37 24 21.0 M20 x 65 3/4" x 21/2" 2.45 21/2" AFS407S 76.6 63 123.80 180 58.70 152 80 45 30 26.0 M24 x 75 - 8.30
Pipe Flanges SAE - Butt Welded Flange Hochdruckfl nsche 12 Material: 1 ST 44.3 (FE 430)............................Carbon Steel 2. 1.4404 316L..................................Stainless ordering code: ST 44.3 1.4404 ∗13.5 fo UNC screws flange only AFS...ST AFx...ST flange with metric screws and o-ring AFS...STM AFx...STM flange with UNC screws and o-ring AFS...STU AFx...STU 3.000 Series Size Type A B C D E F G H ØL M(Screws) Weight kg Metric UNC 1/ 2" AFS080ST 21.6 13.0 38.10 54 17.48 46 36 16 9.0 M8 x 30 5/ 16" x 11/ 4" 0.28 1/ 2" AFS 080 ST-038 17.5 13.0 38.10 54 17.48 46 36 16 9.0 M8 x 30 5/ 16" x 11/ 4" 0.25 3/ 4" AFS100ST 28.0 19.0 47.63 65 22.23 50 36 18 11.0 M10 x 35 3/ 8" x 11/ 2" 0.39 1" AFS102ST 34.0 25.0 52.37 70 26.19 55 38 18 11.0 M10 x 35 3/ 8" x 11/ 2" 0.46 11/ 4" AFS104ST 42.8 32.0 58.72 79 30.18 68 41 21 11.5 M10 x 40 7/ 16" x 11/ 2" 0.66 11/ 2" AFS106ST 48.6 38.0 69.85 93 35.71 78 44 25 13.5 M12 x 45 1/ 2" x 13/ 4" 1.05 2" AFS108ST 61.0 51.0 77.77 102 42.88 90 45 25 13.5 M12 x 45 1/ 2" x 13/ 4" 1.19 21/ 2" AFS110ST 77.0 63.0 88.90 114 50.80 105 50 25 13.5 M12 x 45 1/ 2" x 13/ 4" 1.40 3" AFS112ST 92.0 73.0 106.38 134 61.93 124 50 27 17.5 M16 x 50 5/ 8" x 2" 2.15 31/ 2" AFS114ST 103.0 89.0 120.65 152 69.85 136 48 27 17.5 M16 x 50 5/ 8" x 2" 2.40 4" AFS116ST 115.5 99.0 130.18 162 77.77 146 48 27 17.5 M16 x 50 5/ 8" x 2" 2.85 5" AFS118ST 140.2 120.0 152.40 184 92.08 180 50 28 17.5 M16 x 55 5/ 8" x 2" 5.20 6.000 Series 1/ 2" AFS 401 ST-012 21.5 13.0 40.49 54 18.24 46 36 16 9.0 M8 x 30 5/ 16" x 11/ 4" 0.29 1/ 2" AFS 401 ST-038 17.5 13.0 40.49 54 18.24 46 36 16 9.0 M8 x 30 5/ 16" x 11/ 4" 0.26 3/ 4" AFS402ST 28.0 19.0 50.80 71 23.80 55 35 21 11.0 M10 x 35 3/ 8" x 11/ 2" 0.50 1" AFS403ST 34.0 25.0 57.15 79 27.76 68 41 21 13.0 M12 x 45 7/ 16" x 13/ 4" 0.76 11/ 4" AFS404ST 42.8 32.0 66.68 93 31.75 78 44 25 ∗ 15.0 M14 x 45 1/ 2" x 13/ 4" 1.20 11/ 4" AFS 404 ST 160 42.8 29.0 66.68 93 31.75 78 44 25 ∗ 15.0 M14 x 45 1/ 2" x 13/ 4" 1.35 11/ 2" AFS405ST 48.6 38.0 79.38 112 36.50 94 55 30 17.0 M16 x 50 5/ 8" x 2" 1.65 11/ 2" AFS 405 ST 160 48.6 34.0 79.38 112 36.50 94 55 30 17.0 M16 x 50 5/ 8" x 2" 1.80 2" AFS406ST 61.0 51.0 96.82 134 44.45 114 65 37 21.0 M20 x 65 3/ 4" x 21/ 2" 2.45 2" AFS 406 ST 160 61.0 43.0 96.82 134 44.45 114 65 37 21.0 M20 x 65 3/ 4" x 21/ 2" 2.70 21/ 2" AFS 407 ST 76 76.1 51.0 123.80 180 58.70 152 80 45 26.0 M24 x 75 - 6.40 21/ 2" AFS 407 ST 88 90.0 60.5 123.80 180 58.70 152 80 45 26.0 M24 x 75 - 8.30
Pipe Flanges SAE - Weld On Flange - Metric Pipes Hochdruckfl nsche 13 Material: 1 ST 44.3 (FE 430)............................Carbon Steel 2. 1.4404 316L ..................................Stainless Steel ordering code: ST 44.3 1.4404 flange only AFS... AFx... flange with metric screws and o-ring AFS...M AFx...M flange with UNC screws and o-ring AFS...U AFx...U 3.000 Series Size Type Tube A B1 B2 C D E F G H ØL M(Screws) Weight kg Metric UNC 1/ 2" AFS 080 SRE 20 20 x 3 20 14.0 14 38.10 54 17.48 46 35.0 16.0 9.0 M8 x 30 5/ 16" x 11/ 4" 0.28 1/ 2" AFS 080 SRE 22 22 x 3 22 16.0 13 38.10 54 17.48 46 35.0 16.0 9.0 M8 x 30 5/ 16" x 11/ 4" 0.28 3/ 4" AFS 100 SRE 25 25 x 3 25 19.0 19 47.63 65 22.23 50 36.0 18.0 11.0 M10 x 35 3/ 8" x 11/ 2" 0.39 3/ 4" AFS 100 SRE 28 28 x 3 28 21.5 19 47.63 65 22.23 50 36.0 18.0 11.0 M10 x 35 3/ 8" x 11/ 2" 0.39 1" AFS 102 SRE 30 30 x 4 30 22.0 22 52.37 70 26.19 55 38.0 18.0 11.0 M10 x 35 3/ 8" x 11/ 2" 0.46 1" AFS 102 SRE 35 35 x 3 35 27.0 25 52.37 70 26.19 55 38.0 18.0 11.0 M10 x 35 3/ 8" x 11/ 2" 0.47 11/ 4" AFS 104 SRE 38 38 x 4 38 30.0 30 58.72 79 30.18 68 41.0 21.0 11.5 M10 x 40 7/ 16" x 11/ 2" 0.66 11/ 4" AFS 104 SRE 42 42 x 3 43 36.0 31 58.72 79 30.18 68 41.0 21.0 11.5 M10 x 40 7/ 16" x 11/ 2" 0.66 11/ 2" AFS 106 SRE 38 38 x 4 38 30.0 30 69.85 93 35.71 78 44.5 24.5 13.5 M12 x 45 1/ 2" x 13/ 4" 1.05 11/ 2" AFS 106 SRE 42 42 x 3 42 36.0 36 69.85 93 35.71 78 44.5 24.5 13.5 M12 x 45 1/ 2" x 13/ 4" 1.05 11/ 2" AFS 106 SRE 48 48.3 x 4.5 49 38.0 38 69.85 93 35.71 78 44.5 24.5 13.5 M12 x 45 1/ 2" x 13/ 4" 1.05 2" AFS 108 SRE 60 60.3 x 5.6 61 49.0 49 77.77 102 42.88 90 45.0 25.0 13.5 M12 x 45 1/ 2" x 13/ 4" 1.20 21/ 2" AFS 110 SRE 76 76.1 x 7.1 77 62 62 88.90 114 50.80 105 50.0 25.0 13.5 M12 x 45 1/ 2" x 13/ 4" 1.40 3" AFS 112 SRE 76 76.1 x 7.1 77 62 62 106.38 134 61.93 124 51.0 26.0 17.5 M16 x 50 5/ 8" x 2" 2.15
Pipe Flanges SAE - Butt Weld to - Metric Pipes ND40 Hochdruckfl nsche 14 Material: 1 ST 44.3 (FE 430)............................Carbon Steel 2. 1.4404 316L..................................Stainless ordering code: ST 44.3 1.4404 ∗13.5 for UNC screws flange only AFS... AFx... flange with metric screws and o-ring AFS...M AFx...M flange with unc screws and o-ring AFS...U AFx...U 3.000 Series Size Type Tube A B1 B2 C D E F G H ØL M(Screws) Weight kg Metric UNC 1/ 2" AFS 401 SRE 20 20 x 3 20 14 14 40.49 54 18.24 46 34 16 9 M8 x 30 5/ 16 " x 11/ 4 " 0.29 3/ 4" AFS 402 SRE 20 20 x 3 20 14 14 50.80 71 23.80 55 35 21 11 M10 x 35 3/ 8 " x 11/ 2 " 0.50 3/ 4" AFS 402 SRE 25 25 x 4 25 17 17 50.80 71 23.80 55 35 21 11 M10 x 35 3/ 8 " x 11/ 2 " 0.53 1" AFS 403 SRE 25 25 x 4 25 17 17 57.15 81 27.76 65 42 25 13 M12 x 45 7/ 16 " x 11/ 2 " 0.76 1" AFS 403 SRE 30 30 x 4 30 22 22 57.15 81 27.76 65 42 25 13 M12 x 45 7/ 16 " x 11/ 2 " 0.80 11/ 4" AFS 404 SRE 30 30 x 4 30 22 22 66.68 95 31.75 78 44 25 ∗ 15 M14 x 45 1/ 2 " x 13/ 4 " 1.20 11/ 4" AFS 404 SRE 38 38 x 6 38 26 26 66.68 95 31.75 78 44 25 ∗ 15 M14 x 45 1/ 2 " x 13/ 4 " 1.29 11/ 2" AFS 405 SRE 38 38 x 6 38 26 26 79.38 112 36.50 94 56 28 17 M16 x 50 5/ 8 " x 2" 1.52 11/ 2" AFS 405 SRE 48 48.3 x 8 49 32 32 79.38 112 36.50 94 56 28 17 M16 x 50 5/ 8 " x 2" 1.57 11/ 2" AFS 405 SRE 60 60.3 x 10 61 40 40 79.38 112 36.50 94 56 28 17 M16 x 50 5/ 8 " x 2" 1.65 2" AFS 406 SRE 60 60.3 x 10 61 40 40 96.82 134 44.45 114 65 33 21 M20 x 60 3/ 4 " x 21/ 2 " 2.45 2" AFS 406 SRE 76 76.1 x 12.5 76 48 48 96.82 134 44.45 114 80 33 21 M20 x 60 3/ 4 " x 21/ 2 " 2.96
Pipe Flanges SAE - Butt Weld to - Metric Pipes ND40 Hochdruckfl nsche 15 Material: 1 ST 44.3 (FE 430)............................Carbon Steel 2. 1.4404 316L ..................................Stainless Steel ordering code: ST 44.3 1.4404 flange only AFS... AFx... flange with metric screws and o-ring AFS...M AFx...M flange with UNC screws and o-ring AFS...U AFx...U 3.000 Series Size Type Tube A B1 B2 C D E F G H ØL M(Screws) Weight kg Metric UNC 1/ 2" AFS 080 STRE 21.3 21.3 x 2.6 22.0 16.0 13 38.10 54 17.48 46 35.0 16.0 9.0 M8 x 30 5/ 16" x 11/ 4" 0.28 3/ 4" AFS 100 STRE 26.9 26.9 x 2.6 28.0 21.5 19 47.63 65 22.23 50 36.0 18.0 11.0 M10 x 35 3/ 8" x 11/ 2" 0.39 1" AFS 102 STRE 33.7 33.7 x 3.2 35.0 27.0 25 52.37 70 26.19 55 38.0 18.0 11.0 M10 x 35 3/ 8" x 11/ 2" 0.46 11/ 4" AFS 104 STRE 42.4 42.4 x 3.2 43.0 36.0 31 58.72 79 30.18 68 41.0 21.0 11.5 M10 x 40 7/ 16" x 11/ 2" 0.66 11/ 2" AFS 106 STRE 48.3 48.3 x 3.2 49.0 42.0 38 69.85 93 35.71 78 44.5 24.5 13.5 M12 x 45 1/ 2" x 13/ 4" 1.05 2" AFS 108 STRE 48.3 48.3 x 3.2 49.0 42.0 42 77.77 102 42.88 90 45.0 25.0 13.5 M12 x 45 1/ 2" x 13/ 4" 1.12 2" AFS 108 STRE 60.3 60.3 x 3.6 61.0 53.0 49 77.77 102 42.88 90 45.0 25.0 13.5 M12 x 45 1/ 2" x 13/ 4" 1.19 21/ 2" AFS 110 STRE 60.3 60.3 x 3.6 61.0 53.0 53 88.90 114 50.80 105 50.0 25.0 13.5 M12 x 45 1/ 2" x 13/ 4" 1.31 21/ 2" AFS 110 STRE 76.1 76.1 x 3.6 77.0 70.0 62 88.90 114 50.80 105 50.0 25.0 13.5 M12 x 45 1/ 2" x 13/ 4" 1.40 3" AFS 112 STRE 88.9 88.9 x 3.6 90.0 82.0 74 106.38 134 61.93 124 51.0 26.0 17.5 M16 x 50 5/ 8" x 2" 2.15 31/ 2" AFS 114 STRE 88.9 88.9 x 3.6 90.0 82.0 82 120.65 152 69.85 136 48.0 26.0 17.5 M16 x 50 5/ 8" x 2" 2.40 31/ 2" AFS 114 STRE 76.1 76.1 x 3.6 77.0 70.0 70 120.65 152 69.85 136 48.0 26.0 17.5 M16 x 50 5/ 8" x 2" 2.38 4" AFS 116 STRE 88.9 88.9 x 3.6 90.0 82.0 82 130.18 162 77.77 146 48.0 26.0 17.5 M16 x 50 5/ 8" x 2" 2.75 4" AFS 116 STRE 114 114.0 x 3.6 115.0 107.0 102 130.18 162 77.77 146 48.0 26.0 17.5 M16 x 50 5/ 8" x 2" 2.85 5" AFS 118 STRE 139FL 139.7 x 4.0 141.0 - 131 152.40 190 92.10 170 28.0 28.0 17.5 M16 x 50 5/ 8" x 2" 2.80 5" AFS 118 STRE 139 139.7 x 4.0 140.2 131 120 152.40 184 92.08 180 50.0 28.0 17.5 M16 x 55 - 5.00
Pipe Flanges SAE - UN - Threaded Flange Hochdruckfl nsche 16 Material: 1 ST 44.3 (FE 430)............................Carbon Steel 2. 1.4404, 316L..................................Stainless Steel ordering code: ST 44.3 1.4404 ∗13.5 for UNC Screws flange only AFS...T AFx...T flange including metric screws and o-ring AFS...TM AFx...TMx flange including UNC screws and o-ring AFS...TU AFx...TUx 3.000 Series Size Type A B C D E F G H J ØL U E Z M(Screws) Weight kg Metric UNC 1/ 2" AFS080T 3/ 4" 16UNF 13 38.10 54 17.48 46 36 16 17 9.0 20.6 2.5 15° M8 x 30 5/ 16" x 11/ 4" 0.25 3/ 4" AFS100T 11/ 16" 12UN 19 47.63 65 22.23 50 36 18 23 11.0 29.2 3.3 15° M10 x 35 3/ 8" x 11/ 2" 0.39 1" AFS102T 15/ 16" 12UN 25 52.37 70 26.19 55 38 18 23 11.0 35.5 3.3 15° M10 x 35 3/ 8" x 11/ 2" 0.46 11/ 4" AFS104T 15/ 8" 12UN 32 58.72 79 30.18 68 41 21 23 11.5 43.5 3.3 15° M10 x 40 7/ 16" x 11/ 2" 0.66 11/ 2" AFS106T 17/ 8" 12UN 38 69.85 93 35.71 78 45 25 23 13.5 49.8 3.3 15° M12 x 45 1/ 2" x 13/ 4" 1.05 6.000 Series 1/ 2" AFS401T 3/ 4" 16UNF 13 40.49 54 18.24 46 36 16 17 9 20.6 2.5 15° M8 x 30 5/ 16" x 11/ 4" 0.26 3/ 4" AFS402T 11/ 16" 12UN 19 50.80 71 23.80 55 35 21 23 11 29.3 3.3 15° M10 x 35 3/ 8" x 11/ 2" 0.50 1" AFS403T 15/ 16" 12UN 25 57.15 81 27.76 65 42 25 23 13 35.5 3.3 15° M12 x 45 7/ 16" x 13/ 4" 0.76 11/ 4" AFS404T 15/ 8" 12UN 32 66.68 95 31.75 78 45 27 23 ∗ 15 43.5 3.3 15° M14 x 45 1/ 2" x 13/ 4" 1.20 11/ 2" AFS405T 17/ 8" 12UN 38 79.38 112 36.50 94 50 30 23 17 49.8 3.3 15° M16 x 50 5/ 8" x 2" 1.65
Pipe Flanges SAE - BSP Threaded 90°C Elbow Hochdruckfl nsche 17 Material: 1 ST 44.3 (FE 430) ST 52.3 (FE 510) ..............Carbon Steel 2. 1.4404 316L ....................................................Stainless Steel ordering code: ST 44.3 1.4404 ∗13.5 for UNC screws flange only AFS.../90 G AFx.../90 G flangewith metric screws and o-ring AFS.../90 GM AFx.../90 GMx falnge with UNC screws and o-ring AFS.../90 GU AFx.../90 GUx 3.000 Series Size Type A B C D E F1 F2 H J ØL S1 S2 M(Screws) Weight kg Metric UNC 1/ 2" AFS 080/90 G R 1/ 2" 13 38.10 54 17.48 60 48 16.0 19 9.0 20 37 M8 x 30 5/ 16" x 11/ 4" 0.35 1/ 2" AFS 080/90 G-038 R 3/ 8" 13 38.10 54 17.48 60 48 16.0 19 9.0 20 37 M8 x 30 5/ 16" x 11/ 4" 0.35 3/ 4" AFS 100/90 G R 3/ 4" 19 47.63 65 22.23 63 52 18.0 19 11.0 24 38 M10 x 35 3/ 8" x 11/ 2" 0.55 1" AFS 102/90G R1" 25 52.37 70 26.19 70 60 19.0 20 11.0 28 43 M10 x 35 3/ 8" x 11/ 2" 0.80 11/ 4" AFS104/90 G R11/ 4" 32 58.72 79 30.18 85 73 21.0 22 11.5 34 51 M10 x 40 7/ 16" x 11/ 2" 1.30 11/ 2" AFS 106/90 G R11/ 2" 38 69.85 93 35.71 95 83 25.0 25 13.5 38 56 M12 x 45 1/ 2" x 13/ 4" 1.60 2" AFS 108/90 G R2" 51 77.77 110 42.88 110 94 25.0 28 13.5 42 65 M12 x 45 5/ 8" x 2" 2.00 6.000 Series 1/ 2" AFS 401/90 G-012 R 1/ 2" 13 40.49 54 18.24 60 46 16.0 19 9 20 37 M8 x 30 5/ 16" x 11/ 4" 0.35 1/ 2" AFS 401/90 G-038 R 3/ 8" 13 40.49 54 18.24 60 46 16.0 19 9 20 37 M8 x 30 5/ 16" x 11/ 4" 0.35 3/ 4" AFS 402/90 G R 3/ 4" 19 50.80 70 23.80 70 56 19.0 20 11 28 43 M10 x 35 3/ 8" x 11/ 2" 0.80 1" AFS 403/90 G R1" 25 57.15 79 27.76 85 72 21.0 22 13 34 51 M12 x 45 7/ 16" x 13/ 4" 1.30 11/ 4" AFS 404/90 G R11/ 4" 32 66.68 93 31.75 95 75 25.0 25 ∗ 15 38 56 M14 x 50 1/ 2" x 13/ 4" 1.60 11/ 2" AFS 405/90 G R11/ 2" 38 79.38 110 36.50 94 94 25.0 28 17 42 65 M16 x 50 5/ 8" x 2" 2.00 2" AFS 406/90 G R2" 51 96.82 134 50.00 150 106 76.5 28 21 60 92 M20 x 110 - 8.20
Pipe Flanges SAE - NPT Threaded 90° Elbow Hochdruckfl nsche 18 Material: 1 ST 44.3 (FE 430) ST 52.3 (FE 510) ...........Carbon Steel 2. 1.4404 316L ................................................. Stainless Steel ordering code: ST 44.3/52.3 1.4404 ∗13.5 for UNC screws flange only AFS.../90 N AFx.../90 N flangewith metric screws and o-ring AFS.../90 NM AFx.../90 NM flange with UNC screws and o-ring AFS.../90 NU AFx.../90 NU 3.000 Series Size Type A B C D E F1 F2 H J ØL S1 S2 M(Screws) Weight kg Metric UNC 1/ 2" AFS 080/90 N 1/ 2"NPT 13 38.10 54 17.48 60 48 16.0 19 9.0 20 37 M8 x 30 5/ 16" x 11/ 4" 0.35 1/ 2" AFS 080/90 N-038 3/ 8"NPT 13 38.10 54 17.48 60 48 16.0 19 9.0 20 37 M8 x 30 5/ 16" x 11/ 4" 0.35 3/ 4" AFS 100/90 N 3/ 4"NPT 19 47.63 65 22.23 63 52 18.0 19 11.0 24 38 M10 x 35 3/ 8" x 11/ 2" 0.55 1" AFS 102/90 N 1"NPT 25 52.37 70 26.19 70 60 19.0 20 11.0 28 43 M10 x 35 3/ 8" x 11/ 2" 0.80 11/ 4" AFS104/90 N 11/ 4"NPT 32 58.72 79 30.18 85 73 21.0 22 11.5 34 51 M10 x 40 7/ 16" x 11/ 2" 1.30 11/ 2" AFS 106/90 N 11/ 2"NPT 38 69.85 93 35.71 95 83 25.0 25 13.5 38 56 M12 x 45 1/ 2" x 13/ 4" 1.60 2" AFS 108/90 N 2"NPT 51 77.77 110 42.88 110 94 25.0 28 13.5 42 65 M12 x 45 5/ 8" x 2" 2.00 6.000 Series 1/ 2" AFS 401/90 N-012 1/ 2"NPT 13 40.49 54 18.24 60 46 16.0 19 9.0 20 37 M8 x 30 5/ 16" x 11/ 4" 0.35 1/ 2" AFS 401/90 N-038 3/ 8"NPT 13 40.49 54 18.24 60 46 16.0 19 9.0 20 37 M8 x 30 5/ 16" x 11/ 4" 0.35 3/ 4" AFS 402/90 N 3/ 4"NPT 19 50.80 70 23.80 70 55 19.0 20 11.0 28 43 M10 x 35 3/ 8" x 11/ 2" 0.80 1" AFS 403/90 N 1"NPT 25 57.15 79 27.76 85 72 21.0 22 13.0 34 51 M12 x 45 7/ 16" x 13/ 4" 1.30 11/ 4" AFS 404/90 N 11/ 4"NPT 32 66.68 93 31.75 95 75 25.0 25 ∗ 15.0 38 56 M14 x 50 1/ 2" x 13/ 4" 1.60 11/ 2" AFS 405/90 N 11/ 2" NPT 38 79.38 110 36.50 94 110 25.0 28 17.0 42 65 M16 x 50 5/ 8" x 2" 2.00
www.jbj.co.ukRkJQdWJsaXNoZXIy NzQyNjQ=