01737 767493 info@jbj.co.uk www.jbj.co.uk - registered in England No: 1185469 - jbj Techniques Limited is ISO certificated, committed to international coordination & unification of industrial standards. A range of products ATEX certificated to directive 94/9/E requirements i Easy-to-mount unit features clutch assembly with shaft and bearings in rigid cast iron housing. Designed for manual operation on all internal combustion engines with standard SAE flywheel housing from No. 6 to No. 00. • Single-plate 6.5 to 14 SAE • Double-plate 11.5 to 18 SAE • Triple-plate 14 to 21 SAE • Capacities to 1454 kW (1950 hp), torque to 11,389 Nm (8400 lb-ft) Limited Attendance To meet the oil field pumping requirement for a power take-off that can operate continuously for six months without additional lubrication, Twin Disc offers a line of Limited Attendance PTOs. These units cover a range of 21 to 195 kW (28 to 261 hp). Pump drives A complete range of one pad to eight pad Pump Drive units for applications requiring total maximum input torque to 3346 Nm (2468 lb-ft). Maximum input power is up to 876 kW (1175 hp) @ 2000 rpm depending on ratio. Pads through SAE “F” can be provided. Input options include clutches, rubber block drives, flex-plates and independent types. Output options include special “live” output clutch PTO units and independent shafts. Depending on the unit, a wide variety of both reduction and increasing ratios are available. an excellence in engineering www.jbj.co.uk/ .html mechanical-power-conversion Standard Mechanical Power Take-Off Units You Tube
RkJQdWJsaXNoZXIy NzQyNjQ=