Standard IB Series Clutch IB214P Series www.jbj.co.uk/mechanical-power-conversion.html #DriveLineHarmony Dimensions are in mm (inches) The following general formula should be used for determining the actual applied load: L = Actual applied load kg (lbs) N = Shaft speed (rpm) D = Pitch diameter mm (inches) of pulley, etc. F = Load factor, 1.0 for chain or gear drive, 1.5 for timing belts, 2.5 for all V belts, 3.5 for flat belts. LF = 2.1 for reciprocating compressors and other severe shock drives and 1.8 for large inertia type drives (i.e. Crushers, chippers, planers, etc.) Compound Drives and Power Engaged Power Take-Off applications must have written factory review. IB214P0 IB214P0 M2137 RPM PTO Model 25.4 (1.0) 50.8 (2.0) 76.2 (3.0) 101.6 (4.0) 127.0 (5.0) X Distance, mm (in) – see diagram IB214P0 & IB214P1 – Allowable Side Load, kg (lbs) 152.4 (6.0) 177.8 (7.0) (Imperial) L = x F x LF 126,000 x HP N x D (metric) L = x F x LF 1945010 x kW N x D 38 3629 (8000) 1000 3425 (7550) 3175 (7000) 3425 (7550) 1200 3243 (7150) 3084 (6800) 2665 (5875) 3039 (6700) 1800 2869 (6325) 2722 (6000) 2790 (6150) 2400 2631 5800) 2495 (5500) 2381 (5250) 2279 (5025) 1826 (4025) 1826 (4025) IB214P1 M1985 1000 1200 1800 2790 (6150) 2400 2989 (6590) 2340 (5160) 1928 (4250) 1633 (3600) 1420 (3130) 1252 (2760) 1120 (2470)
RkJQdWJsaXNoZXIy NzQyNjQ=