Pumps & Motors with Support GHM2-T Series Accessories supplied with the standard motor: » Woodruff key (code 522057) » M12 x 1.5 hexagonal nut (code 523016) – Torque setting 50 ±4 Nm » Washer (code 523005). Standard ports: M6 threads depth 13mm, M8 threads depth 17 mm. The tapered shaft is also available with 3.2 mm key (“T3”). G¹⁄ ” drain port thread depth 12 mm. Cast iron flange – cast iron cover. Type Displacement Flow at Maximum Pressure Maximum Dimensions 1500 rev/min P P P Speed L M d h H I C P 3 cm /rev litres/min bar bar bar rpm mm mm mm mm GHM2-R-6-E1-T 4.5 6.4 280 270 295 4000 69.9 116.4 13 M6 30 GHM2-R-9-E1-T 6.4 9.1 280 270 295 4000 71.4 119.4 13 M6 30 GHM2-R-10-E1-T 7.0 10.0 280 270 295 4000 71.9 120.4 13 M8 40 GHM2-R-12-E1-T 8.3 11.8 280 270 295 3500 72.9 122.4 13 M8 40 GHM2-R-13-E1-T 9.6 13.7 280 270 295 3000 73.9 124.4 13 M8 40 GHM2-R-16-E1-T 11.5 16.4 280 270 295 4000 75.4 127.4 19 M8 40 GHM2-R-20-E1-T 14.1 20.1 260 250 275 4000 77.4 131.4 19 M8 40 GHM2-R-22-E1-T 16.0 22.8 260 250 275 4000 78.9 134.4 19 M8 40 GHM2-R-25-E1-T 17.9 25.5 260 250 275 3600 80.4 137.4 19 M8 40 GHM2-R-30-E1-T 21.1 30.1 230 220 245 3200 82.9 142.4 19 M8 40 GHM2-R-34-E1-T 23.7 33.7 180 170 195 3000 84.9 146.4 19 M8 40 GHM2-R-37-E1-T 25.5 36.4 170 160 185 2800 86.4 149.4 19 M8 40 GHM2-R-40-E1-T 28.2 40.1 160 150 175 2500 88.4 153.4 19 M8 40 25 www.jbj.co.uk/gear-motors.html #DriveLineHarmony
RkJQdWJsaXNoZXIy NzQyNjQ=