Pumps & Motors with Support GHP2-T Series Accessories supplied with the standard pump: » Woodruff key (code 522057). » M12 x 1.5 hexagonal nut (code 523016) - Torque setting 50 ±4 Nm. » Washer (code 523005). Standard ports: M6 threads depth 13mm, M8 threads depth 17 mm. The tapered shaft is also available with 3.2 mm Key (“T3”). Cast iron flange – cast iron cover. Type Displacement Flow at Maximum Pressure Maximum Dimensions 1500 rev/min P P P Speed L M d D h H 1 2 3 3 cm /rev litres/min bar bar bar rpm mm mm mm mm mm GHP2-D-6-T 4.5 6.4 280 295 310 4000 66.9 110.4 13 13 M6 30 GHP2-D-9-T 6.4 9.1 280 295 310 4000 68.4 113.4 13 13 M6 30 GHP2-D-10-T 7.0 10.0 280 295 310 4000 68.9 114.4 13 13 M8 40 GHP2-D-12-T 8.3 11.8 280 295 310 3500 69.9 116.4 13 13 M8 40 GHP2-D-13-T 9.6 13.7 280 295 310 3000 70.9 118.4 13 13 M8 40 GHP2-D-16-T 11.5 16.4 280 295 310 4000 72.4 121.4 19 13 M8 40 GHP2-D-20-T 14.1 20.1 260 275 290 4000 74.4 125.4 19 13 M8 40 GHP2-D-22-T 16.0 22.8 260 275 290 4000 75.9 128.4 19 13 M8 40 GHP2-D-25-T 17.9 25.5 260 275 290 3600 77.4 131.4 19 13 M8 40 GHP2-D-30-T 21.1 30.1 230 245 260 3200 79.9 136.4 19 19 M8 40 GHP2-D-34-T 23.7 33.7 180 195 210 3000 81.9 140.4 19 19 M8 40 GHP2-D-37-T 25.5 36.4 170 185 200 2800 83.4 143.4 19 19 M8 40 GHP2-D-40-T 28.2 40.1 160 170 180 2500 85.4 147.4 19 19 M8 40 GHP2-D-50-T 3 35.2 50.2 120 130 140 2500 90.9 158.4 21 19 M8 40 www.jbj.co.uk/gear-pumps.html #DriveLineHarmony 22
RkJQdWJsaXNoZXIy NzQyNjQ=