Pumps & Motors with Support ALM2A - T Series Accessories supplied with the standard motor: » Key (code 522067) » Mounting flange 82-2 (A) in compliance with SAE J 744c. “D” and “d” standard ports are machined in compliance with the norm SAE J 1926/1 (ISO 11926 - 1) (Threaded port with O-ring seal in truncated housing). ¹⁄ -28 UNF thread depth 16mm. G¹⁄ ” drain port thread depth 12 mm. Cast iron flange – aluminium cover Type Displacement Flow at Maximum Pressure Maximum Dimensions 1500 rev/min P P P Speed L M I C P 3 cm /rev litres/min bar bar bar rpm mm mm ALM2A-R-6-E1-T 4.5 6.4 250 240 270 4000 69.9 117.9 ALM2A-R-9-E1-T 6.4 9.1 250 240 270 4000 71.4 120.9 ALM2A-R-10-E1-T 7.0 10.0 250 240 270 4000 71.9 121.9 ALM2A-R-12-E1-T 8.3 11.8 250 240 270 4000 72.9 123.9 ALM2A-R-13-E1-T 9.6 13.7 250 240 270 4000 73.9 125.9 ALM2A-R-16-E1-T 11.5 16.4 230 220 250 4000 75.4 128.9 ALM2A-R-20-E1-T 14.1 20.1 230 220 250 3200 77.4 132.9 ALM2A-R-22-E1-T 16.0 22.8 210 200 225 2800 78.9 135.9 ALM2A-R-25-E1-T 17.9 25.5 210 200 225 2500 80.4 138.9 ALM2A-R-30-E1-T 21.1 30.1 180 170 195 2200 82.9 143.9 ALM2A-R-34-E1-T 23.7 33.7 180 170 195 2000 84.9 147.9 ALM2A-R-37-E1-T 25.5 36.4 170 160 185 1800 86.4 150.9 ALM2A-R-40-E1-T 28.2 40.1 160 150 170 1800 88.4 154.9 www.jbj.co.uk/gear-pumps.html #DriveLineHarmony 20
RkJQdWJsaXNoZXIy NzQyNjQ=