Pumps & Motors with Support ALP2A-T Series Accessories supplied with the standard pump: » Key (code 522067) » Mounting flange 82-2 (A) in compliance with SAE J744c. “D” and “d” standard ports are machined in compliance with the norm SAE J 1926/1 (ISO 11926-1) (Threaded port with O-ring seal in truncated housing). ¹⁄ -28 UNF thread depth 16 mm. Cast iron flange – aluminium cover Type Displacement Flow at Maximum Pressure Maximum Dimensions 1500 rev/min P P P Speed L M I 2 3 3 cm /rev litres/min bar bar bar rpm mm mm ALP2A-D-6-T 4.5 6.4 250 270 290 4000 66.9 111.9 ALP2A-D-9-T 6.4 9.1 250 270 290 4000 68.4 114.9 ALP2A-D-10-T 7.0 10.0 250 270 290 4000 68.9 115.9 ALP2A-D-12-T 8.3 11.8 250 270 290 4000 69.9 117.9 ALP2A-D-13-T 9.6 13.7 250 270 290 4000 70.9 119.9 ALP2A-D-16-T 11.5 16.4 230 250 270 4000 72.4 122.9 ALP2A-D-20-T 14.1 20.1 230 250 270 3200 74.4 126.9 ALP2A-D-22-T 16.0 22.8 210 225 240 2800 75.9 129.9 ALP2A-D-25-T 17.9 25.5 210 225 240 2500 77.4 132.9 ALP2A-D-30-T 21.1 30.1 180 195 210 2200 79.9 137.9 ALP2A-D-34-T 23.7 33.7 180 195 210 2000 81.9 141.9 ALP2A-D-37-T 25.5 36.4 170 185 200 1800 83.4 144.9 ALP2A-D-40-T 28.2 40.1 160 170 180 1800 85.4 148.9 ALP2A-D-50-T 35.2 50.2 120 130 140 2000 90.9 159.9 17 www.jbj.co.uk/gear-motors.html #DriveLineHarmony
RkJQdWJsaXNoZXIy NzQyNjQ=