MPV 025 C Model 3 cm 6,962 MPV 040 C 28,515 MPV 060 B 1 impulse 96,238 3 cm/rev 13.923 57.03 2 impulse/turn 192.48 It/rev 0.013923 0.05703 2 impulse/turn 0.19248 Table 2 Setting Data MPV 025 C Model Bar 400 MPV 040 C 400 MPV 060 B Pressure 150 Table 3 SCREW PUMPS Flow Meters MPV Series Characteristics 3 #DriveLineHarmony Max Operating Pressure Characteristics Key: Blue: std range (accuracy class 0,2% read value). Grey: extended range (accuracy class 0,4% read value). Orange: over range (use possible with accuracy < 0,5 %). LPM MPV Model Use this graph below to select the most suitable MPV size for your application. (Other sizes available on request – contact jbj Techniques Limited, telephone: 01737 767493 or email info@jbj.co.uk) Important information for proper selection Always to be considered the following: » Nominal and maximum flow rate in the system. » Accuracy readings required at system operating conditions. » Pressure inlet (bar). » Pressure drops (according to table at page 7). » Minimum fluid temperature (make system maximum viscosity). » Maximum fluid temperature (make sensor choice). Difference between inlet P (bar) must not be less than the MPV pressure drops. www.jbj.co.uk/flow-meters.html
RkJQdWJsaXNoZXIy NzQyNjQ=