KM11-RM250 series radial piston motors

LSHT Hydraulic Motors KM32 Radial Piston Motors 11 Average specification torque (Nm/bar): 0.48 Mineral oil H-LP in conformity with DIN 51524 part 2. Bio-degradable fluids available on request. Continuous pressure (bar): 160 Theoretical specification torque (Nm/bar): 0.52 Peak pressure* (bar): 315 Hydraulic fluid temperature range (K): 243 to 363 Hydraulic characteristic values: KM Max. operating pressure** (bar): 250 2 (maximum 1000 mm /s at start) Max. operating torque (Nm): 120 HFC Reduce HFC pressure to 70 %. Check the bearing service life. HFD Viton seals are required. Definition to CETOP RP 77 H ISO/DIS 6071. 2 Viscosity range (mm /s): 20 to 150 Drain line pressure (bar) max. 1: max. 1 2 Moment of inertia (kgm ): 0,00028 Continuous torque (Nm): 76.8 (°C): -30 to +90 Peak pressure = Pressure exceeding the maximum operating pressure for a short time at which the motor remains able to function. Filtering: Max. permissible degree of contamination of the pressure fluid according to NAS 1638 class 9. Filters with aminimum retention rate of β ≥100 recommended. 10 For a long service life we recommend filtering acc. to NAS 1638 class 8 and filters with aminimum retention rate of β ≥100. 5 Operating speed range (rpm): 10 : 1500 3 Geometric displacement (cm /rev): 33 * Definition according to DIN 24 312. Intermittent power (kW): 7.5 Pressure fluids: HM and HV, definition to CETOP RP 75 H (mineral oil based fluids). Characteristic values according to VDI 3278 Continuous power (kW): 6.0 Mounting position as : required Direction of rotation, if viewed at the shaft end clockwise: flow from connection 2 to connection 1, anti-clockwise: flow from connection 1 to connection 2 ** If the sum of inlet pressure and outlet pressure is higher than the peak pressure, please consult jbj Techniques technical office, telephone: +44 (0)1737 767493 or email: info@jbj.co.uk Weight (kg): 17.4 Flange DIN-ISO 3019/2 KM 32 ZAF