www.jbj.co.uk/mechanical-power-conversion.html Hydraulic Power Take-Off Units HP300I Series 14 #DriveLineHarmony 669.6 mm (26.36") 480.8 mm (18.93") “X” SAE 0, X = 711.2 mm (28.00") SAE 1, X = 552.45 mm (21.75") Torsional Vibration Responsibility for ensuring that the torsional compatibility of the drive train is satisfactory rests with the assembler of the drive and driven equipment, regardless of whether jbj Techniques supplies the flexible input coupling or it is customer supplied. Torsional vibration analysis can be made by the engine builder, independent consultants or others. jbj Techniques is prepared to assist in finding solutions to potential torsional problems that relate to the jbj Techniques supplied equipment. jbj Techniques reminds users of these products that their safe operation depends on use in compliance with engineering information provided in our catalogue. Users are also reminded that safe operation depends on proper installation, operation and routine maintenance and inspection under prevailing conditions. It is the responsibility of users (and not jbj Techniques Ltd) to provide and install guards or safety devices which may be required by recognized safety standards or by the Occupational Safety and Health Act of 1970 and its subsequent provisions.
RkJQdWJsaXNoZXIy NzQyNjQ=