www.jbj.co.uk/electromagnetic-clutches.html Electromagnetic Clutches Typical Applications 2 #DriveLineHarmony INDUSTRIAL CORP OGURA Advantages of use: »Simple installation. »Operator convenience/safety. Mobile Clutches: 78.64 to 237.27 Nm (58 to 175 lb-ft). These are flangemounted, normally a two piece construction clutch typically mounted directly on to the pumps. »Cold weather starting. Solid forged rotor. »Extended pump life. »Reduced horsepower consumption from the engine. »Lower operator cost. Although 12 volt is themost common, 24 volts can also bemade available. Depending upon the quantity, other specialty voltages can bemade High temperature, longer life grease. Different coil voltages available. Forgedmachined pulley All models in this section use a heavy duty machined pulley.Astronger pulley resists damage due to abusive environments. Where possible, all parts in the clutch are e-coated to givemaximum corrosion protection. To help prevent failure fromboth vibration and outside contaminants, all coils are sealed in the coil shell with a high temperature epoxy coating. High temperature epoxy coil. Aone piece solid forged rotor means no chance of internal parts separation. Our rotors also have an even wall thickness around the coil which gives optimum flux distribution, maximizing torque. All models include our special long life grease which has shown a significant improvement in life over other standard high temperature greases. E-coating. Auto air conditioning compressors Hydraulic pumps Air compressor and vacuum pumps Water pumps
RkJQdWJsaXNoZXIy NzQyNjQ=