Drive Shafts & Yoke Drives available from Techniques Limited

www.jbj.co.uk/drive-shafts.html Mechanical Power Transmission Magnum Drive Shafts 2 #DriveLineHarmony The following components will last much longer than the inserts. What you can do to check the integrity of the drive shaft is while the inserts are removed pull and push on the centre of the drive shaft. If you feel movement then the bearings and following components should be changed before testing is continued. A complete rebuild consists of the following: Part Number W10 Qty: 2 (Washer) If inserts need to be replaced you will want to order the itembelow: Remember toGrease universal joints every 250 hours (Do not over fill). Use high-pressure lithium grease. Universal joints should be checked each time the inserts are changed to ensure they do not need to be replaced. The maintenance working on these cells should be able to tell the difference between a good and bad universal joint. Important: If there is any damage to themetal ring or other metal components a complete rebuild should be performed. Part Number 210PP Qty: 4 (Bearings) Part Number N10 Qty: 2 (Lock Nut) Part Number 720615 Qty: 1 (1 Set = 10 drive inserts) Part Number 568-152 Qty: 4 (O-Ring) Part Number CP85WB-HWD Qty: 2 (Universal joint)

RkJQdWJsaXNoZXIy NzQyNjQ=