Mechanical Power Transmission Disc Couplings SX-6 Performance Data 12 SX-6 Type Industrial Coupling The SX-6 Type is a standard coupling with two hubs, a spacer, and two disc pack kits. The coupling has two flex planes (one at each disc pack) so it can accommodate parallel misalignment by the angular misalignment in each disc pack. This configuration will also accommodate axial misalignment within the specified limits. Note * indicates: Operating speed must be equal or less than permissible speed. 2 indicates: Couplings as manufactured can accommodate maximum speeds as listed. Higher speeds listed as 'Bal' require special balancing. 3 indicates: The maximum bores shown are for cylindrical or taper shafts with keys. For splines and other bore types, contact jbj Techniques Limited technical office, telephone: +44 (0)1737 767493 or email:info@jbj.co.uk 4 indicates: Weight is given for a complete coupling with maximum bores. 5 indicates: Axial misalignment is given for one disc pack. 6 indicates: Angular misalignment is given for one disc pack. For higher torque capacities, see SX-8 Type couplings on pages 14 and 15. Features » Unitized disc pack. » Infinite life when properly aligned. » Accommodates angular, axial, and parallel misalignment. » Torsionally rigid without any back lash. » No need for lubrication or maintenance. » No wearing parts and high resistance to harsh environmental conditions. » Overload bushings are available, see page 4 www.jbj.co.uk/disc-couplings.html #DriveLineHarmony
RkJQdWJsaXNoZXIy NzQyNjQ=