Concentric-F20LS/F30LS LOADSENSE PUMPS-2011-6 9 (F3)- F-30LS-4- E-91-D-A-1-B-L-30 HowTo Order F30LS Series Pumps Load Sense Port: 7/16-20 for all sizes ** Multiple pumps available. Contact factory. Patent #5,244,358 Patent #5,368,061 EXAMPLE: 1 2 3 4 5 6 7 8 9 10 11 12 Special Seals Pump Type Series Front Cover Inlet Port Displacement Outlet Bypass Port Shaft Seal Shaft Type Unload Pressure Shaft Rotation R. V. Setting ORDERING INFORMATION Each option has been assigned an order code -- listed in the tables below -- for placement in the sequence shown at right. 1 (Special Seals) Order Code Description F3 Viton Seal Omit Standard 2 (Pump Type) Order Code Description F Ferra Series Gear Pump 3 (Series) Order Code Description 30LS F30 Load Sense ** 4 (Mounting Flange) Order Code Description 4 SAE "C" 4-Bolt Mount 6 SAE "B" 2 & 4-Bolt Combination Mount (consult factory) 7 SAE "C" 2-Bolt Mount 8 SAE "C" 2 & 4-Bolt Combination Mount 5 (Inlet Port Connections) Order Code Description D 1.50", SAE 4-Bolt Split Flange DM 1.50", 4-Bolt Metric Split Flange (M12 x 1.75" Threads) E 2.00", SAE 4-Bolt Split Flange EM 2.00", 4-Bolt Metric Split Flange (M12 x 1.75" Threads) W #20 SAE (1 5/8" - 12) Straight Thread X #24 SAE (1 7/8" - 12) Straight Thread Y #30 SAE (2 1/2" - 12) Straight Thread 6 (Displacement) Order Code Cm3/In3 Order Code Cm3/In3 58 58/3.54 104 104/6.30 68 68/4.13 113 113/6.88 80 80/4.91 129 129/7.86 91 91/5.51 145 145/8.84 97 97/5.89 161 161/9.82 7 (Outlet and Bypass Port Connections) Order Code Description C 1.250", SAE 4-Bolt Split Flange CM 1.250", 4-Bolt Metric Split Flange (M10 x 1.50" Threads) D 1.50", SAE 4-Bolt Split Flange DM 1.50", 4-Bolt Metric Split Flange (M12 x 1.75" Threads) V #16 SAE (1.3125" - 12) Straight Thread W #20 SAE (1 5/8" - 12) Straight Thread X #24 SAE (1 7/8" - 12) Straight Thread NOTE: The same port size must be selected for both the outlet and bypass ports. 8 (Shaft Seal) Order Code Description A Single B Double J Double, Outer Inverted X None 9 (Shaft Types) Order Code Description 1 SAE "C" Straight Keyed, 1.250" Dia., 1.875" Ext. 12 SAE "C" 14-Tooth Spline (Flat Root-Side Fit) 18 * SAE "B" 13-Tooth Spline (Flat Root-Side Fit) * Only available for Displacements 58 & 68. Contact factory for requirements not listed above. 10 (Unload Pressure) Order Code Description A 30 PSI Standard Bypass Spring B* 60 PSI Bypass Spring * "B" unload spring option required when system contains a high rate compensator spring in the directional control valve. 11 (Shaft Rotation) Order Code Description L Counterclockwise Omit Clockwise 12 (Relief Valve Setting) Order Code Description 10 1000 PSI (69 BAR) 12 1250 PSI (86 BAR) 15 1500 PSI (103 BAR) 17 1750 PSI (121 BAR) 20 2000 PSI (138 BAR) 22 2250 PSI (155 BAR) 25 2500 PSI (172 BAR) 27 2750 PSI (190 BAR) 13 (Load Sense Options) Order Code Description A Standard Load Sense B 12 VDC with Spade Connector 14 (Design Designation) Order Code Description 20 Modification Level Design Level Standard factory relief valve setting is 2500 PSI (172 BAR). Contact factory for other settings. quality products for mechanical & fluid power ~ jbj Techniques Limited, www.jbj.co.uk UK distributor for Concentric Hydraulics
RkJQdWJsaXNoZXIy NzQyNjQ=