Concentric AB-F20/F30 PMP-2011-06 29 Model Code for F202009 Series Triple Pumps 10 (Rear Section Inlet Port) Order Code Description A 16 cc - 19 cc, .75”, SAE 4-Bolt Split Flange B 23 cc - 28 cc, 1”, SAE 4-Bolt Split FlangeStraight Thread S 6 cc, #10 SAE (7/8” - 14) Straight Thread T 8 cc - 16 cc, #12 SAE (1 1/16” - 12) Straight Thread V 19 cc - 28 cc, #16 SAE (1 5/16” - 14) Straight Thread 11 (Displacements, Rear Section) Order Code Cm 3 /In 3 Order Code Cm 3 /In 3 6- 6 cc/.366 in. 3 16- 16 cc/.976 in. 3 8- 8 cc/.488 in. 3 19- 19 cc/1.159 in. 3 10- 10 cc/.610 in. 3 23- 23 cc/1.403 in. 3 11- 11 cc/.671 in. 3 27- 27 cc/1.647 in. 3 14- 14 cc/.854 in. 3 28- 28 cc/1.709 in. 3 GPM @ 1200 RPM, 100 PSI 12 (Rear Section Outlet Port) Order Code Description A 23 cc - 28 cc, .75”, SAE 4-Bolt Split Flange Q 6 cc, #8 SAE (3/4” - 16) Straight Thread S 8 cc - 16 cc, #10 SAE (7/8” - 14) Straight Thread T 19 cc - 28 cc, #12 SAE (1 1/16” - 12) Straight Thread Y 16 cc - 19 cc, .5”, SAE 4-Bolt Split Flange Contact factory for other requirements. 13 (Drive Shaft) Order Code Description 21 SAE “BB” Straight Keyed, 1.00” Diameter, 1.50” Ext. 99 SAE “BB” 15-Tooth Spline, Flat Root-Side Fit Contact factory for other requirements. 14 (Shaft Seal) Order Code Description A Single Shaft Seal (30 PSI) D High Pressure (100 PSI) G Double Shaft Seals, Outer Inverted, Buna (for wet mounting applications) H Double Shaft Seals, Outer Inverted, Viton (for wet mounting applications) K Double Shaft Seals, Excluder Outer, Buna Inner (for dry mounting applications) M Double Shaft Seals, Excluder Outer, Viton Inner (for dry mounting applications) X None 15 (Design Designation) Order Code Description 10 Standard 11 Sealed Between G20 and 09 Sections 16 (Rotation) Order Code Description L Counterclockwise Rotation R Clockwise Rotation Contact factory for other requirements. EXAMPLE: (F3)- F202009- W- 2 - F- 13- T 13- V- A - 23- Q- 21 - B -10- L Center Section Outlet Porting Rotation Special Seals Series Mount Type Front Cover Front Inlet Port Displacements, Front Section Front Outlet Port Displacements, Center Section Rear Section Inlet Port Displacements, Rear Section Rear Section Outlet Porting Drive Shaft 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Shaft Seal Design Designation ORDERING INFORMATION Each option has been assigned an order code -- listed in the tables below -- for placement in the sequence shown at right. 1 (Special Seals) Order Code Description F3 Viton Seal Omit Standard 2 (Series) Order Code Description F202009 F202009 Series Triple Gear Pump 3 (Mount Type) Order Code Description W Wet Mounting Flange (pilot diameter sealing and provides for optional double shaft seal) Contact factory for other requirements. 4 (Front Cover) Order Code Description 2 SAE “B” 2-Bolt Mount 6 SAE “B” 2/4-Bolt Combination Mount (wet mount only) 8 SAE “C” 2/4-Bolt Mount 5 (Front Section Inlet Port) Order Code Description E 2”, SAE 4-Bolt Split Flange EM 2”, SAE 4-Bolt Metric Split Flange (M14 x 2.0” threads) F 2.5”, SAE 4-Bolt Split Flange FM 2.5”, SAE 4-Bolt Metric Split Flange (M14 x 2.0” threads) Contact factory for other requirements. 6 (Displacements, Front Section) Order Code Cm 3 /In 3 Order Code Cm 3 /In 3 7- 23 cc/1.41 in. 3 17- 55 cc/3.33 in. 3 9- 29 cc/1.79 in. 3 19- 62 cc/3.77 in. 3 11- 36 cc/2.18 in. 3 21- 68 cc/4.13 in. 3 13- 43 cc/2.60 in. 3 24- 77 cc/4.71 in. 3 15- 48 cc/2.94 in. 3 27- 87 cc/5.30 in. 3 GPM @ 1200 RPM, 100 PSI 7 (Front Section Outlet Port) Order Code Description B 1.00”, SAE 4-Bolt Split Flange BM 1.00”, SAE 4-Bolt Metric Split Flange (M10 x 1.50” threads) C 1.25”, SAE 4-Bolt Split Flange CM 1.25”, SAE 4-Bolt Metric Split Flange (M12 x 1.75” threads) T #12 SAE (1 1/16” - 12) Straight Thread V #16 SAE (1 5/16” - 12) Straight Thread Contact factory for other requirements. 8 (Displacements, Center Section) Order Code Cm 3 /In 3 Order Code Cm 3 /In 3 7- 23 cc/1.41 in. 3 17- 55 cc/3.33 in. 3 9- 29 cc/1.79 in. 3 19- 62 cc/3.77 in. 3 11- 36 cc/2.18 in. 3 21- 68 cc/4.13 in. 3 13- 43 cc/2.60 in. 3 24- 77 cc/4.71 in. 3 15- 48 cc/2.94 in. 3 27- 87 cc/5.30 in. 3 GPM @ 1200 RPM, 100 PSI 9 (Center Section Outlet Porting) Order Code Description B 1.00”, SAE 4-Bolt Split Flange BM 1.00”, SAE 4-Bolt Metric Split Flange (M10 x 1.50” threads) C 1.25”, SAE 4-Bolt Split Flange CM 1.25”, SAE 4-Bolt Metric Split Flange (M12 x 1.75” threads) T #12 SAE (1 1/16” - 12) Straight Thread V #16 SAE (1 5/16” - 12) Straight Thread Contact factory for other requirements. quality products for mechanical & fluid power ~ jbj Techniques Limited, www.jbj.co.uk UK distributor for Concentric Hydraulics
RkJQdWJsaXNoZXIy NzQyNjQ=