Concentric AB-F20/F30 PMP-2011-06 21 Model Code for F3030 Series Double Pumps EXAMPLE: (F3)- F3030- W- 7 - E- 30- B - + - 30- B - 12- A- 10 - L Special Seals Series Mount Front Cover Inlet Port Displacements Front Outlet Port Displacements Rear Outlet Port Drive Shaft Shaft Seal Design Designation Rotation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Rear Inlet Port 10 (Rear Outlet Port) Order Code Description A .750”, SAE 4-Bolt Split Flange AM .750”, SAE 4-Bolt Metric Split Flange (M10 x 1.50” threads) B 1.00”, SAE 4-Bolt Split Flange BM 1.00”, SAE 4-Bolt Metric Split Flange (M10 x 1.50” threads) C 1.250”, SAE 4-Bolt Split Flange CM 1.250”, SAE 4-Bolt Metric Split Flange (M10 x 1.50” threads) V #16 SAE (1 5/16” - 12) Straight Thread Contact factory for other requirements. 11 (Drive Shaft) Order Code Description 1 SAE “C” Straight Keyed, 1.250” Diameter, 1.875” Ext. 12 SAE “C” 14-Tooth Spline, Flat Root-Side Fit Contact factory for other requirements. 12 (Shaft Seal) Order Code Description A Single Shaft Seal (30 PSI) D High Pressure (100 PSI) G Double Shaft Seals, Outer Inverted, Buna (for wet mounting applications) H Double Shaft Seals, Outer Inverted, Viton (for wet mounting applications) K Double Shaft Seals, Excluder Outer, Buna Inner (for dry mounting applications) M Double Shaft Seals, Excluder Outer, Viton Inner (for dry mounting applications) X None 13 (Design Designation) Order Code Description 10 Standard 14 (Rotation) Order Code Description R Clockwise Rotation L Counterclockwise Rotation ORDERING INFORMATION Each option has been assigned an order code -- listed in the tables below -- for placement in the sequence shown at right. 1 (Special Seals) Order Code Description F3 Viton Seal Omit Standard 2 (Series) Order Code Description F3030 F3030 Series Double Gear Pump 3 (Mount) Order Code Description W Wet Mount Flange (pilot diameter sealing and provides for optional double shaft seal) 4 (Front Cover) Order Code Description 4 SAE “C” 4-Bolt Mount (contact factory) 7 SAE “C” 2-Bolt Mount (contact factory) 8 SAE “C” 2/4-Bolt Combination Mount 5 (Inlet Port) Order Code Description E 2.00”, SAE 4-Bolt Split Flange EM 2.00”, 4-Bolt Metric Split Flange (M14 x 2.0” threads) F 2.50”, SAE 4-Bolt Split Flange FM 2.50”, 4-Bolt Metric Split Flange (M14 x 2.0” threads) G 3.00”, SAE 4-Bolt Split Flange GM 3.00”, 4-Bolt Metric Split Flange (M16 x 2.0” threads) Y #30 SAE (2 1/2” - 12) Straight Thread Contact factory for other requirements. 6 (Displacements, Front Section) Order Code Cm 3 /In 3 Order Code Cm 3 /In 3 18- 58 cc/3.54 in. 3 32- 104 cc/6.30 in. 3 21- 68 cc/4.13 in. 3 35- 113 cc/6.88 in. 3 25- 80 cc/4.91 in. 3 40- 129 cc/7.86 in. 3 28- 91 cc/5.51 in. 3 45- 145 cc/8.84 in. 3 30- 97 cc/5.89 in. 3 50- 161 cc/9.82 in. 3 7 (Front Outlet Port) Order Code Description B 1.00”, SAE 4-Bolt Split Flange BM 1.00”, SAE 4-Bolt Metric Split Flange (M10 x 1.50” threads) C 1.250”, SAE 4-Bolt Split Flange CM 1.250”, SAE 4-Bolt Metric Split Flange (M12 x 1.75” threads) D 2.00”, SAE 4-Bolt Split Flange DM 2.00”, SAE 4-Bolt Metric Split Flange (M14 x 2.0” threads) V #16 SAE (1 5/16” - 12) Straight Thread W #20 SAE (1 5/8” - 12) Straight Thread X #24 SAE (1 7/8” - 12) Straight Thread Contact factory for other requirements. 8 (Rear Inlet Port) (Contact Factory) Order Code Description + None 9 (Displacements, Rear Section) Order Code Cm 3 /In 3 Order Code Cm 3 /In 3 18- 58 cc/3.54 in. 3 32- 104 cc/6.30 in. 3 21- 68 cc/4.13 in. 3 35- 113 cc/6.88 in. 3 25- 80 cc/4.91 in. 3 40- 129 cc/7.86 in. 3 28- 91 cc/5.51 in. 3 45- 145 cc/8.84 in. 3 30- 97 cc/5.89 in. 3 50- 161 cc/9.82 in. 3 quality products for mechanical & fluid power ~ jbj Techniques Limited, www.jbj.co.uk UK distributor for Concentric Hydraulics
RkJQdWJsaXNoZXIy NzQyNjQ=