www.jbj.co.uk/bearing-supported-stub-shafts.html 1 #DriveLineHarmony Stub shaft drive plates fit SAE depressed centre flywheels. They are designed for use with a flexible coupling to direct drive auxiliary components. See L-Series or flexible couplings for shaft-to-shaft adaptor to fit your application. Side loading requires the use of a pillow block bearing or supported stub shaft option. When placing an order, please use the part number listed below. NOTE: Stub shafts for the SAE 14 clutches and larger are available on a non-stock basis. Special sizes, diameters and shaft lengths (keyed and overall) are available upon request. SAE 4 & 5 Side Load Plates available from stock. Contact jbj Techniques technical office, telephone: +44 (0)1737 767493 or email: info@jbj.co.uk for more details. If it is determined that your assembly needs greater side load capabilities than a straight shaft and single bearing design, please contact us to discuss the use of our exclusive bearing supported stub shafts as described in the following pages. 26-01A52 7.50 95.25 mm (3.75") 152.4 mm (6") 38.1 mm (1.50") ³⁄ " 26-02S53 8 Special Special Special Special 26-0AA52 7.50 95.25 mm (3.75") 152.4 mm (6") 36.51 mm (1.4375") ³⁄ " Stub Shaft Drive Plates Part Number SAE Clutch Size Keyed Shaft Overall Length Shaft Ø Key Size 26-02A52 7.50 95.25 mm (3.75") 152.4 mm (6") 44.45 mm (1.75") ³⁄ " 26-01G54 10 95.25 mm (3.75") 152.4 mm (6") 38.1 mm (1.50") ³⁄ " 26-03B54 10 136.53 mm (5.375") 203.2 mm (8") 50.80 mm (2") ¹⁄ " 26-01A53 8 Special Special Special Special 26-01A51 6.50 95.25 mm (3.75") 152.4 mm (6") 38.1 mm (1.50") ³⁄ " 26-04A55 11.5 95.25 mm (3.75") 152.4 mm (6") 57.15 mm (2.25") ¹⁄ " 26-05A55 11.5 95.25 mm (3.75") 152.4 mm (6") 63.50 mm (2.5") ⁵⁄ " 26-02B64 10 136.53 mm (5.375") 203.2 mm (8") 44.45 mm (1.75") ³⁄ " 26-03G54 10 95.25 mm (3.75") 152.4 mm (6") 50.80 mm (2") ¹⁄ " 26-02A51 6.50 95.25 mm (3.75") 152.4 mm (6") 44.45 mm (1.75") ³⁄ " Features and advantages » Custom shafts. » Standard SAE. » Tapered generator shafts. » Single bearing supports (Light Loads). » Various sizes from 36.51 mm (1⁷⁄ ″) to 63.50 mm (2¹⁄ ″). » Approved by many engine manufactures. » Very cost effective for in-line applications. Mechanical Power Transmission SAE Stub Shafts » Band saws » Compressors » Concrete trowel » Stump grinders » Generators … and much more. Applications » Chippers
RkJQdWJsaXNoZXIy NzQyNjQ=