ALPC/GHPC Short Multiple Gear Pumps Short Multiple Pumps ALPC1 and GHPC1 are special type of two stages and three stages multiple pumps with reduced axial length. Upon request and after verification of the functioning cycle and operating conditions those pumps can be eventually provided with more than three stages. ALPC1 are pumps with diecast flange and cover. GHPC1 are pumps with cast iron flange and cover. A special common inlet version with just one inlet port feeding two or three elements is also available. Contact jbj Techniques Limited, technical office, telephone: 01737 767493 or email: info@jbj.co.uk for further information regarding different possible configurations, displacements and relative operating conditions. Technical features 3 3 Displacement: from 1.4 cm /rev. to 13.8 cm /rev. ~ Maximum pressures refer to 1P-ALP-GHP catalogue rpm pump range: from 1,000 rpm to 4,000 rpm Ports: Common inlet (option) ~ Side ports code E, FG, FC, FA. Flanges and shafts: As 1P, ALP1, ALP1AQ models refer to 1P-ALP-GHP catalogue ALPC2 and GHPC2 are special type of two stages and three stages multiple pumps with reduced axial length. Upon request and after verification of the functioning cycle and operating conditions those pumps can be eventually provided with more than three stages. ALPC2 are pumps with diecast flange and cover. GHPC2 are pumps with cast iron flange and cover. A special common inlet version with just one inlet port feeding two or three elements is also available. Contact jbj Techniques Limited, technical office, telephone: 01737 767493 or email: info@jbj.co.uk for further information regarding different possible configurations, displacements and relative operating conditions. Technical features 3 3 Displacement: from 4.5 cm /rev. to 35.2 cm /rev. ~ Maximum pressures refer to ALP-GHP catalogue rpm pump range: from 1,000 rpm to 4,000 rpm Ports: Common inlet (option) ~ Side ports code E, EP, FG, FC, FA, D, rear ports KA Flanges and shafts: As ALP2, ALP2A, ALP2BK models refer to ALP-GHP catalogue ALPC3 and GHPC3 are special type of two stages and three stages multiple pumps with reduced axial length. Upon request and after verification of the functioning cycle and operating conditions those pumps can be eventually provided with more than three stages. ALPC3 are pumps with diecast flange and cover. GHPC3 are pumps with cast iron flange and cover. A special common inlet version with just one inlet port feeding two or three elements is also available. Contact jbj Techniques Limited, technical office, telephone: 01737 767493 or email: info@jbj.co.uk for further information regarding different possible configurations, displacements and relative operating conditions. Technical features 3 3 Displacement: from 20 cm /rev. to 87 cm /rev. ~ Maximum pressures refer to ALP-GHP catalogue Continuous max. pressure: refer to ALP-GHP catalogues rpm pump range: from 1,000 rpm to 4,000 rpm Ports: Common inlet (option) ~ Side ports code E, EP, FG, FC, FA, A, D. Flanges and shafts: As A, A2,BK1,5 refer to ALP-GHP catalogues www.jbj.co.uk/gear-pumps.html #DriveLineHarmony 9
RkJQdWJsaXNoZXIy NzQyNjQ=