Marzocchi ALP series gear pumps, groups 1, 2, 3 and 4 including relief valve and shaft supported versions from jbj Techniques Limited

20 22 26 33 39 44 52 78 87 ALP3 Series 71 61 3 Displacement (cm /rev) 1.4 2.1 2.8 3.5 4.1 5.2 6.2 7.6 9.3 11.0 ALP1 Series 13.8 4.5 6.4 7.0 9.6 11.5 14.1 16.0 28.2 ALP2 Series 23.7 21.1 17.9 35.2 Product Series Range Produced in three different groups with very good power/weight ratio and power/size ratio allowing a wide range of displacements within each group (between 1.4 and 87 cc/rev). The wide range of speeds, the excellent functionality, also when used in series, with strong counter-pressures and limited drain, give the GHP series pumps very good characteristics even starting under load. A range of flanges, shafts, inlet and pressure ports are available. Reversible pumps and pumps with independent driving systems are also available. Gear Pumps ALP Series Product Range 7 www.jbj.co.uk/gear-pumps.html #DriveLineHarmony Special Versions For special uses are also available: "V" Version suitable for fluid at high temperatures. Range between -10°C and +120°C. In the range between -10°C and +80°Cmaximum pressures as stated in the individual product tables are allowed; beside that figures in the ‘P1’ column of the tables should not be exceeded. "VV" Version suitable for fluid at high temperatures. Range between -10°C and +150°Cwithmaximumpressure 20 bar "ST" Version suitable for fluid at high or low temperature. Range between -40°C and +120°C. In the range between -10 °C and +80°C maximum pressures as stated in the individual product table; below and beside that figures in the ‘P1’ column of the tables should not be exceeded. "H" Version suitable for fluid at low temperature. Range between -40°C and +80°C. In the range between -10 °C and +80°C maximum pressures as stated in the product table; below that figures in the ‘P1’ column of the tables should not be exceeded. “TR” Version suitable for inlet pressure up tomax. 6 bar absolute. The above descriptions are to be specified in the SEALfield of the ordering code. Contact jbj Techniques technical office for assistance in selection of correct pump for your application, telephone: +44 (0)1737 767493, email: info@jbj.co.uk 87 106 128 181 200 ALP4 Series 166 147

RkJQdWJsaXNoZXIy NzQyNjQ=