Gear Pumps ALP1A Series Accessories supplied with the standard pump: key (code 522070). Mounting flange 50-2 (A-A) in compliance with SAE J744c. "D" and "d" standard ports are machined in compliance with threaded port with O-ring seal in truncated housing SAE J1926/1 (ISO 11926-1). compliance with threaded port with O-ring seal in truncated housing SAE J1926/1 (ISO 11926-1). 15 www.jbj.co.uk/gear-pumps.html #DriveLineHarmony OUTLET INLET Type Displacement Flow at Maximum Pressure Maximum Dimensions 1500 rev/min P P P Speed L M d D I 2 3 3 cm /rev litres/min bar bar bar rpm mm mm ALP1A-D-2 1.4 2.0 250 270 290 6000 42 82.5 ⁹⁄ -18 UNF ³⁄ -16 UNF ALP1A-D-3 2,1 2,9 250 270 290 6000 43 84,5 ⁹⁄ -18 UNF ³⁄ -16 UNF ALP1A-D-4 2,8 3,9 250 270 290 5000 44 86,5 ⁹⁄ -18 UNF ³⁄ -16 UNF ALP1A-D-5 3,5 4,9 250 270 290 5000 45 88,5 ⁹⁄ -18 UNF ³⁄ -16 UNF ALP1A-D-6 4,1 5,9 250 270 290 4000 46 90,5 ⁹⁄ -18 UNF ³⁄ -16 UNF ALP1A-D-7 5,2 7,4 230 245 260 3500 47,5 93,5 ⁹⁄ -18 UNF ³⁄ -16 UNF ALP1A-D-9 6,2 8,8 230 245 260 3000 49 96,5 ⁹⁄ -18 UNF ³⁄ -16 UNF ALP1A-D-11 7,6 10,8 200 215 230 3500 51 100,5 ³⁄ -16 UNF ⁷⁄ -14 UNF ALP1A-D-13 9,3 13,3 180 195 210 3000 53,5 105,5 ³⁄ -16 UNF ⁷⁄ -14 UNF ALP1A-D-16 11,0 15,7 170 185 200 2500 56 110,5 ³⁄ -16 UNF ⁷⁄ -14 UNF ALP1A-D-20 13,8 19,7 150 165 180 2000 60 118,5 ³⁄ -16 UNF ⁷⁄ -14 UNF
RkJQdWJsaXNoZXIy NzQyNjQ=