4 www.jbj.co.uk/hydraulic-motors.html #DriveLineHarmony (optional / not suitable for combination with connections B and B5) Class AE 3-5 AE 10-21 AE 22-45 A Displacement 3 4 5 10 16 21 22 32 40 45 B Drive shaft Z: Cylindrical drive shaft with feather key ● ● ● ● ● ● ● ● ● ● Z8: Cylindrical drive shaft ø28 x 50 long with feather key - - - - - - ● ● ● ● suitable in combination with F16 flange acc. IEC-norm Z68: Cylindrical drive shaft ø24 x 50 long with feather key - - - - - - ● ● ● ● W2: Conical drive shaft with grub screw - - - ● ● ● - - - - F: four hole flange ● ● ● ● ● ● ● ● ● ● F1: three hole flange - - - - ● ● ● - - - - F16: four hole flange / design CEI-IEC 72-2 - - - ○ ○ ○ ● ● ● ● B5 IEC 100/112 Standard for special/aggressive operation fluids. H Special version S: Several customized solutions are available on request. ● ● ● ● ● ● ● ● ● ● Z76: Cylindrical drive shaft ø19 x 36 long with feather key - - - ● ● ● - - - - D Control version *: Not specified (translatory steering disc) ● ● ● ● ● ● ● ● ● ● A1: Connection face for valve block mountings - - - ● ● ● ● ● ● ● suitable in combination with F15 flange acc. IEC-norm E Sealing material *: Not specified (NBR sealing) ● ● ● ● ● ● ● ● ● ● V: FPM sealing: Suitable for a high temperature rang as well as ● ● ● ● ● ● ● ● ● ● G Flange version *: Not specified / without flange - - - - - - ● ● ● ● F15: four hole flange / design CEI-IEC 72-2 - - - ● ● ● ● ● ● ● (optional) II2D: II 2D c T4 ● ● ● ● ● ● ● ● ● ● shaft version M39: Cylindrical shaft ø10 without centring - - - ● ● ● ● ● ● ● B: Axial connection thread (metric) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ E5: Self readjusting clearance control version ● ● ● ● ● ● ● ● ● ● I ATEX II2G: II 2G c T4 ● ● ● ● ● ● ● ● ● ● suitable in combination with F15 flange acc. IEC-norm C Connections A: Radial connection thread - - - ○ ○ ○ ● ● ● ● E2: Servo quality, reduced clearance, enhanced activation piloting ● ● ● ● ● ● ● ● ● ● A34: Connection face with connection thread - - - ● ● ● - - - - K: Male involute splined drive shaft - - - ○ ○ ○ ○ ○ ○ ○ and concentric run-out characteristics B5: Axial connection thread (inch) ● ● ● ● ● ● ● ● ● ● (temperature adaptability, reduction of intern leakage) F Measuring M: Cylindrical shaft ø10 with centring - - - ● ● ● ● ● ● ● B5 IEC 80 (AE 10-21) / B5 IEC 90 (AE 22-45) IM2: I M2 c T4 ● ● ● ● ● ● ● ● ● ● Appropriate product codes will be assigned by the company. A B C D E F G H I N Product code: AE LSHT Hydraulic Motors AE3 - AE45 Series Product Code Key:● = available; ○ = on request; - = not available
RkJQdWJsaXNoZXIy NzQyNjQ=