Marzocchi gear micropumps are available in two different groups: 0.25 and 0.5, they differ only for the tooth profile. Different pump displacements within each group can be obtained by changing the thickness of the gear toothed band. Within the same group, different flanges, shafts, inlet and pressure ports are available. The following items are also available: - micropumps suitable for high pressure applications; - bi-rotational micropumps; - micropumps with check valves; - modular multiplemicropumps. Available displacements are indicated below: Gear Pumps Micro 0.25 & 0.5 Series Product Range 7 Special Versions The following 1Pmodels for special uses are available: V” - Version suitable for fluid hi-temperature applications. Range between –10°C and +120°Cwith P1, P2 and P3 as per product table. Range until +150°Cwithmax. pressure = 20 bar (please indicate actual values when ordering). “ST” - Version suitable for fluid at hi- or low-temperature applications. Range between –40°C and +120°C. “TR” - Version suitable for inlet pressure up tomax. 6 bar absolute. Contact jbj Techniques technical office for assistance in selection of correct pump for your application, telephone: +44 (0)1737 767493, email: info@jbj.co.uk As far as special versions are concerned, Marzocchi Pompe’s thirty-years experience in designing, developing and manufacturing mechanical micro fuel pumps, micro-pumps and integrated systems for "Racing" and "Automotive" applications will stand you in good stead. www.jbj.co.uk/gear-pumps.html #DriveLineHarmony 0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 0,19 0,26 0,32 0,38 0,51 0,64 0.25 0,50 0,63 0,88 1,00 1,25 1,50 0.5
RkJQdWJsaXNoZXIy NzQyNjQ=