M10x1 threads depth 9 mm. G¹⁄ threads depth 9 mm. To mount the pump: n. 2 M5 screws, with a torque wrench setting fixed at 5.4 ± 0.5 Nm. OPTIONS “KK”: also D inlet and outlet ports are present on the body, as well as on the correspondent standard version. www.jbj.co.uk/gear-pumps.html #DriveLineHarmony 16 Micro Hydraulic Gear Pumps U 0.25 - U 0.5 Series Type Displacement Flow at Maximum Pressure Maximum Dimensions 1500 rev/min P P P Speed M N L D I 2 3 3 cm /rev litres/mim bar bar bar rpm mm mm mm U 0.25 D 18 0.19 0.29 190 210 230 7000 54 44.5 24 M10 x 1 U 0.25 D 24 0.26 0.38 190 210 230 7000 55 45.5 24.5 M10 x 1 U 0.25 D 30 0.32 0.48 190 210 230 7000 56 46.5 25 M10 x 1 U 0.25 D 36 0.38 0.58 190 210 230 7000 57 47.5 25.5 M10 x 1 U 0.25 D 48 0.51 0.77 190 210 230 7000 59 49.5 26.5 M10 x 1 U 0.25 D 60 0.64 0.96 190 210 230 7000 61 51.5 27.5 M10 x 1 U 0.5 D 0.50 0.50 0.75 190 210 230 7000 63 53.5 28.5 G¹⁄ U 0.5 D 0.75 0.63 0.94 190 210 230 7000 64 54.5 29 G¹⁄ U 0.5 D 1.00 0.88 1.31 190 210 230 7000 66 56.5 30 G¹⁄ U 0.5 D 1.30 1.00 1.50 190 210 230 6000 67 57.5 30.5 G¹⁄ U 0.5 D 1.60 1.25 1.88 190 210 230 5000 69 59.5 31.5 G¹⁄ U 0.5 D 2.00 1.50 2.25 190 210 230 4000 71 61.5 32.5 G¹⁄ 4 -0.053 -0.02 Ø22 32 7.68 50 7.32 D 9.6 5.5 M L 5 N 21 8 8 30 55 D -0.014 +0 2 M6 -0.01 +0 6 6.8 9.5 -0.05 -0.01 5 Ø8 5.5 n.2 5.5 B B A 524980 A Porta "KK" "KK" Port "G" Shaft A-A Albero "G" B-B 16 OUTLET INLET MANDATA OUTLET
RkJQdWJsaXNoZXIy NzQyNjQ=