Concentric AB-F20/F30 PMP-2011-06 9 ORDERING INFORMATION Each option has been assigned an order code -- listed in the tables below -- for placement in the sequence shown at right. 1 (Special Seals) Order Code Description F3 Viton Seal Omit Standard 2 (Series) Order Code Description F30 F30 Series Single Gear Pump 3 (Mount Type) Order Code Description C Standard Designation 4 (Front Cover) Order Code Description 4 SAE “C” 4-Bolt Mount 6 SAE “B” 2/4-Bolt Combination Mount 7 SAE “C” 2-Bolt Mount 8 SAE “C” 2/4-Bolt Combination Mount 5 (Inlet Port) Order Code Description D 1.50”, SAE 4-Bolt Split Flange DM 1.50”, SAE 4-Bolt Metric Split Flange (M14 x 2.0” threads) E 2.00”, SAE 4-Bolt Split Flange EM 2.00”, 4-Bolt Metric Split Flange (M14 x 2.0” threads) W #20 SAE (1 5/8” - 12) Straight Thread X #24 SAE (1 7/8” - 12) Straight Thread Y #30 SAE (2 1/2” - 12) Straight Thread Contact factory for other requirements. 6 (Displacements) Order Code Cm 3 /In 3 Order Code Cm 3 /In 3 18- 58 cc/3.54 in. 3 32- 104 cc/6.30 in. 3 21- 68 cc/4.13 in. 3 35- 113 cc/6.88 in. 3 25- 80 cc/4.91 in. 3 40- 129 cc/7.86 in. 3 28- 91 cc/5.51 in. 3 45- 145 cc/8.84 in. 3 30- 97 cc/5.89 in. 3 50- 161 cc/9.82 in. 3 7 (Outlet Port) Order Code Description B 1.00”, SAE 4-Bolt Split Flange BM 1.00”, SAE 4-Bolt Metric Split Flange (M10 x 1.50” threads) C 1.250”, SAE 4-Bolt Split Flange CM 1.250”, SAE 4-Bolt Metric Split Flange (M12 x 1.75” threads) D 1.50”, SAE 4-Bolt Split Flange DM 1.50”, SAE 4-Bolt Metric Split Flange (M14 x 2.0” threads) W #20 SAE (1 5/8” - 12) Straight Thread X #24 SAE (1 7/8” - 12) Straight Thread Y #30 SAE (2 1/2” - 12) Straight Thread Contact factory for other requirements. 8 (Rear Cover) Order Code Description 2 Standard Single Pump Rear Cover (no options) 9 (Shaft Seal) Order Code Description A Single Shaft Seal (30 PSI) D High Pressure (100 PSI) G Double Shaft Seals, Outer Inverted, Buna (for wet mounting applications) H Double Shaft Seals, Outer Inverted, Viton (for wet mounting applications) K Double Shaft Seals, Excluder Outer, Buna Inner (for dry mounting applications) M Double Shaft Seals, Excluder Outer, Viton Inner (for dry mounting applications) X None Model Code for F30 Series Single Pumps 10 (Drive Shaft) Order Code Description 1 SAE “C” Straight Keyed, 1.250” Diameter, 1.875” Ext. 5 Tapered Threaded (1.50” taper per foot) 12 SAE “C” 14-Tooth Spline, Flat Root-Side Fit Contact factory for other requirements. 11 (Port Positions) Order Code Description A Side Inlet / Side Outlet B Side Inlet / Rear Outlet C Rear Inlet / Side Outlet D Rear Inlet / Rear Outlet 12 (Design Designation) Order Code Description 10 Standard 13 (Rotation) Order Code Description L Counterclockwise Rotation R Clockwise Rotation EXAMPLE: (F3)- F30- C- 4 - E- 30- C - 2- A -12- A- 10 - L Special Seals Series Mount Type Front Cover Inlet Port Displacements Outlet Port Rear Cover Shaft Seal Drive Shaft Port Positions Design Rotation 1 2 3 4 5 6 7 8 9 10 11 12 13 quality products for mechanical & fluid power ~ jbj Techniques Limited, www.jbj.co.uk UK distributor for Concentric Hydraulics
RkJQdWJsaXNoZXIy NzQyNjQ=