Concentric AB-F20/F30 PMP-2011-06 17 Model Code for F2020 Series Double Pumps EXAMPLE: (F3)- F2020- W- 6 - E- 15- B - + - 11-B- 12- A- 10 - L Special Seals Series Mount Front Cover Inlet Port Displacements Front Section Outlet Displacements Rear Section Outlet Drive Shaft Shaft Seal Design Designation Rotation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Rear Section Inlet ORDERING INFORMATION Each option has been assigned an order code -- listed in the tables below -- for placement in the sequence shown at right. 1 (Special Seals) Order Code Description F3 Viton Seal Omit Standard 2 (Series) Order Code Description F2020 F2020 Series Double Gear Pump 3 (Mount) Order Code Description W Wet Mount Flange (pilot diameter sealing and provides for optional double shaft seal) 4 (Front Cover) Order Code Description 2 SAE “B” 2-Bolt Mount 3 SAE “B” 4-Bolt Mount (Contact Factory) 6 SAE “B” 2/4-Bolt Combination Mount (wet mount only) 8 SAE “C” 2/4-Bolt Mount 5 (Inlet Port) Order Code Description D 1.50”, SAE 4-Bolt Split Flange DM 1.50”, SAE 4-Bolt Metric Split Flange (M14 x 2.0” threads) E 2.00”, SAE 4-Bolt Split Flange EM 2.00”, 4-Bolt Metric Split Flange (M14 x 2.0” threads) F 2.50”, SAE 4-Bolt Split Flange FM 2.50”, 4-Bolt Metric Split Flange (M14 x 2.0” threads) Contact factory for other requirements. 6 (Displacements, Front Section) Order Code Cm 3 /In 3 Order Code Cm 3 /In 3 7- 23 cc/1.41 in. 3 17- 55 cc/3.33 in. 3 9- 29 cc/1.79 in. 3 19- 62 cc/3.77 in. 3 11- 36 cc/2.18 in. 3 21- 68 cc/4.13 in. 3 13- 43 cc/2.60 in. 3 24- 77 cc/4.71 in. 3 15- 48 cc/2.94 in. 3 27- 87 cc/5.30 in. 3 SAE Rated Flow, GPM @ 1200 RPM, 100 PSI 7 (Front Section Outlet) Order Code Description A .750”, SAE 4-Bolt Split Flange AM .750”, SAE 4-Bolt Metric Split Flange (M10 x 1.50” threads) B 1.00”, SAE 4-Bolt Split Flange BM 1.00”, SAE 4-Bolt Metric Split Flange (M10 x 1.50” threads) C 1.250”, SAE 4-Bolt Split Flange CM 1.250”, SAE 4-Bolt Metric Split Flange (M12 x 1.75” threads) S #10 SAE (.875” - 12) Straight Thread T #12 SAE (1 1/16” - 12) Straight Thread V #16 SAE (1 5/16” - 12) Straight Thread Contact factory for other requirements. 8 (Rear Section Inlet) (Contact factory) Order Code Description + None 9 (Displacements, Rear Section) Order Code Cm 3 /In 3 Order Code Cm 3 /In 3 7- 23 cc/1.41 in. 3 17- 55 cc/3.33 in. 3 9- 29 cc/1.79 in. 3 19- 62 cc/3.77 in. 3 11- 36 cc/2.18 in. 3 21- 68 cc/4.13 in. 3 13- 43 cc/2.60 in. 3 24- 77 cc/4.71 in. 3 15- 48 cc/2.94 in. 3 27- 87 cc/5.30 in. 3 SAE Rated Flow, GPM @ 1200 RPM, 100 PSI 10 (Rear Section Outlet) Order Code Description A .750”, SAE 4-Bolt Split Flange AM .750”, SAE 4-Bolt Metric Split Flange (M10 x 1.50” threads) B 1.00”, SAE 4-Bolt Split Flange BM 1.00”, SAE 4-Bolt Metric Split Flange (M10 x 1.50” threads) S #10 SAE (.875” - 12) Straight Thread T #12 SAE (1 1/16” - 12) Straight Thread V #16 SAE (1 5/16” - 12) Straight Thread Contact factory for other requirements. 11 (Drive Shaft) Order Code Description 1 SAE “B” Straight Keyed, .875” Diameter, 1.312” Ext. 12 SAE “B” 14-Tooth Spline, Flat Root-Side Fit 21 SAE “BB” Straight Keyed, 1.00” Diameter, 1.50” Ext. 99 SAE “BB” 15-Tooth Spline, Flat Root-Side Fit Contact factory for other requirements. 12 (Shaft Seal) Order Code Description A Single Shaft Seal (30 PSI) D High Pressure (100 PSI) G Double Shaft Seals, Outer Inverted, Buna (for wet mounting applications) H Double Shaft Seals, Outer Inverted, Viton (for wet mounting applications) K Double Shaft Seals, Excluder Outer, Buna Inner (for dry mounting applications) M Double Shaft Seals, Excluder Outer, Viton Inner (for dry mounting applications) X None 13 (Design Designation) Order Code Description 10 Standard 14 (Rotation) Order Code Description R Clockwise Rotation L Counterclockwise Rotation quality products for mechanical & fluid power ~ jbj Techniques Limited, www.jbj.co.uk UK distributor for Concentric Hydraulics
RkJQdWJsaXNoZXIy NzQyNjQ=