Concentric AB-F15 PMP-USA-2011-6 13 DRIVE SHAFTS * Applies to coaxial applications only. Consult representative if application requires greater capacity or has side loads. For shaft options not shown, contact factory for speci c shaft information. SAE “B” STRAIGHT KEY Shaft No. 1: For F15, F1509 & F1515 Pumps 292.6 Nm (2590 in. lb.) torsional capacity.* [41.15] 1.62 1.312 [33.32] 1.062 [26.97] full depth .250 [6.356] sq. / 1.00 [25.40] long key .987 [25.07] .977 [24.82] .030 [.76] .020 [.51] R. .875 .874 [22.22] [22.20] Dia. SAE “B” INVOLUTE SPLINE Shaft No. 12: For F15, F1509 & F1515 Pumps 279.6 Nm (2475 in. lb.) torsional capacity.* Flat Root - Side Fit No. of Teeth - 13 Diametral Pitch - 16/32 Pressure Angle - 30° [41.15] 1.62 [12.7] .50 .060 [1.52] x 45° [33.32] 1.312 .060 [1.52] .090 [2.29] R. SAE “B-B” INVOLUTE SPLINE Shaft No. 99: For F15, F1509, F1515 & F151515 Pumps 451.9 Nm (4000 in. lb.) torsional capacity.* Flat Root - Side Fit No. of Teeth - 15 Diametral Pitch - 16/32 Pressure Angle - 30° [45.97] 1.81 [12.7] .50 [38.10] 1.50 quality products for mechanical & fluid power ~ jbj Techniques Limited, www.jbj.co.uk UK distributor for Concentric Hydraulics
RkJQdWJsaXNoZXIy NzQyNjQ=