Concentric AB-D SERIES PUMPS-US-2011-6 4 .252”TANG DRIVE ORDER CODE 8 FLEX COUPLING DRIVE ORDER CODE 3 .171”TANG DRIVE ORDER CODE 2 SAE “A”TAPERED ORDER CODE 7 SAE “A” 9 TOOTH SPLINE ORDER CODE 9 SAE “A” 5/8“ STRAIGHT KEYED ORDER CODE 1 A critical element which must be considered when specifying a D Series pump for your application is the shaft drive system. Concentric has both the product and the application experience to insure that your D Series pump incorporates the correct shaft for your application. The following depict the 8 standard shaft options for the D Series pump. Our exible manufacturing capabilities can accommodate a wide variety of shaft con gurations. Shaft Options 8.3 7.5 [.328] [.285] 6.22 6.15 [.245] [.242] 6.4 6.0 [.250] [.234] FLAT 15.85 15.79 [.624] [.622] ø 3.2 2.4 [.13] [.09] 1/4-20 UNC-2B X 12.7 [.50] DEEP 5.16 [.203] 2.79 [.110] 11.00 10.95 [.433] [.431] 14.96 14.91 [.589] [.587] ø 44.2 43.2 [1.74] [1.70] 18.5 18.1 [.73] [.71] 2.13 1.88 [.084] [.074] 1:8 TAPER SPRING LOCKWASHER (ANSI B18.21.1 1972) 1/2-20 UNF-2B HEX NUT TORQUE 50 + 10 Nm [37 + 7 LB.FT.] #505 WOODRUFF KEY (ANSI B17.2-1967 R1978) 16.1 15.6 [.635] [.615] ø 31.75 [1.25] 24.63 21.33 [.97] [.84] FULL SPLINE 8.17 [.322] 2X R 3.96 [.156] 4.36 4.31 [.172] [.170] FLAT 5.15 4.77 [.203] [.188] 15.87 15.86 [.6250] [.6247] 55.37 [2.18] .76 [.03] X 45º 17.72 [.698] 4.77 [.188] SQ. X 25.4 [1.00] LONG KEY 15.87 15.86 [.6250] [.6247] ø EXTERNAL INVOLUTE SPLINE 16/32 DP, 9 TOOTH, FLAT ROOT, SIDE FIT ø 15.46 15.32 [.608] [.603] Ø quality products for mechanical & fluid power ~ jbj Techniques Limited, www.jbj.co.uk UK distributor for Concentric Hydraulics
RkJQdWJsaXNoZXIy NzQyNjQ=