 GGR Cast Iron Bellhousings
ATEX certificated to
directive 94/9/EC requirements |
Directive
94/9/EC II2GD-IM2-T6,
Harmonised standards EN13463-4, EN13463-5, EN50303, EN13463-1 |
 |
jbj
Techniques Limited has long been established as a quality supplier
of bellhousings and shaft couplings for hydraulic pump drives.
We have been manufacturing the range of JXL anti-static couplings
and cast iron bellhousings in the UK since 1984, specifically
for use in hazardous areas.
The cast iron range of bellhousings, prefix GG is also available
in high strength (SG) iron, prefix GGG, in addition we produce
this range to suit NEMA motor flange dimensions without the use
of adaptor plates.
These bellhousings are a one-piece component founded in the UK
with minimal (trace) aluminium, magnesium, titanium and zirconium
content.
Final machining is effected at jbj premises. In some instances
a steel flange may be bolted to the pump mounting face to facilitate
the fitment of larger pumps. The bellhousings have been subject
to a 20 Joule impact test with no damage noted.
If required the housings can be supplied with full chemical analysis
and test bars. This must be requested at the time of ordering.
A surcharge will apply. |
|
See
our on-line Equipment for Hazardous Areas catalogue, pages 7 - 12 for further
details >>
|
|
Other
ATEX approved components include:-
> Back
to ATEX products
<
|
 |
|
jbj
Techniques Limited is ISO certificated, committed to international
coordination & unification of industrial standards |
|
© Copyright, jbj Techniques Limited,
28 Trowers Way, Holmethorpe Industrial Estate, Redhill, Surrey
RH1 2LW. United Kingdom of Great Britain. telephone: +44(0)1737
767493 email:info@jbj.co.uk
E. & O. E., Disclaimer: Information throughout this web-site
relevant to design, materials and/or specifications are subject
to change without notice and liability therefore.
|
